Insignia Clock Radio NS CL02 User Manual

User Guide  
CD Clock Radio  
NS-CL02  
 
Insignia NS-CL02  
CD Clock Radio  
Contents  
Welcome  
Congratulations on your purchase of a high-quality Insignia product.  
Your NS-CL02 represents the state of the art in clock radios and is  
designed for reliable and trouble-free performance.  
Safety information  
To prevent fire or shock hazard, do not plug the power adapter into an  
extension cord, receptacle, or other outlet unless the blades can be  
fully inserted to prevent blade exposure. To prevent fire or shock  
hazard, do not expose this appliance to rain or moisture.  
CAUTION: To reduce the risk of electric  
shock, do not remove cover (or back). No  
user-serviceable parts inside. Refer  
servicing to qualified service personnel.  
The lightning flash with arrowhead symbol within a  
triangle is intended to alert you to the presence of  
uninsulated dangerous voltage within your clock radio’s  
enclosure that may be of sufficient magnitude to  
constitute risk of electric shock to persons.  
3
 
   
Insignia NS-CL02 CD Clock Radio  
The exclamation point within a triangle is intended to  
alert you to the presence of important operating and  
maintenance (servicing) instructions in the literature  
accompanying your clock radio.  
Danger - Invisible and hazardous laser radiation when  
the CD compartment is open and the interlock fails or is  
defeated. Avoid direct exposure to beam.  
Caution  
Any change or modification to your clock radio not expressly  
approved by Insignia or its authorized parties could void  
your authority to operate your shelf system.  
Caution  
Your clock radio should not be exposed to water (dripping or  
splashing) and no objects filled with liquids, such as vases,  
should be placed on it.  
Important safeguards  
Read instructions—Read all the safety and operating  
instructions before operating your clock radio.  
Retain instructions—Retain the safety and operating  
instructions for future reference.  
Follow warnings—Follow all warnings on your clock radio and  
in the operating instructions.  
Follow instructions—Follow all operating and use  
instructions.  
Cleaning—Unplug your clock radio’s AC power adapter from  
the power outlet before cleaning. Do not use liquid cleaners or  
aerosol cleaners. Use a damp cloth for cleaning.  
Attachments—Do not use attachments not recommended by  
Insignia because they may cause hazards.  
Water and moisture—Do not use your clock radio near water.  
Such as near a bath tub, in a wet basement, or near a  
swimming pool.  
VentilationTo ensure reliable operation of your clock radio  
and to protect it from overheating, ventilation slots and  
openings are provided in the cabinet back. Do not block these  
openings. Your clock radio should never be placed near or over  
a radiator or heat register. Do not place your clock radio in a  
built-in installation such as a bookcase or rack unless correct  
ventilation is provided or the manufacturer’s instructions have  
been adhered to.  
4
 
 
Insignia NS-CL02 CD Clock Radio  
Power sources—Use only the type of power source indicated  
on the label. If you are not sure of the type of power supply to  
your home, consult Insignia Technical Support or your local  
power company. For clock radios intended to operate from  
battery power or other sources, refer to the operating  
instructions.  
Grounding or polarizationYour clock radio’s AC power  
adapter may be equipped with a polarized alternating-current  
line plug (a plug having one blade wider than the other). This  
plug will fit into the power outlet only one way. This is a safety  
feature. If you are unable to insert the plug fully into the outlet,  
try reversing the plug. If the plug should still fail to fit, contact  
your electrician to replace your obsolete outlet. Do not defeat  
the safety purpose of the polarized plug.  
Power cord protection—Route power supply cords so that  
they are not likely to be walked on or pinched by items placed  
upon or against them, paying particular attention to cords at  
plugs, convenience receptacles, and the point where they exit  
from your clock radio.  
Surge protector—We recommend the use of a surge  
protector for the AC power adapter connection. Lightning and  
power surges ARE NOT covered under warranty for this  
product.  
Lightning—For added protection for your clock radio during a  
lightning storm, or when it is left unattended and unused for  
long periods of time, unplug the AC power adapter from the  
power outlet. This will prevent damage to your clock radio due  
to lightning and power line surges.  
Overloading—Do not overload power outlets and extension  
cords, because this can result in a risk of fire or electric shock.  
Object and liquid entry—Never insert objects of any kind into  
your clock radio through openings, because they may touch  
dangerous voltage points or short out parts that could result in  
a fire or electric shock. Never spill liquid of any kind on your  
clock radio.  
Servicing—Do not attempt to service your clock radio yourself,  
because opening or removing covers may expose you to  
dangerous voltage or other hazards. Refer all servicing to  
qualified service personnel.  
Damage requiring service—Unplug your clock radio’s AC  
power adapter from the power outlet and refer servicing to  
qualified service personnel under the following conditions:  
When the power supply cord or plug is damaged or frayed.  
If liquid has been spilled, or objects have fallen into your  
clock radio.  
If your clock radio has been exposed to rain or water.  
5
 
