JVC CRT Television AV 14145 User Manual

COLOUR TELEVISION  
Contents  
Knowing your TV’s features  
AV-14145  
AV-14148  
...........................  
2
.
Remote control buttons and basic functions 3  
..............................  
TV buttons and functions  
5
6
........................................  
Setting up your TV  
.................................  
Basic setting for picture  
Advanced setting for picture  
8
..........................  
9
..................................  
Basic setting for sound  
9
.........................  
Advanced setting for sound  
10  
10  
11  
12  
14  
14  
15  
..............  
Favorite channel and video setting  
......................................  
Customized setting  
TV channel presetting  
Additional preparation  
.................................  
.................................  
...........................................  
Troubleshooting  
..............................................  
Specifications  
INSTRUCTIONS  
GGT0033-001A-H  
 
Remote control buttons and basic functions  
1
6
9
0
8
2
3
7
4
5
RM-C1261  
No.Press  
To  
Turn on or off the TV from standby mode.  
Display menu and confirm selected function.  
Select and adjust menu function.  
Select the desired channel number.  
1
2
3
4
5
6
7
8
POWER  
MENU/OK  
5//2/3  
CHANNEL M  
VOLUME M  
TV/VIDEO  
MUTING  
Adjust the volume level.  
Select TV or VIDEO terminal input.  
Turn off the volume. Press this button again to resume the volume.  
Display the programme number or video terminal number and PR list (channel  
list) on the screen. You can select the channel using the PR list.  
1 Press the DISPLAY button once to display the PR list.  
2 Press 5//2/3 button to choose a channel, then press the MENU/OK button.  
You can confirm the favorite channels in the PR list. The channels set to favorite  
channels are indicated with coloured mark.  
DISPLAY  
/BACK  
On the other hand, you can use this button to return to the previous menu.  
9
0
0~9, -/--  
Select the programme number. For two digits programme number, press -/--,  
then press the number button.  
a) Return to the frequently view channel with one touch.  
RETURN,  
1
2
Choose the channel you want to register.  
Press and hold RETURN, button until “RETURN PLUS PROGRAMMED!”  
appears.  
To cancel, press and hold RETURN, button until “RETURN PLUS CANCELED!”  
appears.  
b) Return to the previously viewed channel, if you have not set or have  
cancelled the Return channel as above.  
3
 
Remote control buttons and basic functions  
How to operate menus and menu locations  
TO  
Operation  
Note  
Display the MENU.  
Press the MENU/OK button 2.  
To exit the MENU, press the  
DISPLAY/BACK button* 8 or  
choose EXIT menu.  
Display the top menu. Press 5/buttons 3 to choose a menu title. Press button 3 to display the  
Then press MENU/OK button 2.  
Display the 2nd menu. Press 5/buttons 3 to choose a menu title.  
Then press MENU/OK button 2.  
next page for more functions.  
Display the 3rd menu. Press 5/buttons 3 to choose a menu title.  
Then press MENU/OK button 2.  
Return to the previous Press the DISPLAY/BACK button* 8.  
menu.  
Choose the setting of Press 5/buttons 3 to choose a function.  
Press the MENU/OK button 2 to  
Then press the 2/3 buttons 3 to change the exit from the menu.  
a function.  
setting.  
Adjust the effect level Press 5/buttons 3 to choose a function.  
of a function.  
Then press the 2/3 buttons 3 to adjust the  
effect level.  
Display the sub menu Press 5/buttons 3 to choose a function.  
of a function.  
Then press MENU/OK button 2 to display  
the sub menu.  
The following chart shows locations of functions in menus.  
In this manual, location of a function is described as follows:  
MENU  
Top menu  
2nd menu  
MENU  
Top menu  
2nd menu  
3rd menu  
Note: Some functions have the 4th menus as the sub-menus.  
* To exit the menu, the on screen display will show BACK indicated in blue. But it doesn’t refer to the  
blue button on the remote control. Instead, it refers to the DISPLAY/BACK button on the remote control.  
Top menu  
2nd menu  
Location 3rd menu  
Location  
MENU  
INPUT  
EXT. INPUT  
P.11  
P.11  
P.8  
P.8  
P.8  
-
-
-
DISPLAY  
-
-
PICTURE  
* If you want to  
adjust  
PICTURE  
SETTING  
PICTURE MODE  
PICTURE SETTING  
WHITE BALANCE  
PICTURE FEATURES  
-
-
-
-
-
-
VNR  
P.11  
menu, you must  
set PICTURE  
MODE menu to  
USER.  
FAVORITE CH SETTING  
P.10  
VIDEO SETTING  
P.10  
COLOUR SYSTEM  
P.8  
SOUND  
AI VOLUME  
OFF TIMER  
CHILD LOCK  
AUTO PROGRAM  
EDIT/MANUAL  
LANGUAGE  
BLUE BACK  
AUTO SHUTOFF  
-
P.9  
-
-
-
-
-
-
-
-
FEATURES  
P.11  
P.11  
P.12  
P.12  
P.11  
P.9  
INSTALL  
DELETE, MOVE, MANUAL, INSERT P.12  
LANGUAGE  
-
P.11  
-
P.11  
-
EXIT  
-
-
4
 
