Insignia Clock Radio NS CLOPP1 User Manual

User Guide  
Digital Clock Radio with FM  
NS-CLOPP1  
Before using your new product, please read these instructions to prevent any damage.  
 
Insignia NS-CLOPP1 Digital Clock Radio with FM  
Important safety instructions  
1
2
3
4
5
6
7
Read these instructions.  
Keep these instructions.  
Heed all warnings.  
Follow all instructions.  
Do not use this apparatus near water.  
Clean only with dry cloth.  
Do not block any ventilation openings. Install in accordance with the  
manufacturer's instructions.  
8
9
Do not install near any heat sources such as radiators, heat registers,  
stoves, or other apparatus (including amplifiers) that produce heat.  
Do not defeat the safety purpose of the polarized or grounding-type plug.  
A polarized plug has two blades with one wider than the other. A  
grounding type plug has two blades and a third grounding prong. The  
wide blade or the third prong are provided for your safety. If the provided  
plug does not fit into your outlet, consult an electrician for replacement of  
the obsolete outlet.  
10 Protect the power cord from being walked on or pinched particularly at  
plugs, convenience receptacles, and the point where they exit from the  
apparatus.  
11 Only use attachments/accessories specified by the manufacturer.  
12 Unplug this apparatus during lightning storms or when unused for long  
periods of time.  
13 Refer all servicing to qualified service personnel. Servicing is required  
when the apparatus has been damaged in any way, such as power-supply  
cord or plug is damaged, liquid has been spilled or objects have fallen into  
the apparatus, the apparatus has been exposed to rain or moisture, does  
not operate normally, or has been dropped.  
14 To reduce the risk of fire or electric shock, do not expose this device to  
rain, moisture, dripping, or splashing, and no objects filled with liquids,  
such as vases, shall be placed on it.  
15 The wall plug is the disconnecting device. The plug must remain readily  
operable.  
16 Batteries should not be exposed to excessive heat such as sunshine, fire, or  
the like.  
Caution  
Danger of explosion if battery is incorrectly replaced. Replace  
only with the same or equivalent type.  
3
 
 
Insignia NS-CLOPP1 Digital Clock Radio with FM  
Features  
Top buttons  
3
5
7
1
2
4
6
Preset  
Sleep  
1
2
Source  
9
10  
8
#
Item  
Description  
1
Preset  
button  
button  
Press to program a radio station preset or to tune to a preset radio  
station. See “Programming a radio station preset” on page 12 or  
“Tuning to a preset radio station” on page 12.  
2
3
Sleep  
Press to set the time or the sleep timer. For more information, see  
“Setting the time” on page 8 or “Setting the sleep timer” on page 10.  
(previous/fast reverse) button Press and hold for one second to go to the next lower radio station.  
Quickly press and release to manually tune to a lower radio frequency.  
1
4
5
(Alarm 1) button  
Press to set Alarm 1. See “Setting the alarm sound” on page 9 and  
“Setting the alarm time” on page 9.  
(next/fast forward) button  
Press and hold for one second to go to the next higher radio station.  
Quickly press and release to manually tune to a higher radio  
frequency.  
2
6
7
(Alarm 2) button  
Press to set Alarm 2. See “Setting the alarm sound” on page 9 and  
“Setting the alarm time” on page 9.  
SNOOZE / DIMMER  
button  
When the alarm turns on, press to turn off the alarm for 10 minutes.  
See “Using the snooze feature” on page 10.  
Press to adjust the LCD brightness. See “Adjusting the LCD brightness”  
on page 11.  
8
Source  
(source/standby) button When your radio is turned off (in standby mode), press to turn it on.  
See “Playing your radio” on page 11.  
When your radio is turned on, press and hold for more than two  
seconds to turn your radio off (put in standby mode).  
When your radio is turned on, quickly press and release to switch  
between playing the radio and playing a connected audio device. See  
“Connecting an audio device” on page 12.  
4
 