Insignia NS-CL02 CD Clock Radio  
If your clock radio does not operate normally by following  
the operating instructions. Adjust only those controls that  
are covered by the operating instructions, because incorrect  
adjustment of other controls may result in damage and  
often requires extensive work by a qualified technician to  
restore your clock radio to its normal operation.  
If your clock radio has been dropped or damaged in any  
way.  
When your clock radio exhibits a distinct change in  
performance.  
Replacement parts—When replacement parts are required,  
make sure that the service technician uses replacement parts  
specified by the manufacturer that have the same  
characteristics as the original part. Unauthorized substitutions  
may result in fire, electric shock, injury to persons, or other  
hazards.  
Safety check—Upon completion of any service or repairs to  
your clock radio, ask the service technician to perform routine  
safety checks to determine that your clock radio is in correct  
operating condition.  
Heat—Place your clock radio away from heat sources such as  
radiators, heat registers, stoves, or other products (including  
amplifiers) that produce heat.  
Caution  
To prevent electric shock, match the wide blade of the AC  
power adapter plug to the wide slot in the power outlet and  
fully insert the plug.  
The AC power adapter plug is used as the disconnect device. It  
should remain readily accessible and should not be obstructed during  
use. To completely disconnect the clock radio from electric power, the  
AC power adapter plug should be disconnected from the AC power  
outlet completely.  
The marking plate of the AC power adapter is located on the bottom  
of the adapter.  
Features  
Package contents:  
Clock radio  
AC power adapter  
Line-in cable  
AAA batteries (2)  
User Guide  
6
 
 
Insignia NS-CL02 CD Clock Radio  
Top panel  
DISPLAY  
STANDBY / ON  
FUNCTION  
MODE  
ALARM  
ALARM  
1
2
EQ  
MEMORY/  
ALBUM  
PUSH  
OPEN CLOSE  
TIME SET/  
BAND  
PRESET  
TUNE  
VOLUME  
S N O O Z E / S L E E P  
#
Description  
Function  
1
DISPLAY button  
Press to show the current function, such as CD, radio,  
or line-in mode.  
2
3
FUNCTION button  
EQ button  
Press to select AM, FM, Line-in, or CD.  
Press to select a preset equalization setting.  
Selections include Flat, Jazz, Pop, Classic, and  
Rock.  
4
MEMORY/ALBUM  
button  
In radio mode, press to set radio presets and press to  
recall radio presets.  
In CD (MP3) mode, press to skip forward to the next  
album.  
7
 
Insignia NS-CL02 CD Clock Radio  
#
Description  
Function  
5
PLAY/PAUSE/PRESET In CD mode, press to begin CD playback. Press again  
button  
to pause playback.  
In radio mode, press repeatedly to cycle through  
preset stations.  
6
7
SKIP+/FF/TUNE UP  
button  
In CD mode, press to skip forward a track. Press and  
hold to search forward through a track.  
In radio mode, press to tune or scan the radio to a  
higher frequency.  
In alarm mode, press to select Buzzer, Radio, or CD.  
SKIP– /FR/TUNE  
DOWN button  
In CD mode, press to skip backward a track. Press and  
hold to search backward through a track.  
In radio mode, press to tune or scan the radio to a  
lower frequency.  
8
9
SNOOZE/SLEEP button Press to temporarily turn off the alarm or to set the  
sleep timer when playing the radio or CD.  
In alarm mode, press to select Buzzer, Radio, or CD.  
Standby/ON button  
Press to turn on the clock radio. Press again to return  
the clock radio to standby mode.  
10 MODE button  
In FM radio mode, press to choose between FM  
MONO and FM STEREO.  
In CD mode, press to select One Repeat Play, Repeat  
Album, All Repeat Play, Intro Play, or Random Play  
mode.  
11 ALARM 1 button  
12 ALARM 2 button  
Press to select and change settings for Alarm mode 1.  
Press to select and change settings for Alarm mode 2.  
13 STOP/BAND/TIME SET In CD mode, press to stop playback.  
button  
In radio mode, press to select the radio frequency  
band to listen to (AM or FM).  
In standby mode, press and hold to enter time set  
mode.  
14 OPEN/CLOSE button  
15 LCD display  
Press to open the CD compartment. Press again to  
close the CD compartment.  
Displays the current time, as well as information about  
the radio or CD.  
16 VOL + button  
17 VOL – button  
Press to increase the volume of the radio or CD.  
Press to decrease the volume of the radio or CD.  
8
 
