JVC Blu ray Player LT 42B300 User Manual

LCD/Blu-ray Disc Combo TV Software Update Procedure  
This document describes the procedure to update the software for LCD/Blu-ray Disc Combo TV:  
LT-42B300  
Tools Required  
In preparing for the software update, you must meet the following requirements:  
• Access to a PC capable of extracting ZIP archive files  
• Access to a PC capable of writing one of the following formats DVD-RW / DVD-R / CD-RW / CD-R (Only for  
-
Blu ray Player's Software Updating)  
For Blu-ray Player's Software Update  
Step 1 Check the Blu-ray Player's Current Software Version  
1. Turn on the unit  
2. Press [SETUP] to display the main menu  
3. Use [Cursor K/L] to select “BLU-RAY”, then press [ENTER]  
4. Use [Cursor K/L] to select “  
5. Use [Cursor K/L] to select “  
”, then press [ENTER]  
”, then press [ENTER]  
6. Use [Cursor K/L] to select “Software Upgrade”, then press [ENTER]  
7. Use [Cursor K/L] to select “Current Version”, then press [ENTER]  
The Blu-ray Player's current software version will be shown on your TV screen  
Others  
Current Version  
1.007  
Current Version  
The current version of the BD Loader  
software is shown above.  
Step 2 Download the Latest Software for Blu-ray Player  
1. Visit firmware.jvc.com  
2. Download the update software for the Blu-ray Player  
3. Save the downloaded file to you desktop  
Step 3 Unzip and Burn the Contents  
Once you have downloaded the correct software for your LCD/Blu-ray combo TV, extract the ZIP file and burn it to a disc  
Note: This procedure will vary depending on the operating system and software you are using  
Please refer to the software manufacturer’s instructions  
Step 4 Install the Software Update for the Blu-ray Player  
Once you have created a software update disc, follow the procedure below to update the software on the unit  
Note: Only Blu-ray settings will be reset to default during update process  
1. Turn on the unit  
2. Press [SETUP] to display the main menu  
3. Use [Cursor K/L] to select “BLU-RAY”, then press [ENTER]  
4. Use [Cursor K/L] to select “  
5. Use [Cursor K/L] to select “  
”, then press [ENTER]  
”, then press [ENTER]  
6. Use [Cursor K/L] to select “Software Upgrade”, then press [ENTER]  
7. Use [Cursor K/L] to select “Disc Upgrade”, then press [ENTER]  
8. Use [Cursor K/L] to select “Yes”, then press [ENTER]  
 
12. After the software update has completed successfully,the "Finish" message will be shown at the bottom right  
of the TV screen  
Software Upgrade  
2.Upgrading  
1.Loading  
Upgrading Software...  
Please wait a moment. Do NOT turn off  
the unit during the software upgrade.  
Once the upgrade is completed,  
press 'POWER' to turn off the unit.  
Finish  
13. Turn off the LCD/Blu-ray Combo TV and wait 30 seconds  
14. Turn on the LCD/Blu-ray Combo TV. The software update disc will be ejected automatically  
The Blu-ray Player's software update is now complete  
 

Jumpking Fitness Equipment OR1213 User Manual
JVC VCR HR A53U User Manual
Kalorik Sander PPG 36584 User Manual
Kenwood Satellite Radio T 599 User Manual
King Canada Air Compressor 8469 User Manual
KitchenAid Ice Maker KUIC15NLT User Manual
KitchenAid Oven KGSS907SBL02 User Manual
Kompernass Hair Dryer KH1803 User Manual
Kompernass Power Screwdriver PAS 2V User Manual
Konica Minolta Printer Printer Copier User Manual