   
Insignia NS-CLOPP1 Digital Clock Radio with FM  
#
Item  
(volume down) button  
Description  
9
Press to decrease the volume.  
Press to increase the volume.  
10  
(volume up) button  
Back  
5V  
0.7A  
AUX  
1
2
#
Item  
Description  
1
DC IN jack  
Connect the AC/DC power adapter to this the jack. See  
“Connecting the AC/DC power adapter” on page 8.  
2
AUX jack  
Connect an audio device to this jack to play the audio from the  
device through the radio speakers. See “Connecting an audio  
device” on page 12.  
5
 
 
Insignia NS-CLOPP1 Digital Clock Radio with FM  
LCD  
6
1
2
Volume  
Preset  
AUX FM  
7
AM  
PM  
8
3
MHz  
Buzzer  
9
10  
11  
Buzzer  
4
5
SLEEP  
SNOOZE  
1 Radio  
2 Radio  
#
Icon  
Description  
1
Preset  
When you are programming a radio station preset, “Preset” and the preset number (P-01  
through P-10) appear in the center of the LCD. See “Programming a radio station preset”  
on page 12.  
When you are tuning to a radio station preset, “Preset” and the preset number (P-01  
through P-10) appear in the center of the LCD. See “Tuning to a preset radio station” on  
page 12.  
2
Volume  
After you select the alarm sound, this icon indicates that you can change the volume of the  
alarm. See “Setting the alarm sound” on page 9.  
When you are playing the radio, the “Volume” icon lights and the current volume level  
(1 through 15) appears in the center of the LCD.  
3
4
5
6
Current time  
Sleep  
Displays the current time.  
Lights when the sleep timer is active. See “Setting the sleep timer” on page 10.  
Lights when Alarm 1 has been set. See “Setting the alarm time” on page 9.  
Alarm 1  
AUX  
Lights when a connected audio device is selected as the audio source. See “Connecting an  
audio device” on page 12.  
7
8
9
FM  
Lights when the radio is selected as the audio source.  
AM/PM  
Snooze  
“AM” lights after midnight and before noon. “PM” lights after noon and before midnight.  
Lights when your radio is in snooze mode. See “Using the snooze feature” on page 10.  
Lights when no backup batteries are installed or when the backup battery charge is low.  
Lights when Alarm 2 has been set. See “Setting the alarm time” on page 9.  
10 Battery  
11 Alarm 2  
6
 
 
Insignia NS-CLOPP1 Digital Clock Radio with FM  
Package contents  
Digital clock radio with FM  
AC/DC power adapter  
Quick Setup Guide  
User Guide  
Setting up your radio  
Installing backup batteries  
The backup batteries provide power to backup the time setting when you  
unplug the AC/DC power adapter.  
Cautions  
• Use only the size and type of batteries specified.  
• Do not mix old and new batteries.  
• Make sure that you follow the correct polarity as  
indicated in the battery compartment.  
• Do not try to recharge batteries not intended to be  
recharged. They can overheat and rupture. (Follow the  
battery manufacturer’s directions.)  
• Do not throw batteries into a fire. Dispose of used  
batteries as hazardous waste.  
Note  
If you unplug the AC/DC power adapter and the backup batteries  
are dead or not installed, the time setting is lost.  
To install batteries:  
1
Push the latch to release the battery compartment cover on the  
bottom of your radio, then lift the cover off the battery compartment.  
1
AAA  
2
AAA  
2
Insert two AAA batteries (not included) into the battery compartment.  
Make sure that the + and – symbols on the batteries align with the +  
and – symbols inside the compartment.  
7
 