Insignia NS-CL02 CD Clock Radio  
Side panel  
#
Description  
Function  
1
Dimmer  
Move this switch to set the LCD backlight level  
to High, Mid, or Low.  
2
3
Headphone jack  
Line in jack  
Connect a headphone plug to this jack to listen  
to the radio or a CD through headphones.  
Note: Plugging in a headphone automatically  
mutes the speaker.  
Connect a cable from an external audio source  
to this input jack to hear the sound through your  
clock radio.  
4
5
DC IN jack  
Speaker  
Insert the small connector from the AC power  
adapter here.  
Provides audible sound from the radio or CD  
player.  
9
 
Insignia NS-CL02 CD Clock Radio  
Bottom  
#
Description  
Battery compartment door  
Function  
1
Open this door to install backup batteries for  
your clock radio.  
10  
 
Insignia NS-CL02 CD Clock Radio  
LCD Display  
Setting up your clock radio  
Using the AC power adapter  
To use the AC power adapter:  
1 Insert the small connector at the end of the AC power adapter  
cable into the DC IN jack on the back of your clock radio.  
2 Plug the AC power adapter into a wall power outlet.  
Note  
Only use the supplied AC power adapter, which has the  
_
following specifications: DC=9.0 V  
+
Unplug both the DC plug and the adapter when not in use.  
Installing backup batteries  
To install backup batteries:  
1 Turn your clock radio over, then open the door to the battery  
compartment (1).  
11  
 
 
Insignia NS-CL02 CD Clock Radio  
2 Insert two (2) AAA batteries into the battery compartment. Make  
sure that you match the + and – symbols on the batteries with the  
+ and – symbols in the battery compartment.  
Insert batteries as shown  
1.5V X 2  
AAA/UM-44  
3 Reinstall and close the battery compartment and return your clock  
radio to the upright position.  
Caution  
Follow these precautions when using batteries in this  
device:  
1. Use only the size and type of batteries specified.  
2. Make sure that you follow the correct polarity as indicated  
in the battery compartment when installing batteries.  
Reversed batteries may cause damage to the clock radio.  
3. Do not mix different types of batteries together (for  
example, alkaline, rechargeable, and carbon zinc), or  
semi-used batteries with fresh ones.  
4. If your clock radio is not to be used for a long period of  
time, remove the batteries to prevent damage or injury from  
possible battery leakage.  
5. Do not try to recharge batteries not intended to be  
recharged, because they can overheat and rupture. (Follow  
battery manufacturer’s directions.)  
6. Do not throw batteries into a fire. Dispose of used  
batteries as hazardous waste.  
Note  
The batteries are used to provide backup for your clock  
when AC power adapter is disconnected or there is a power  
failure.  
When the battery indicator  
need to replace the batteries.  
appears in the display, you  
Connecting the power cord  
To prepare your clock radio for use:  
1 Make sure that your local AC power source matches the voltage  
shown on the plate located on the AC power adapter. If it does not,  
consult your dealer or service center.  
12  
 
