Quick Setup Guide
4" High Velocity Personal Fan NS-FANT4-B/NS-FANT4-P
|
Using your fan
Important safety instructions
Package contents
1 Set your fan on a dry and level surface.
2 Plug in the fan.
READ AND SAVE THESE IMPORTANT INSTRUCTIONS
• 4" high velocity personal fan
1
2
Use your fan only as described in this Quick Setup Guide.
Do not use your fan if it works intermittently, stops working entirely, or
parts are missing or damaged.
3 Adjust the fan to the angle that you want.
4 Turn the control knob to ON.
• Quick Setup Guide
3
4
To reduce the risk of fire or electrical shock, DO NOT use this fan with
any solid-state speed control devices (such as a dimmer switch) or
expose it to water.
To help prevent electrical shock, do not immerse your fan, plug, or
power cord in water or spray it with liquids.
Close supervision is needed when your fan is being used near children.
Unplug your fan before moving, cleaning, and when it is not in use.
Never insert fingers or other objects through the grill while the fan is
running.
Features
Care and maintenance
• Saves energy
• Turn the control knob to OFF and unplug your fan before cleaning.
• Use a soft, damp cloth to clean your fan.
• Whisper quiet motor
• Adjustable tilt angle head
• All metal construction
• Do not immerse your fan or allow water to drip into the motor housing.
• Do not use gasoline, paint thinner, or other chemicals to clean your fan.
• Store your fan in its original box or cover it to protect it from dust.
• Store your fan in a cool, dry place.
5
6
7
8
9
Make sure your fan is on a stable surface during use to avoid it
overturning.
Do not use your fan in an open window. Rain may cause an electrical
hazard.
Replacing the fuse
If your fan stops working, you may need to replace
the fuse.
10 Do not use your fan near explosive or flammable fumes.
11 Do not place your fan or its parts near an open flame, stove, or other
heating appliances.
12 Do not use your fan if the cord or plug is damaged. Throw your fan
away or return it to an authorized service facility for examination and/or
repair.
13 Do not use your fan after a malfunction, drop, or if it is is damaged in
any way.
14 To unplug, pull the plug from the power outlet. Never yank on the
power cord.
Warning: Risk of fire. Replace only with a 5 Amp, 125 Volt
fuse.
OPEN
1 Unplug your fan.
2 Slide the fuse cover towards the blades until
you can see the entire fuse.
3 Carefully pry out the old fuse.
4 Push the new fuse into the compartment, then
slide the fuse cover closed. Your fan is ready for
normal use.
15 Always use your fan on a dry surface.
16 This fan is intended for household use only. Do not use it for commer-
cial or industrial use.
Before using your new product, please read these instructions to prevent any damage.
CLOSE
|