TV buttons and functions  
The following illustrations are for AV-14145 and AV-14148  
Front of the TV  
9
8
7
6
5
4
3 2 1  
AV-14145  
MENU  
OK  
VIDEO AUDIO  
IN (VIDEO-2)  
9
8
7
6
5
4
3 2 1  
AV-14148  
MENU  
OK  
VIDEO  
IN (VIDEO-2)  
AUDIO  
Rear of the TV  
=
-
0
No. Button/terminal  
Description  
1
I (main power)  
Press to turn on or turn off the TV’s main power.  
2
Power lamp  
Indicate the TV is being turned on or off.  
No colour : TV’s main power is being turned off.  
Red : TV’s main power is being turned on.  
Lights when the TV is in the OFF TIMER mode.  
3
4
5
6
7
8
9
0
-
=
TIMER lamp  
Remote control sensor  
VOLUME M  
CHANNELM  
MENU  
Press to adjust the volume level.  
Press to select the desired channel.  
Press to display the menu.  
Video and audio input jacks for VIDEO-2 mode.  
Headphone jack.  
Aerial socket.  
Video and audio output jacks.  
Video and audio input jacks for VIDEO-1 mode.  
IN (VIDEO-2)  
OUTPUT  
VIDEO-1 INPUT  
How to operate the menus with the TV button  
Work as same as the button on the  
remote control unit  
TV button  
Note  
MENU  
MENU/OK button  
To display main menu and exit  
menu after finish setting.  
CHANNEL M  
VOLUME M  
/5 button  
2/3 button  
To select menu function.  
To adjust the desired function.  
5
 
Setting up your TV  
CAUTION  
Turn off the equipment including the TV before connecting.  
1 Connecting the aerial  
To install rod aerial  
Install into the top-rear aerial holder. Once installed, it cannot be removed.  
indoor aerial  
Rod aerial  
VHF/UHF outdoor aerial  
Aerial holder  
Rear of the TV  
If you connect a VCR, connect the aerial output jack of your VCR and the aerial jack on the TV  
with the aerial cable. Then connect the output jacks of your VCR and the VIDEO-1 input jacks of  
the TV with the video cable and audio cables. For details, see the manual of your VCR.  
VHF/UHF outdoor aerial  
3 Inserting batteries into the remote  
control.  
Insert two batteries by following the ª and  
· polarities and inserting the · end first.  
Rear of the TV  
CAUTION:  
Follow the cautions printed on the batteries.  
Notes:  
• Use AA/R6/UM-3 dry cell batteries.  
• If the remote control does not work  
properly, fit new batteries. The supplied  
batteries are for testing, not regular use.  
To audio/video  
To RF  
output  
output  
To aerial input  
VCR  
The illustration shown is just a sample. It may  
not be same as your TV.  
2 Connecting the compatible main plug  
to the AC outlet.  
4 Turn on the TV by pressing the main  
power button.  
JVC logo appears on the screen.  
6
 
Setting up your TV (continued)  
5 Making the initial settings  
Set up your TV by pressing MENU/OK button or waiting for 15 seconds, then operate the TV by  
following the steps as below :  
êìëëäàâ  
7
• Press 5/button to select your desired  
• Press the red button to cancel the SETUP  
TOUR RESTART function.  
language.  
If you want to make initial settings again  
when the next time you turn on the TV,  
press the MENU/OK button to activate the  
SETUP TOUR RESTART function.  
CH/CC  
CH 09  
CH 11  
CH 13  
EDIT  
PR  
7
8
9
3
• TV will start searching for the channels.  
10  
11  
12  
13  
To stop AUTO PROGRAM, press MENU/OK  
button.  
• Proceed to edit the channel list (PR list).  
For details, see page 12.  
• If the JVC logo does not appear, use LANGUAGE and AUTO PROGRAM functions to  
make the initial settings.  
Those functions are located in the INSTALL menu.  
• If the JVC logo appears, although you had made the initial settings, press the TV/VIDEO  
button to exit from initial settings.  
7
 