     
Insignia NS-CLOPP1 Digital Clock Radio with FM  
3
Insert the tab on the battery compartment cover into the slot on the  
battery compartment, then press the cover down until it clicks into  
place.  
Connecting the AC/DC power adapter  
Note  
If you unplug the AC/DC power adapter and the backup batteries  
are dead or not installed, the time setting is lost.  
To connect the AC/DC power adapter:  
1
Plug the small connector on the power adapter into the DC IN jack on  
the back of your radio.  
2
Plug the other connector on the power adapter into a power outlet.  
Using your radio  
Setting the time  
Notes  
“AM” or “PM” appears on the LCD to the right of the time. When  
you set the time, make sure that the “AM” or “PM” displays  
correctly.  
To set the time:  
1
Press Sleep  
the LCD.  
for about two seconds until the hour digits blink on  
to increase the hour or press or to decrease the  
2
Press  
hour.  
or  
3
4
Press Sleep  
again. The minutes digits blink on the LCD.  
to increase the minutes or press or to decrease  
Press  
or  
the minutes.  
5
Press Sleep  
again or wait 10 seconds to save the time setting and  
exit time setting mode.  
8
 
     
Insignia NS-CLOPP1 Digital Clock Radio with FM  
Setting the alarm sound  
Your radio has two alarms and can play the buzzer or the radio for the  
alarm sound. You can use the same alarm sound for both alarms or set one  
alarm to use the buzzer and the other alarm to use the radio.  
Note  
Button presses must be within three seconds of each other. If  
you do not press a button within three seconds, your radio exits  
alarm setting mode.  
To set the alarm sound:  
1
2
1
2
1
Press  
the LCD.  
(Alarm 1) or  
(Alarm 2). The  
or  
icon blinks on  
1
2
2
To use the radio as the alarm sound, press  
(Alarm 1) or  
(Alarm 2)  
1Radio  
2Radio  
once. The  
or  
icon blinks on the LCD and the alarm sound  
is set to the radio. Wait three seconds to save the setting and exit alarm  
sound setting mode. When the alarm turns on, the last tuned radio  
station plays.  
OR  
1
To use the buzzer as the alarm sound, press  
(Alarm 1) or  
Buzzer  
1
Buzzer  
2
2
(Alarm 2) twice. The  
or  
icon blinks on the LCD and  
the alarm sound is set to the buzzer. Wait three seconds to save the  
setting and exit alarm sound setting mode.  
1
2
3
To completely turn off the alarm, press  
(Alarm 1) or  
(Alarm 2)  
1
2
repeatedly until the  
or  
icon disappears from the LCD.  
Setting the alarm time  
Your radio has two alarms that you can set for different times.  
Notes  
• “AM” or “PM” appears on the LCD to the right of the time.  
When you set the time, make sure that the “AM” or “PM”  
displays correctly.  
• Button presses must be within 10 seconds of each other.  
If you do not press a button within 10 seconds, your radio  
exits alarm setting mode.  
To set the alarm time:  
1
2
1
2
3
Press and hold  
(Alarm 1) or  
(Alarm 2) for about two seconds  
until the hour digits blink on the LCD.  
Press  
hour.  
or  
to increase the hour or press  
or  
to decrease the  
1
2
Press  
(Alarm 1) or  
(Alarm 2) again. The minutes digits blink on  
the LCD.  
9
 
   
Insignia NS-CLOPP1 Digital Clock Radio with FM  
4
5
6
Press  
or  
to increase the minutes or press  
or  
to decrease  
the minutes.  
1
2
Press  
(Alarm 1) or  
(Alarm 2) again. The Volume icon appears on  
the LCD and the volume digits blink.  
Press or to increase the alarm volume or press  
decrease the alarm volume. The alarm volume range is from 1 to 15  
with 15 being the loudest setting. The default setting is 10.  
or  
to  
1
2
7
Press  
(Alarm 1) or  
(Alarm 2) again to save the time setting and  
exit alarm setting mode.  
Turning off the alarm  
To turn off the alarm:  
Press any button except  
SNOOZE / DIMMER  
.
Using the snooze feature  
Note  
SNOOZE / DIMMER  
You can press  
a total of six times. If you press it a  
seventh time, the alarm turns off.  
To use the snooze feature:  
When the alarm sounds, press  
minutes and SNOOZE appears on the LCD.  
SNOOZE / DIMMER  
. The alarm turns off for 10  
Setting the sleep timer  
You can specify the amount of time your radio waits before it turns off  
automatically.  
To set the sleep timer:  
Press Sleep  
repeatedly to select the amount of time you want  
your radio to wait before it turns off automatically. You can select 15,  
30, 45, 60, or 90 minutes. The time you select and the SLEEP icon  
appear on the LCD.  
To turn off the sleep timer, press Sleep  
appears and the SLEEP icon disappears.  
repeatedly until 00  
10  
 