Insignia NS-CL02 CD Clock Radio  
2 Plug the small connector on the power cable into the DC IN jack  
on the back of the clock radio and the AC power adapter itself into  
an AC power outlet.  
Caution  
To protect your clock radio during thunderstorms, unplug the  
AC power adapter from the AC power outlet.  
Using your clock radio  
Dimmer Setting  
To set the backlight level:  
1 Make sure the AC adapter is connected and the clock radio is  
turned on.  
2 Slide the dimmer switch to set the display backlight to a  
comfortable level. Your choices include High, Mid, or Low.  
Playing the radio  
To play the radio:  
1 Press  
(Standby/on) to turn on the clock radio.  
To select the radio band you want to listen to, press STOP/  
BAND/TIME SET repeatedly.  
To tune the radio up or down and select the station you  
want, press SKIP +/FF/TUNE UP or SKIP–/FR/TUNE  
DOWN.  
To adjust the volume to a comfortable level, press either the  
VOLUME UP or VOLUME DOWN button.  
To scan to a higher or lower frequency, press and hold SKIP  
+/FF/TUNE UP or SKIP–/FR/TUNE DOWN for more than  
two seconds, then release the button to search for the next  
strong station.  
To select FM MONO or FM STEREO, press MODE .  
2 Press  
(Standby/on) to turn off the clock radio.  
To use presets:  
1 Press  
(Standby/on) to turn on the clock radio.  
2 Press STOP/BAND/TIME SET repeatedly to select the radio band  
you want to listen to.  
3 Press SKIP +/FF/TUNE UP or SKIP–/FR/TUNE DOWN to tune  
the radio up or down and select the station you want.  
13  
 
 
Insignia NS-CL02 CD Clock Radio  
4 To save the station as a preset, press the MEMORY/ALBUM  
button. “PRESET” and the preset number blinks on the display.  
5 Press SKIP +/FF/TUNE UP or SKIP–/FR/TUNE DOWN to select  
the preset number you want to designate for that station.  
6 Press MEMORY/ALBUM to confirm the setting. The station is  
stored in memory.  
7 Repeat Steps 3 to 6 to store as many as 10 AM presets and 10  
FM presets.  
8 To select a preset station, briefly press PLAY/PAUSE/PRESET  
repeatedly until you reach the station you want. “PRESET”  
appears on the LCD display, along with the preset number  
selected.  
To recall presets to make changes:  
1 Press MEMORY/ALBUM in radio mode. The preset frequency  
appears on the LCD display, the radio is tuned to the preset  
frequency, and “PRESET” blinks for five seconds.  
2 Press SKIP +/FF/TUNE UP or SKIP–/FR/TUNE DOWN while  
“PRESET” is blinking to change the preset station.  
To listen to another audio device:  
1 Make sure the clock radio is turned off.  
2 Plug one end of the auxiliary line-in cable into the LINE-IN jack on  
the side of the radio.  
3 Plug the other end of the cord into the LINE-OUT jack on the  
audio device.  
4 Turn on the radio.  
5 Press FUNCTION one or more times until “LINE-IN” appears on  
the display.  
6 Use the controls on the audio device to control playback.  
14  
 
Insignia NS-CL02 CD Clock Radio  
Playing a CD  
This clock radio plays music CDs, MP3 CDs, and WMA CDs.  
To play a CD:  
1 Press  
(Standby/on) to turn on the clock radio.  
2 Press CD OPEN/CLOSE to open the CD compartment door.  
3 Insert a CD disc with the label side up, then close the CD  
compartment door.  
4 Press FUNCTION repeatedly to select CD mode.  
5 Press VOL + or VOL – to set the volume to a comfortable level.  
6 Press EQ to cycle through the available equalization presets.  
Choices include FLAT, JAZZ, POP, CLASSIC, or ROCK. A bar  
appears under your choice on the display.  
7 If you are playing a CD in MP3 format, press MEMORY/ALBUM to  
skip to the next album and play the first track. Press and hold  
MEMORY/ALBUM to skip forward tracks one-by-one within an  
album.  
8 Press STOP/BAND/TIME SET to stop playback.  
To select the playback mode:  
1 While in CD mode, press MODE repeatedly to cycle through the  
available playback modes. Choices include the following:  
One Repeat Play: Repeats the current track  
Repeat Album:  
Repeats all tracks within the current album (MP3/  
WMA only)  
All Repeat Play:  
Intro Play:  
Repeats all tracks  
Plays a 10 second intro for each track  
Plays all tracks in random order  
Random Play:  
Setting the clock and the alarm  
To set the clock:  
1 Hold STOP/BAND/TIME SET two seconds or more. The hour  
blinks on the display.  
2 Within 10 seconds, press SKIP+/FF/TUNE UP or SKIP–/FR/  
TUNE DOWN to set the hour and select the correct AM/PM  
setting.  
3 Press STOP/BAND/TIME SET again. The minute blinks on the  
display.  
15  
 