Basic setting for picture  
To operate this function with a menu:  
COLOUR SYSTEM  
You can select the appropriate colour system  
when the picture is not clear or no colour  
appears.  
MENU  
PICTURE  
PICTURE MODE  
To return the USER setting to the default, press  
the blue button when the PICTURE SETTING  
menu appears.  
Press the COLOUR SYSTEM button to select a  
setting.  
In TV mode:  
Adjusting the picture - USER  
AUTO  
PAL  
SECAM  
You can adjust the desired picture setting when  
selecting USER in PICTURE MODE.  
In VIDEO mode:  
1 Select the USER in PICTURE MODE under  
PICTURE menu.  
MENU  
USER  
PICTURE  
PICTURE MODE  
To operate this function with a menu:  
MENU PICTURE PICTURE FEATURES  
COLOUR SYSTEM  
2 Select the PICTURE SETTING in PICTURE  
menu, then adjust the setting.  
For the colour system in each country or region,  
see the table below:  
MENU  
PICTURE  
PICTURE SETTING  
Area  
Country or Region  
System  
CONTRAST  
2 : Lower contrast  
3 : Higher contrast  
Bahrain, Kuwait, Oman, Qatar,  
United Arab Emirates, Yemen, etc.  
Indonesia, Malaysia, Singapore,  
BRIGHT  
SHARP  
COLOUR  
TINT*  
2 : Darker  
2 : Softer  
2 : Lighter  
2 : Reddish  
3 : Brighter  
3 : Higher  
3 : Deeper  
3 : Greenish  
PAL  
Asia, Middle Thailand, India, etc.  
East  
China, Vietnam, etc.  
Hong Kong, etc.  
PAL  
PAL  
*TINT can only be adjusted in NTSC system.  
Islamic Republic of Iran, Lebanon,  
Saudi Arabia, etc.  
SECAM  
WHITE BALANCE  
Philippines, Taiwan, Myanmar, etc. NTSC  
Russia, etc.  
SECAM  
PAL  
PAL  
You can change the white balance of the picture  
to better match the type of video being viewed.  
Select the WHITE BALANCE in the PICTURE  
menu, then choose the desired setting.  
Czech Republic, Poland, etc.  
Germany, Holland, Belgium, etc.  
UK, etc.  
Europe  
PAL  
Oceania  
Africa  
Australia, New Zealand, etc.  
Republic of South Africa, etc.  
Nigeria, etc.  
PAL  
PAL  
PAL  
MENU  
PICTURE  
WHITE BALANCE  
NORMAL  
COOL  
Normal white balance.  
Bluish white.  
Egypt, Morocco, etc.  
SECAM  
WARM  
Reddish white.  
PICTURE MODE  
You can choose the desired picture setting with  
one-touch.  
Press the PICTURE MODE button to select a  
setting.  
SOFT  
Softens contrast and sharpness.  
Heightens contrast and sharpness.  
Standard picture setting.  
You can change this picture setting  
as you like.  
BRIGHT  
STANDARD  
USER  
Select USER and adjust following  
items in the PICTURE SETTING menu.  
(CONTRAST, BRIGHT, SHARP, COLOUR,  
About the basic operations of the menu,  
please see the “How to operate menus  
and menus locations” on page 4.  
TINT*)  
*TINT can only be adjusted in NTSC system.  
8
 