     
Insignia NS-CLOPP1 Digital Clock Radio with FM  
Adjusting the LCD brightness  
When you adjust the LCD brightness, your radio retains the setting and  
uses this setting the next time you turn on your radio.  
To adjust the LCD brightness:  
SNOOZE / DIMMER  
1
Quickly press  
repeatedly to select a brightness level. You can  
select High, Middle, or Low.  
2
Wait a few seconds to save your setting and exit brightness mode.  
Playing your radio  
Notes  
When you turn off your radio, it goes into standby mode.  
To play your radio:  
1
Make sure that you have connected the AC/DC power adapter. See  
“Connecting the AC/DC power adapter” on page 8.  
2
3
Press Source . Your radio turns on.  
Press  
OR  
or  
to manually select a radio frequency.  
Press and hold  
or  
to automatically tune to the next lower or  
higher radio station.  
4
5
Press or to increase or decrease the volume.  
To turn off your radio, press and hold Source  
for two seconds.  
OFF appears on the LCD for three seconds, then your radio turns off.  
11  
 
   
Insignia NS-CLOPP1 Digital Clock Radio with FM  
Programming a radio station preset  
A radio station preset lets you assign a preset number to a radio station to  
make it easier to tune to a station. You can program 10 presets.  
To program a radio station preset:  
1
Tune to the radio station you want to program, then press and hold  
Preset for two seconds. The “Preset” icon lights and the next  
available preset number (P-01 through P-10) appears in the center of  
the LCD.  
2
3
If you want to use a different preset number, press  
until the number you want appears on the LCD.  
or  
repeatedly  
Within 10 seconds, press Preset  
If you do not press Preset within 10 seconds, your radio exits  
preset mode and your station preset is not saved.  
again to save your station preset.  
Tuning to a preset radio station  
After you program radio station presets, you can quickly tune to a preset  
station.  
To tune to a preset radio station:  
Quickly press and release Preset  
preset number for the station you want appear in the center of the  
LCD. Your radio tunes to the station.  
one or more times until the  
Connecting an audio device  
You can connect an audio device, such as an MP3 player, to your radio to  
play music through your radio’s speakers.  
To connect an audio device:  
1
Plug an audio cable with a 3.5 mm connector (not included) into the  
AUX IN jack on the back of your radio and into the audio out jack on  
your audio device.  
2
Press Source  
to turn on your radio, then press Source  
repeatedly until AUX appears on the LCD.  
3
4
Press or to increase or decrease the device volume.  
Use the controls on the audio device to control playback.  
12  
 