 
Insignia NS-CL02 CD Clock Radio  
4 Press SKIP +/FF/TUNE UP or SKIP–/FR/TUNE DOWN to set the  
minute. Make sure that you set the correct AM/PM setting.  
5 Press STOP/BAND/TIME SET again. The clock is set.  
To set the alarm:  
1 Press and hold ALARM 1 or ALARM 2 (depending on the alarm  
mode you want) until the hour blinks.  
2 While the hour is blinking, press SKIP+/FF/TUNE UP or SKIP-/  
FR/TUNE DOWN to set hour (AM/PM) you want to wake up.  
3 Press ALARM 1 or ALARM 2 again. The minutes begin to blink.  
4 While the minutes are blinking, press SKIP+/FF/TUNE UP or  
SKIP-/FR/TUNE DOWN to set the minute you want to wake up.  
Make sure that you set the correct AM/PM setting.  
5 Within 10 seconds, press SKIP+/FF/TUNE UP or SKIP-/FR/TUNE  
DOWN repeatedly to select CD, RADIO, or BUZZER as the alarm  
source. Make sure that the corresponding indicator appears on  
the display. If you select RADIO, the frequency of last setting will  
display on display  
6 Press ALARM 1 or ALARM 2 again to confirm the setting.  
7 To turn on the alarm, press ALARM 1 or ALARM 2 in standby  
mode.  
8 To cancel the alarm, press ALARM 1 or ALARM 2 until the alarm  
indicator disappears from the display. The alarm will not come on  
until it is reset.  
Notes  
In Standby mode, press ALARM 1 or ALARM 2 to activate  
the alarm. ALARM 1 (or ALARM 2) and BUZZER appear  
on the display. Press SKIP+/FF/TUNE UP or SKIP-/FR/  
TUNE DOWN to cycle through the alarm options (BUZZER,  
CD, RADIO, or OFF).  
The alarm automatically changes to BUZZER if the CD  
cannot play.  
The alarm automatically switches off after 60 minutes if no  
key is pressed during the alarm set.  
16  
 
Insignia NS-CL02 CD Clock Radio  
To turn the alarm off:  
1 Press ALARM 1, ALARM 2, STANDBY ON (except SNOOZE/  
SLEEP) to turn off the alarm. The alarm will be set for the next  
day.  
2 If you do not want to set the alarm for the next day, press  
ALARM 1 or ALARM 2 until “ALARM 1” or “ALARM 2” disappears  
from the display.  
To use the snooze:  
1 While the alarm is sounding, press SNOOZE/SLEEP. The  
SNOOZE indicator appears on the display and “10” appears in the  
display for five seconds, then it reverts back to the real time. The  
alarm turns back on automatically 10 minutes later.  
2 If you press SNOOZE/SLEEP within those five seconds, each  
time you press the SNOOZE/SLEEP button, the snooze time  
increases by ten minutes up to 60 minutes.  
After you set snooze, the real time will display. Press SNOOZE/  
SLEEP again to view the remaining snooze time for five seconds.  
3 To cancel snooze (the alarm will not turn back on), press  
ALARM 1 or ALARM 2 or standby on (depending on the alarm  
that was set). The SNOOZE indicator disappears from the display.  
To set the sleep timer:  
1 Make sure the clock radio is turned on.  
2 Press SNOOZE/SLEEP once. The “SLEEP” indicator appears in  
the display, and “90” appears (blinking) on the display (indicating  
that the clock radio will turn off after 90 minutes).  
3 Repeatedly press SNOOZE/SLEEP to decrease the sleep timer in  
10 minute increments.  
4 After you set the sleep timer, the real time displays. Press  
SNOOZE/SLEEP again to view the remaining sleep time for five  
seconds.  
5 To cancel the sleep function, repeatedly press SNOOZE/SLEEP  
until “0” shows on the display.  
17  
 