Advance setting for picture  
MENU  
INSTALL  
BLUE BACK  
BLUE BACK  
If you wish to continue viewing the poor picture,  
cancel the BLUE BACK function.  
You can set the TV to automatically change to a  
blue screen and mute the sound if the signal is  
weak or absent, or when there is no input from  
an antenna.  
Select the BLUE BACK in the INSTALL menu,  
then choose ON or OFF.  
Basic setting for sound  
SOUND SYSTEM  
You can select an appropriate sound system when  
abnormal sound occurs even when the picture  
appears normally.  
Press the SOUND SYSTEM button to select a  
setting.  
B/G  
I
D/K  
The function is not available in video mode.  
For the sound system in each country or region,  
see the table below:  
Area  
Country or Region  
System  
Bahrain, Kuwait, Oman, Qatar,  
United Arab Emirates, Yemen, etc. B/G  
Indonesia, Malaysia, Singapore,  
Asia, Middle Thailand, India, etc.  
East  
China, Vietnam, etc.  
Hong Kong, etc.  
D/K  
I
Islamic Republic of Iran, Lebanon,  
Saudi Arabia, etc.  
B/G  
Philippines, Taiwan, Myanmar, etc.  
Russia, etc.  
Czech Republic, Poland, etc.  
Germany, Holland, Belgium, etc.  
UK, etc.  
M
D/K  
D/K  
B/G  
I
Europe  
Oceania  
Africa  
Australia, New Zealand, etc.  
Republic of South Africa, etc.  
Nigeria, etc.  
B/G  
I
B/G  
B/G  
Egypt, Morocco, etc.  
Advanced setting for sound  
AI VOLUME  
You can adjust the volume of all the channels  
and video inputs to the same level automatically.  
Select the AI VOLUME in SOUND menu, then  
choose ON or OFF.  
About the basic operations of the menu,  
please see the “How to operate menus  
and menus locations” on page 4.  
MENU  
SOUND  
AI VOLUME  
9
 
Favorite channel and video setting  
To register the favorite channel  
You can register and recall 4 favorite channels by  
using the colour buttons (red, green, yellow,  
blue).  
To adjust the video setting  
(VIDEO SETTING)  
You can adjust the picture settings for video  
inputs.  
1 In TV mode, select a TV channel (PR01- 99)  
1 Display the PICTURE menu and select  
VIDEO SETTING in PICTURE FEATURES  
menu.  
you desired to register.  
2 Press and hold a colour button for 3  
seconds or more.  
“FAVORITE CHANNEL 7 PROGRAMMED!”  
appears on the screen and current channel  
is registered.  
MENU  
PICTURE  
PICTURE FEATURES  
VIDEO SETTING  
2 Select VIDEO STATUS in VIDEO SETTING  
menu, then choose the desired video  
input.  
3 To register other favorite channels, repeat  
Step 1 to 2.  
VIDEO STATUS  
VIDEO SETTING  
To recall the favorite channel, press the colour  
button.  
VIDEO SETTING  
When the TV is in menu mode, favorite channel  
function is not available.  
VIDEO STATUS  
CONTRAST  
BRIGHT  
VIDEO-1  
SHARP  
COLOUR  
TINT  
EFFECT  
ON  
To adjust favorite channel setting  
(FAVORITE CH SETTING)  
You can adjust the picture settings for the favorite  
channels.  
3 Select EFFECT, then press 2/3 button to  
choose ON. To cancel the settings, choose  
OFF.  
1 Display the PICTURE menu and select  
FAVORITE CH SETTING in PICTURE  
FEATURES menu.  
4 Select the desired item that you wish to  
adjust.  
CONTRAST  
TINT  
BRIGHT  
COLOUR  
SHARP  
MENU  
PICTURE  
PICTURE FEATURES  
FAVORITE CH SETTING  
5 Press the MENU/OK button to exit the  
menu.  
2 Select FAVORITE CHANNEL in FAVORITE  
CH SETTING menu, then choose the  
desired favorite channel.  
FAVORITE CH SETTING  
FAVORITE CHANNEL  
FAVORITE CH SETTING  
FAVORITE CHANNEL  
CONTRAST  
BRIGHT  
SHARP  
COLOUR  
TINT  
EFFECT  
PR 01  
ON  
3 Select EFFECT, then press 2/3 button to  
choose ON.  
To cancel the settings, choose OFF.  
4 Select the desired item that you wish to  
adjust.  
CONTRAST  
TINT  
BRIGHT  
COLOUR  
SHARP  
About the basic operations of the menu,  
please see the “How to operate menus  
and menus locations” on page 4.  
5 Press the MENU/OK button to exit the  
menu.  
10  
 