     
Insignia NS-CLOPP1 Digital Clock Radio with FM  
Specifications  
Total RMS power  
Total peak power  
Signal-to-noise ratio  
Frequency response  
Speakers  
2 W @1kHz, @ 10% THD  
4 W  
65dB  
300Hz - 20kHz  
2 × 40 mm  
Batteries  
2 AAA  
Dimensions (W × D × H)  
Weight  
9.8 × 2.1 × 2.1 in. (250 × 54 × 54 mm)  
1.1 lbs. (0.5 kg)  
Legal notices  
FCC Statement  
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two  
conditions: (1) this device may not cause harmful interference, and (2) this device must  
accept any interference received, including interference that may cause undesired  
operation.  
This equipment has been tested and found to comply with the limits for a Class B digital  
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable  
protection against harmful interference in a residential installation. This equipment  
generates, uses and can radiate radio frequency energy and, if not installed and used in  
accordance with the instructions, may cause harmful interference to radio communications.  
However, there is no guarantee that interference will not occur in a particular installation. If  
this equipment does cause harmful interference to radio or television reception, which can  
be determined by turning the equipment off and on, the user is encouraged to try to correct  
the interference by one or more of the following measure:  
Reorient or relocate the receiving antenna  
Increase the separation between the equipment and receiver.  
Connect the equipment into an outlet on a circuit different from that to which the  
receiver is connected.  
Consult the dealer or an experienced radio/TV technician for help  
Warning: Changes or modifications not expressly approved by the party responsible for  
compliance could void the user's authority to operate the equipment.  
IC Statement  
This device complies with Industry Canada licence-exempt RSS standard(s).  
Operation is subject to the following two conditions: (1) this device may not cause  
interference, and (2) this device must accept any interference, including interference that  
may cause undesired operation of the device.  
This equipment complies with IC radiation exposure limits set forth for an uncontrolled  
environment.  
Canada ICES-003 statement  
This Class B digital apparatus complies with Canadian ICES-003.  
13  
 
   
Insignia NS-CLOPP1 Digital Clock Radio with FM  
90-day limited warranty - Insignia  
Definitions:  
Insignia Products (“Insignia”) warrants to you, the original purchaser of this new  
Insignia-branded product (“Product”), that the Product shall be free of defects in the original  
manufacturer of the material or workmanship for a period of ninety (90) days from the date  
of your purchase of the Product (“Warranty Period”). For this warranty to apply, your Product  
must be purchased in the United States or Canada from a Best Buy or Future Shop  
authorized dealer of Insignia brand products only that are packaged with this warranty  
statement.  
How long does the coverage last?  
The Warranty Period lasts for ninety (90) days from the date you purchased the Product. Your  
purchase date is printed on the receipt you received with the Product.  
What does this warranty cover?  
During the Warranty Period, if the original manufacture of the material or workmanship of  
the Product is determined to be defective by an authorized Insignia repair center or store  
personnel, Insignia will (at its sole option): (1) repair the Product with new or rebuilt parts; or  
(2) replace the Product at no charge with new or rebuilt comparable products or parts.  
Products and parts replaced under this warranty become the property of Insignia and are  
not returned to you. If service of Products or parts are required after the Warranty Period  
expires, you must pay all labor and parts charges. This warranty lasts as long as you own your  
Insignia Product during the Warranty Period. Warranty coverage terminates if you sell or  
otherwise transfer the Product.  
How to obtain warranty service?  
If you purchased the Product at a Best Buy or Future Shop retail store location, please take  
your original receipt and the Product to any Best Buy or Future Shop store. Make sure that  
you place the Product in its original packaging or packaging that provides the same amount  
of protection as the original packaging. If you purchased the Product from a Best Buy or  
Future Shop online web site, mail your original receipt and the Product to the address listed  
on the web site. Make sure that you put the Product in its original packaging or packaging  
that provides the same amount of protection as the original packaging.  
To obtain warranty service, in the United States call 1-888-BESTBUY, Canada call  
1-866-BESTBUY for Future Shop call 1-800-663-2275. Call agents may diagnose and correct  
the issue over the phone.  
Where is the warranty valid?  
This warranty is valid only in the United States and Canada at Best Buy or Future Shop  
branded retail stores or websites to the original purchaser of the product in the county  
where the original purchase was made.  
What does the warranty not cover?  
This warranty does not cover:  
Customer instruction/education  
Installation  
Set up adjustments  
Cosmetic damage  
Damage due to acts of God, such as power surges  
Accident(s)  
Misuse  
14  
 