Insignia NS-CL02 CD Clock Radio  
Troubleshooting  
Caution  
Do not try to repair the clock radio yourself. Doing so will  
invalidate your warranty.  
Problem  
Possible cause  
Solution  
The CD does  
not play  
The disc may be inserted  
incorrectly.  
Check the disc and insert it  
correctly.  
The disc may be dirty or  
defective.  
Check the disc and make sure that  
is clean and not bent or scratched.  
The pickup lens may be dirty.  
Clean the pickup lens.  
There is moisture or  
condensation in the player.  
Let the player warm up to room  
temperature for 60 minutes, then  
try again.  
The source is not set to CD.  
Set the source to CD.  
Intermittent  
sound  
The disc may be dirty or  
defective.  
Check the disc and make sure that  
is clean and not bent or scratched.  
The pickup lens may be dirty.  
The player is being subjected  
Clean the pickup lens.  
Place the player on a stable  
to excessive vibration or shock. surface.  
Poor headphone connection.  
Make sure that the headphones are  
firmly plugged in.  
Noise or sound FM—The antenna wire is not  
distorted on AM extended.  
Extend the FM antenna.  
or FM radio  
AM—The radio is not  
broadcasts  
Rotate the radio until the best  
reception is obtained.  
positioned correctly.  
No sound  
The volume control is turned  
down.  
Increase the volume.  
The AC power adapter is  
unplugged.  
Plug in the AC power adapter and  
press  
(Standby/on) to turn on  
the radio.  
No sound from The headphone plug is not  
Plug in the headphone connector  
firmly.  
headphones  
inserted fully into the  
headphone jack.  
No sound in  
Line-in mode  
The external device is not  
connected correctly.  
Make sure that the connection is  
correct.  
The alarm does The alarm is not activated or  
Set and activate the alarm as  
not turn on  
set correctly.  
The clock is not set.  
Set the clock.  
18  
 
 
Insignia NS-CL02 CD Clock Radio  
Legal notices  
FCC Part 15  
This device complies with Part 15 of the FCC Rules. Operation of this product is  
subject to the following two conditions: (1) this device may not cause harmful  
interference, and (2) this device must accept any interference received, including  
interference that may cause undesired operation.  
This equipment has been tested and found to comply within the limits for a class B  
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to  
provide reasonable protection against harmful interference in a residential installation.  
This equipment generates, uses, and can radiate radio frequency energy and, if not  
installed and used in accordance with the instructions, may cause harmful interference  
to radio communications. However, there is no guarantee that interference will not  
occur in a particular installation. If this equipment does cause harmful interference to  
radio or television reception, which can be determined by turning the equipment off and  
on, the user is encouraged to try to correct the interference by one or more of the  
following measures:  
Reorient or relocate the receiving antenna.  
Increase the separation between the equipment and receiver.  
Connect the equipment into an outlet on a circuit different from that to which the  
receiver is connected.  
Consult the dealer or an experienced technician for help.  
19  
 
 
Insignia NS-CL02 CD Clock Radio  
20  
 
Insignia NS-CL02 CD Clock Radio  
90-Day Limited Warranty  
Insignia Products (“Insignia”) warrants to you, the original purchaser of this new  
NS-CLO2 (“Product”), that the Product shall be free of defects in the original  
manufacture of the material or workmanship for a period of 90 days from the date of  
your purchase of the Product (“Warranty Period”). This Product must be purchased  
from an authorized dealer of Insignia brand products and packaged with this warranty  
statement. This warranty does not cover refurbished Product. If you notify Insignia  
during the Warranty Period of a defect covered by this warranty that requires service,  
terms of this warranty apply.  
How long does the coverage last?  
The Warranty Period lasts for 90 days from the date you purchased the Product. The  
purchase date is printed on the receipt you received with the Product.  
What does this warranty cover?  
During the Warranty Period, if the original manufacture of the material or workmanship  
of the Product is determined to be defective by an authorized Insignia repair center or  
store personnel, Insignia will (at its sole option): (1) repair the Product with new or  
rebuilt parts; or (2) replace the Product at no charge with new or rebuilt comparable  
products or parts. Products and parts replaced under this warranty become the  
property of Insignia and are not returned to you. If service of Products or parts are  
required after the Warranty Period expires, you must pay all labor and parts charges.  
This warranty lasts as long as you own your Insignia Product during the Warranty  
Period. Warranty coverage terminates if you sell or otherwise transfer the Product.  
How to obtain warranty service?  
If you purchased the Product at a retail store location, take your original receipt and the  
Product to the store you purchased it from. Make sure that you place the Product in its  
original packaging or packaging that provides the same amount of protection as the  
original packaging. If you purchased the Product from an online web site, mail your  
original receipt and the Product to the address listed on the web site. Make sure that  
you put the Product in its original packaging or packaging that provides the same  
amount of protection as the original packaging.  
To obtain in-home warranty service for a television with a screen 25 inches or larger,  
call 1-888-BESTBUY. Call agents will diagnose and correct the issue over the phone or  
will have an Insignia-approved repair person dispatched to your home.  
Where is the warranty valid?  
This warranty is valid only to the original purchaser of the product in the United States,  
Canada, and Mexico.  
What does the warranty not cover?  
This warranty does not cover:  
Customer instruction  
Installation  
Set up adjustments  
Cosmetic damage  
Damage due to acts of God, such as lightning strikes  
Accident  
Misuse  
Abuse  
Negligence  
Commercial use  
21  
 