Customized setting  
To operate this function with a menu:  
MENU FEATURES OFF TIMER  
VNR  
You can reduce the noise.  
When the elapsed of time left one minute,  
“GOOD NIGHT!” appears on the screen.  
You can display the OFF TIMER menu again to  
confirm or change the remaining time.  
Select the VNR in the PICTURE FEATURES menu  
under PICTURE menu, then choose a setting of  
VNR function.  
MENU  
VNR  
PICTURE  
PICTURE FEATURES  
AUTO SHUTOFF  
OFF  
VNR is turned off.  
You can set the TV to turn off automatically  
when no signal is received for about 15 minutes  
or longer after the end of a broadcast.  
Select AUTO SHUTOFF in INSTALL menu, then  
choose ON or OFF.  
AUTO  
MIN  
MAX  
Effect of VNR is automatically controlled.  
Effect of VNR becomes minimum level.  
Effect of VNR becomes maximum level.  
If you select MAX, the picture becomes softer  
even if the original picture is sharp.  
MENU  
INSTALL  
AUTO SHUTOFF  
The AUTO SHUTOFF function does not turn off  
the TV’s main power.  
The AUTO SHUTOFF function is not available in  
video mode.  
LANGUAGE  
You can choose your desired on screen display  
language.  
Select the LANGUAGE in the INSTALL menu,  
then choose a language.  
EXT. INPUT (TV/ VIDEO)  
MENU  
INSTALL  
LANGUAGE  
You can select TV or video terminal input with  
one touch.  
Press the TV/VIDEO button to select an input.  
CHILD LOCK  
You can disable the front control buttons of the  
TV.  
To operate this function with a menu:  
MENU  
INPUT  
EXT.INPUT  
Select the CHILD LOCK in the FEATURES menu,  
then choose ON or OFF.  
DISPLAY  
MENU  
FEATURES  
CHILD LOCK  
You can display the programme number, video  
terminal number and PR list on the screen.  
Press the DISPLAY button to display the informa-  
tion on screen.  
OFF TIMER  
You can set the TV to turn off automatically to  
standby mode after a set time.  
To operate this function with a menu:  
Press the OFF TIMER button to select a desired  
period of time.  
MENU  
INPUT  
DISPLAY  
OFF TIMER  
0
120  
10  
You can set the period of time to a maximum of  
120 minutes in 10 minutes step.  
About the basic operations of the menu,  
please see the “How to operate menus  
and menus locations” on page 4.  
11  
 
TV channel presetting  
5 Press the 3 button to choose an appropri-  
ate sound system.  
For details, see “SOUND SYSTEM” on  
page 9.  
To register the TV channels auto-  
matically  
You can register the TV channels into the TV’s  
channel list automatically.  
6 Press the green or red button to search for  
the TV channel.  
Searching stops when a channel is found  
and displayed.  
1 Display the INSTALL menu.  
MENU  
INSTALL  
2 Choose AUTO PROGRAM, then press the  
MENU/OK button.  
AUTO PROGRAM function starts, and the  
channels received are registered in the  
channel list (PR list) automatically.  
7 Repeat step 5 until your desired TV  
channel appears.  
If the reception Press the blue or yellow button  
is poor  
to fine tune the TV channel.  
If noisy sound  
is heard  
Press the 3 button to choose  
3 “SETUP TOUR RESTART?” appears.  
an appropriate sound system.  
To start the  
Press the MENU/OK button.  
Then proceed to step 5 of  
“Setting up your TV” on page  
7.  
8 Press the MENU/OK button to exit the  
menu.  
SETUP TOUR  
To skip the  
SETUP TOUR  
Press the Red button.  
To edit the channel list (PR LIST)  
(MOVE and DELETE in the EDIT menu)  
4 The EDIT menu appears.  
You can edit the TV channel list as you like.  
To edit the  
channel list  
Proceed to the Step 3 of “To  
edit the channel list (PR list)”  
on this page.  
Note: After this operation, other channel’s PR  
numbers will be changed.  
If a channel is  
not registered  
Proceed to the Step 3 of “To  
register the channel manually”  
on this page.  
1 Display the INSTALL menu.  
MENU  
INSTALL  
2 Choose EDIT/ MANUAL, then press the  
To exit the menu Press the MENU/OK button.  
MENU/OK button. EDIT menu appears.  
For details of “SETUP TOUR”, see page 7.  
EDIT  
PR  
7
8
CH/CC  
CH 09  
CH 11  
CH 13  
To register the TV channels manually  
(MANUAL in the EDIT menu)  
You can register the TV channels into the TV’s  
channel list manually.  
9
3
10  
11  
12  
13  
3 Choose the channel which you want to  
change PR number, or delete.  
1 Display the INSTALL menu.  
MENU  
INSTALL  
4 Do the following action:  
2 Choose EDIT/ MANUAL, then press the  
MENU/OK button. EDIT menu appears.  
To change the  
PR number  
(MOVE)  
Press the 3 button. Then move  
it to the PR number you want  
to use it for the channel.  
EDIT  
PR  
7
8
CH/CC  
CH 09  
CH 11  
CH 13  
Finally press the 2 button.  
Press the yellow button.  
To delete the  
9
3
10  
11  
12  
13  
channel (DELETE)  
5 Press the MENU/OK button to exit the  
menu.  
3 Choose the channel which you want to  
register.  
4 Press the blue button to activate the  
MANUAL function.  
The sound system of the channel appears  
at the right of the CH/CC number.  
About the basic operations of the menu,  
please see the “How to operate menus  
and menus locations” on page 4.  
12  
 