 
Insignia NS-CLOPP1 Digital Clock Radio with FM  
Abuse  
Negligence  
Commercial purposes/use, including but not limited to use in a place of business or in  
communal areas of a multiple dwelling condominium or apartment complex, or  
otherwise used in a place of other than a private home.  
Modification of any part of the Product, including the antenna  
Display panel damaged by static (non-moving) images applied for lengthy periods  
(burn-in).  
Damage due to incorrect operation or maintenance  
Connection to an incorrect voltage or power supply  
Attempted repair by any person not authorized by Insignia to service the Product  
Products sold “as is” or “with all faults”  
Consumables, including but not limited to batteries (i.e. AA, AAA, C etc.)  
Products where the factory applied serial number has been altered or removed  
Loss or Theft of this product or any part of the product  
Up to three (3) pixel failures (dots that are dark or incorrectly illuminated) grouped in an  
area smaller than one tenth (1/10) of the display size or up to five (5) pixel failures  
throughout the display. (Pixel based displays may contain a limited number of pixels  
that may not function normally.)  
Failures or Damage caused by any contact including but not limited to liquids, gels or  
pastes.  
REPAIR REPLACEMENT AS PROVIDED UNDER THIS WARRANTY IS YOUR EXCLUSIVE REMEDY  
FOR BREACH OF WARRANTY. INSIGNIA SHALL NOT BE LIABLE FOR ANY INCIDENTAL OR  
CONSEQUENTIAL DAMAGES FOR THE BREACH OF ANY EXPRESS OR IMPLIED WARRANTY ON  
THIS PRODUCT, INCLUDING, BUT NOT LIMITED TO, LOST DATA, LOSS OF USE OF YOUR  
PRODUCT, LOST BUSINESS OR LOST PROFITS. INSIGNIA PRODUCTS MAKES NO OTHER  
EXPRESS WARRANTIES WITH RESPECT TO THE PRODUCT, ALL EXPRESS AND IMPLIED  
WARRANTIES FOR THE PRODUCT, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED  
WARRANTIES OF AND CONDITIONS OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR  
PURPOSE, ARE LIMITED IN DURATION TO THE WARRANTY PERIOD SET FORTH ABOVE AND  
NO WARRANTIES, WHETHER EXPRESS OR IMPLIED, WILL APPLY AFTER THE WARRANTY  
PERIOD. SOME STATES, PROVINCES AND JURISDICTIONS DO NOT ALLOW LIMITATIONS ON  
HOW LONG AN IMPLIED WARRANTY LASTS, SO THE ABOVE LIMITATION MAY NOT APPLY TO  
YOU. THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY ALSO HAVE OTHER  
RIGHTS, WHICH VARY FROM STATE TO STATE OR PROVINCE TO PROVINCE.  
Contact Insignia:  
For customer service please call 1-877-467-4289  
Distributed by Best Buy Purchasing, LLC  
7601 Penn Avenue South, Richfield, Minnesota, U.S.A. 55423-3645  
© 2013 BBY Solutions, Inc.  
All rights reserved. INSIGNIA is a trademark of BBY Solutions, Inc. Registered in some  
countries. All other products and brand names are trademarks of their respective owners.  
15  
 
INSIGNIA is a registered trademark of BBY Solutions, Inc.  
Registered in some countries.  
Distributed by Best Buy Purchasing, LLC, 7601 Penn Ave South, Richfield, MN 55423 U.S.A.  
©2013 BBY Solutions, Inc.  
All Rights Reserved  
1-877-467-4289  
V3 ENGLISH  
13-0144  
 

InFocus Projector in2100 User Manual
Intellinet Network Solutions Network Card 503839 User Manual
Intel Server ISP1100 User Manual
ION Turntable VERTICAL VINYL User Manual
JVC Computer Monitor DT V17L3DY User Manual
JVC Stereo System CA MXJ150R User Manual
Kenmore Freezer 183134013 User Manual
Kenwood Stereo System VR 9070 User Manual
King Canada Drill KC 117C FC User Manual
Krell Industries CD Player KAV 250cd 2 User Manual