 
Insignia NS-CL02 CD Clock Radio  
Modification of any part of the Product, including the antenna  
Plasma display panel damaged by static (non-moving) images applied for lengthy  
periods (burn-in).  
This warranty also does not cover:  
Damage due to incorrect operation or maintenance  
Connection to an incorrect voltage supply  
Attempted repair by anyone other than a facility authorized by Insignia to service  
the Product  
Products sold as is or with all faults  
Consumables, such as fuses or batteries  
Products where the factory applied serial number has been altered or removed  
REPAIR REPLACEMENT AS PROVIDED UNDER THIS WARRANTY IS YOUR  
EXCLUSIVE REMEDY. INSIGNIA SHALL NOT BE LIABLE FOR ANY INCIDENTAL  
OR CONSEQUENTIAL DAMAGES FOR THE BREACH OF ANY EXPRESS OR  
IMPLIED WARRANTY ON THIS PRODUCT, INCLUDING, BUT NOT LIMITED TO,  
LOST DATA, LOSS OF USE OF YOUR PRODUCT, LOST BUSINESS OR LOST  
PROFITS. INSIGNIA PRODUCTS MAKES NO OTHER EXPRESS WARRANTIES  
WITH RESPECT TO THE PRODUCT, ALL EXPRESS AND IMPLIED WARRANTIES  
FOR THE PRODUCT, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED  
WARRANTIES OF AND CONDITIONS OF MERCHANTABILITY AND FITNESS FOR  
A PARTICULAR PURPOSE, ARE LIMITED IN DURATION TO THE WARRANTY  
PERIOD SET FORTH ABOVE AND NO WARRANTIES, WHETHER EXPRESS OR  
IMPLIED, WILL APPLY AFTER THE WARRANTY PERIOD. SOME STATES,  
PROVINCES AND JURISDICTIONS DO NOT ALLOW LIMITATIONS ON HOW LONG  
AN IMPLIED WARRANTY LASTS, SO THE ABOVE LIMITATION MAY NOT APPLY TO  
YOU. THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY  
ALSO HAVE OTHER RIGHTS, WHICH VARY FROM STATE TO STATE OR  
PROVINCE TO PROVINCE.  
Contact Insignia:  
For customer service please call 1-877-467-4289  
Distributed by Best Buy Purchasing, LLC  
7601 Penn Avenue South, Richfield, Minnesota, U.S.A. 55423-3645  
© 2008 Best Buy Enterprise Services, Inc.  
All rights reserved. INSIGNIA is a trademark of Best Buy Enterprise Services, Inc.  
Registered in some countries. All other products and brand names are trademarks of  
their respective owners.  
22  
 
Insignia NS-CL02 CD Clock Radio  
23  
 
(877) 467-4289  
Distributed by Best Buy Purchasing, LLC  
7601 Penn Avenue South, Richfield, MN USA 55423-3645  
© 2008 Best Buy Enterprise Services, Inc.  
All rights reserved. INSIGNIA is a trademark of Best Buy Enterprise Services, Inc. Registered in some countries.  
All other products and brand names are trademarks of their respective owners.  
iPod® is a trademark of Apple Computer, Inc., registered in the U.S. and other countries.  
ENGLISH  
08-1466  
 

Indesit Refrigerator IN C 325 AI UK User Manual
Ingersoll Rand Outboard Motor AF1260 XX User Manual
Insignia Car Amplifier NS A1000 User Manual
ION Turntable CD DIRECT User Manual
Jonsered Lawn Mower LM2150 User Manual
JVC Digital Camera GR D94 User Manual
JVC Digital Camera GR D350U User Manual
Kambrook Fan KFH340 User Manual
Kettler Bicycle KC112 500 User Manual
Kidde Smoke Alarm 0910UK User Manual