TV channel presetting  
Channel  
To add in the new channel  
(INSERT in the EDIT menu)  
You can add in the new channel in the TV  
channel list as you like.  
You need to find the “CH/CC” number for the TV  
channel. Find the “CH/CC” number correspond-  
ing to the channel number of the TV channel  
from the attached sheet “CH/CC number list” on  
this page.  
CH  
US  
CCIR OIRT AUSTRALIA  
CH  
US  
CCIR OIRT AUSTRALIA  
CH 02  
CH 03  
CH 04  
CH 05  
CH 06  
CH 07  
CH 08  
CH 09  
CH 10  
CH 11  
CH 12  
CH 13  
US- 2  
US- 3  
US- 4  
US- 5  
US- 6  
US- 7  
US- 8  
US- 9  
US- 10  
US- 11  
US- 12  
US- 13  
E2  
E3  
E4  
E5  
E6  
E7  
E8  
E9  
R1  
AU- 0  
AU- 1  
AU- 2  
AU- 6  
AU- 7  
AU- 8  
AU- 9  
CH 36 US- 36, W+ 51 E36  
CH 37 US- 37, W+ 52 E37  
CH 38 US- 38, W+ 53 E38  
CH 39 US- 39, W+ 54 E39  
CH 40 US- 40, W+ 55 E40  
CH 41 US- 41, W+ 56 E41  
CH 42 US- 42, W+ 57 E42  
CH 43 US- 43, W+ 58 E43  
CH 44 US- 44, W+ 59 E44  
CH 45 US- 45, W+ 60 E45  
CH 46 US- 46, W+ 61 E46  
CH 47 US- 47, W+ 62 E47  
CH 48 US- 48, W+ 63 E48  
CH 49 US- 49, W+ 64 E49  
CH 50 US- 50, W+ 65 E50  
CH 51 US- 51, W+ 66 E51  
CH 52 US- 52, W+ 67 E52  
CH 53 US- 53, W+ 68 E53  
CH 54 US- 54, W+ 69 E54  
CH 55 US- 55, W+ 70 E55  
CH 56 US- 56, W+ 71 E56  
CH 57 US- 57, W+ 72 E57  
CH 58 US- 58, W+ 73 E58  
CH 59 US- 59, W+ 74 E59  
CH 60 US- 60, W+ 75 E60  
CH 61 US- 61, W+ 76 E61  
CH 62 US- 62, W+ 77 E62  
CH 63 US- 63, W+ 78 E63  
CH 64 US- 64, W+ 79 E64  
CH 65 US- 65, W+ 80 E65  
CH 66 US- 66, W+ 81 E66  
CH 67 US- 67, W+ 82 E67  
CH 68 US- 68, W+ 83 E68  
CH 69 US- 69, W+ 84 E69  
R2  
R6  
R7  
R8  
R9  
E10 R10  
E11 R11  
E12 R12  
AU- 10  
AU- 11  
CH 14 US- 14, W+ 29  
CH 15 US- 15, W+ 30  
CH 16 US- 16, W+ 31  
CH 17 US- 17, W+ 32  
CH 18 US- 18, W+ 33  
CH 19 US- 19, W+ 34  
CH 20 US- 20, W+ 35  
CH 21 US- 21, W+ 36 E21  
CH 22 US- 22, W+ 37 E22  
CH 23 US- 23, W+ 38 E23  
CH 24 US- 24, W+ 39 E24  
CH 25 US- 25, W+ 40 E25  
CH 26 US- 26, W+ 41 E26  
CH 27 US- 27, W+ 42 E27  
CH 28 US- 28, W+ 43 E28  
CH 29 US- 29, W+ 44 E29  
CH 30 US- 30, W+ 45 E30  
CH 31 US- 31, W+ 46 E31  
CH 32 US- 32, W+ 47 E32  
CH 33 US- 33, W+ 48 E33  
CH 34 US- 34, W+ 49 E34  
CH 35 US- 35, W+ 50 E35  
1 Display the INSTALL menu.  
MENU  
INSTALL  
2 Choose EDIT/ MANUAL, then press the  
MENU/OK button. EDIT menu appears.  
3 Choose the PR number for which you will  
register a new TV channel.  
4 Press the green button, then press 5/∞  
buttons to choose “CC” or “CH”.  
5 Press the number button to enter the  
remaining CH/CC number.  
The TV starts to search the TV channel,  
and the picture of the TV channel appears.  
If the TV finds no TV channel, a noisy  
picture appears.  
CC  
US  
CCIR OIRT AUSTRALIA  
CC  
US  
W+ 2  
W+ 3  
W+ 4  
W+ 5  
W+ 6  
W+ 7  
W+ 8  
CCIR OIRT AUSTRALIA  
When a TV channel has already been registered  
in PR99, using the INSERT function deletes that  
TV channel.  
CC 01  
CC 02  
CC 03  
CC 04  
CC 05  
CC 06  
CC 07  
CC 08  
CC 09  
CC 10  
CC 11  
CC 12  
CC 13  
CC 14  
CC 15  
CC 16  
CC 17  
CC 18  
CC 19  
CC 20  
CC 21  
CC 22  
CC 23  
CC 24  
CC 25  
CC 26  
CC 27  
CC 28  
CC 29  
CC 30  
CC 31  
CC 32  
CC 33  
CC 34  
CC 35  
CC 36  
CC 37  
S- 1  
S- 2  
AU- 5  
CC 38  
CC 39  
CC 40  
CC 41  
CC42  
CC 43  
CC 44  
CC 45  
CC 46  
CC 47  
CC 48  
CC 49  
CC 50  
CC 51  
CC 52  
CC 53  
CC 54  
CC 55  
CC 56  
CC 57  
CC 58  
CC 59  
CC 60  
CC 61  
CC 62  
CC 63  
CC 64  
CC 75  
CC 76  
CC 77  
C 78  
S- 38  
S- 39  
S- 40  
S- 41  
S- 3  
S- 4  
S- 5  
S- 6  
AU- 5A  
About the basic operations of the menu,  
please see the “How to operate menus  
and menus locations” on page 4.  
S- 7  
S- 8  
S- 9  
W+ 9  
W+ 10  
W+ 11  
W+ 12  
W+ 13  
W+ 14  
W+ 15  
W+ 16  
W+ 17  
W+ 18  
W+ 19  
W+ 20  
W+ 21  
W+ 22  
W+ 23  
W+ 24  
W+ 25  
W+ 26  
W+ 27  
W+ 28  
S- 10  
S- 11  
S- 12  
S- 13  
S- 14  
S- 15  
S- 16  
S- 17  
S- 18  
S- 19  
S- 20  
S- 21  
S- 22  
S- 23  
S- 24  
S- 25  
S- 26  
S- 27  
S- 28  
S- 29  
S- 30  
S- 31  
S- 32  
S- 33  
S- 34  
S- 35  
S- 36  
S- 37  
CH/CC number  
A
B
C
D
E
F
G
H
I
J
K
When you want to use the INSERT function by  
the previous operation, find the CH/CC number  
corresponding to the channel number of the TV  
channel from this table.  
Channel No. Country  
US  
CCIR  
OIRT  
United States, Philippines, etc..  
Middle East, Southeast Asia, etc..  
Eastern Europe, Russia, Vietnam, etc..  
L
M
N
O
P
Q
R
S
T
U
V
W
W+ 1  
X
Y
Z
Z+ 1  
Z+ 2  
R3  
R4  
R5  
AUSTRALIA Australia, etc..  
AU- 3  
AU- 4  
CC 79  
CC 95  
CC 96  
CC 97  
CC 98  
CC 99  
A- 5  
A- 4  
A- 3  
A- 2  
A- 1  
13  
 
Additional preparation  
The illustrations shown in this section are for AV-14145 only, which are used for explanation purpose.  
Your TV may not look exactly the same as illustrated.  
Before connecting  
• Read the manuals provided with the devices  
for the proper connection.  
Front of the TV  
Camcorder or TV game  
Turn off all the devices including the TV.  
• Note that connecting cables are not supplied.  
Headphones  
Rear of the TV  
VCR (for playing)  
DVD player  
(Composite signals)  
VCR (for recording)  
Troubleshooting  
If a problem occurs when you are using the TV, check the following troubleshooting guide before  
calling for repair.  
No picture,  
no sound  
• Deactivate the BLUE BACK function  
if it is turned on.  
• Choose the appropriate sound  
system. Refer to “SOUND SYSTEM”  
on page 9.  
Cannot operate the• The batteries may be exhausted.  
remote control  
Replace with new batteries (see  
page 6).  
• Ensure that you are operating the  
remote less than seven meters from  
the front of your TV.  
Snowy picture  
• Check the aerial cable and its  
connection with the TV.  
• Interference occurs caused by other  
devices such as an amplifier,  
personal computer, or a hair drier.  
Move such devices away from your  
TV.  
Cannot operate the• Press TV/VIDEO button to return to  
menus  
TV mode and try operating the  
menus.  
Stripes appear  
on the picture  
Cannot operate the• Deactivate the CHILD LOCK  
front control  
buttons  
function if it is turned on (see page  
11).  
Double-pictures • Interference occurs caused by  
TV is turned off • This may due to the AUTO SHUT  
(ghosting) occur  
signal reflecting from mountains or  
building. Try to adjust the aerial’s  
direction or use a better directional-  
ity antenna.  
suddenly  
OFF function is activated. Press the  
POWER button to turn on the TV.  
Colour patches  
appear at the  
corner of the  
screen  
• This may due to the magnetized  
device such as a speaker near to  
your TV. Keep the device apart  
from your TV. Alternately, you can  
also use the magnetic- shielded  
speaker.  
Poor picture  
• Choose the appropriate colour  
system. Refer to “COLOUR  
SYSTEM” on page 8.  
• Adjust the COLOUR or BRIGHT  
setting. Refer to Adjusting the  
picture - USER” on page 8.  
Image takes a  
• Image required time to stabilize  
short period to be before display.  
White and bright • Inevitable phenomenon due to the  
still image look as nature of the picture tube. This is  
if it were coloured not a malfunction.  
displayed  
This is not a malfunction.  
TV may emitted • This is due to a sudden change in  
crackling sound  
temperature and it is not a  
Top of the image • This is due to the condition of the  
malfunction. If the crackling sound  
is too frequent, request your service  
technician for inspection.  
from software  
products or video  
tape is distorted  
video signal whereby the image  
was not recorded properly.  
This is not a malfunction.  
Feel a slight  
• This is due to the static electricity  
of the picture tube and it will not  
electric shock  
when touching the harm the human body. This is not a  
TV screen  
malfunction.  
14  
 
Specifications  
TV RF systems  
B/G, I, D/K  
Colour systems  
TV mode: PAL, SECAM  
VIDEO mode: PAL, SECAM, NTSC 3.58 MHz, NTSC 4.43 MHz  
Receiving channels  
VHF low channel (VL), VHF high channel (VH), UHF channel (U)  
Receives cable channels in mid band, super band and hyper band.  
Power requirements  
AC 110 to 240 V, 50/60 Hz  
External input / output  
VIDEO-1:  
VIDEO-2:  
VIDEO input, AUDIO input  
VIDEO input, AUDIO input, (For AV-14148, You can  
choose to connect one of AUDIO input jacks)  
VIDEO output , AUDIO output  
OUTPUT:  
Headphone jack:  
stereo mini jack (3.5 mm diameter,  
sound is monaural)  
Design and specifications are subject to change without notice.  
15  
 
© 2004 Victor Company of Japan, Limited  
0904-NIC-JMT  
 

Insignia Refrigerator NS 4396508 2 User Manual
Intel Server S3000PT User Manual
John Deere Weather Radio OMPFP12515 User Manual
JVC Speaker System SR VS10U User Manual
JVC Stereo System 0305MWMMDWBET User Manual
Kenko Marine Instruments KCM 3100 User Manual
Kenmore Vacuum Cleaner 11623637C User Manual
Kicker Car Speaker RMB6 User Manual
KitchenAid Dishwasher W10300220B User Manual
Kodak Digital Camera M863 User Manual