JVC DVD VCR Combo LPT1056 001A User Manual

DVD PLAYER &  
VIDEO CASSETTE RECORDER  
HR-XV28S  
PAL  
INSTRUCTIONS  
EN  
LPT1056-001A  
 
Recording from External Components. . . . . . . . . .27  
Copying from DVD to VCR . . . . . . . . . . . . . . . . . .27  
Operation with DVD and Video CD . . . . . . . . . . 28-30  
Playback Setup . . . . . . . . . . . . . . . . . . . . . . . . . . .28  
General Features . . . . . . . . . . . . . . . . . . . . . . . . .28  
Moving to another TITLE . . . . . . . . . . . . . . . .28  
Moving to another CHAPTER / TRACK . . . . .28  
Slow Motion . . . . . . . . . . . . . . . . . . . . . . . . . .28  
Still Picture and Frame-by-Frame Playback . .29  
Search. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .29  
Time Search . . . . . . . . . . . . . . . . . . . . . . . . . .29  
Marker Search . . . . . . . . . . . . . . . . . . . . . . . .29  
Repeat . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .29  
Repeat A-B . . . . . . . . . . . . . . . . . . . . . . . . . . .29  
Changing the Audio Channel . . . . . . . . . . . . .30  
Last Scene Memory . . . . . . . . . . . . . . . . . . . .30  
Instant Replay. . . . . . . . . . . . . . . . . . . . . . . . .30  
Screen Saver . . . . . . . . . . . . . . . . . . . . . . . . .30  
Special DVD Features . . . . . . . . . . . . . . . . . . . . .30  
Title Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . .30  
Disc Menu. . . . . . . . . . . . . . . . . . . . . . . . . . . .30  
Operation with Audio CD and MP3 Disc . . . . . . . . .31  
On-Screen Display - DVD . . . . . . . . . . . . . . . . . . .31  
Maintenance and Service . . . . . . . . . . . . . . . . . . .31  
Playing an Audio CD or MP3 Disc . . . . . . . . . . . 32-34  
Audio CD and MP3 Disc Features . . . . . . . . . . . .33  
Pause . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .33  
Repeat Track / All / Off . . . . . . . . . . . . . . . . . .33  
Search. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .33  
Random . . . . . . . . . . . . . . . . . . . . . . . . . . . . .33  
Programmed Playback . . . . . . . . . . . . . . . . . . . . .34  
Repeat Programmed Tracks . . . . . . . . . . . . . .34  
Erasing a Track from “Program” List . . . . . . . .34  
Erasing the Complete Program List . . . . . . . .34  
Viewing a JPEG Disc. . . . . . . . . . . . . . . . . . . . . . . . .35  
Slide Show. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .35  
Still Picture. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .35  
Moving to another File . . . . . . . . . . . . . . . . . . . . . .35  
Selecting the Viewing Source . . . . . . . . . . . . . . . . 5  
Front Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6  
Display Window . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7  
Remote Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8  
To set the colour system . . . . . . . . . . . . . . . . . . . 13  
Tuning in TV Stations Manually . . . . . . . . . . . . . . 15  
Changing the order of TV Stations . . . . . . . . . . . . . . 16  
Before Operation-DVD part . . . . . . . . . . . . . . . . .17-19  
General Operation . . . . . . . . . . . . . . . . . . . . . . . . 17  
Menu Language. . . . . . . . . . . . . . . . . . . . . . . 17  
Disc Audio / Subtitle / Menu. . . . . . . . . . . . . . 17  
DISPLAY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17  
Display Mode. . . . . . . . . . . . . . . . . . . . . . . . . 17  
AUDIO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18  
Dolby Digital / DTS / MPEG. . . . . . . . . . . . . . 18  
DRC (Dynamic Range Control) . . . . . . . . . . . 18  
OTHERS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18  
PBC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18  
Auto Play . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18  
LOCK (Parental Control) . . . . . . . . . . . . . . . . . . . 19  
Rating . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19  
Language and Area Code List . . . . . . . . . . . . . . . . .36  
Language Code List. . . . . . . . . . . . . . . . . . . . . . . .36  
Area Code List. . . . . . . . . . . . . . . . . . . . . . . . . . . .36  
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . 37-38  
Specification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .39  
Timer recording using On Screen Display . . . .23-24  
Additional Operation - VCR part. . . . . . . . . . . . .25-27  
Hi-Fi Stereo Sound System (NIC) . . . . . . . . . . . . 25  
On Screen Display (F.OSD) . . . . . . . . . . . . . . . . 25  
Tape Counter Memory Stop . . . . . . . . . . . . . . . . 25  
Video Doctor (Self-Diagnosis) . . . . . . . . . . . . . . . 26  
About the symbols for instructions  
Indicates hazards likely to cause harm to the unit  
itself or other material damage.  
Note: Indicates special operating features of this unit.  
Tip: Indicates tips and hints for making the task easier.  
3
 
 
Before Use  
Track (Video CD and audio CD only)  
Playable Discs  
Sections of a picture or a musical piece on a video CD or  
an audio CD. Each track is assigned a track number,  
enabling you to locate the track you want.  
DVD  
(8 cm / 12 cm disc)  
Scene  
Video CD (VCD)  
On a video CD with PBC (Playback control) functions,  
moving pictures and still pictures are divided into  
sections called “Scenes”. Each scene is displayed in the  
menu screen and assigned a scene number, enabling  
you to locate the scene you want.  
(8 cm / 12 cm disc)  
Audio CD  
(8 cm / 12 cm disc)  
In addition, this unit can play SVCD, DVD R/RW and  
CD-R/RW that contains audio titles, MP3 or JPEG files.  
A scene is composed of one or several tracks.  
Notes:  
Types of video CDs  
Depending on the conditions of the recording  
equipment or the CD-R/RW (or DVD R/RW) disc  
itself, some CD-R/RW (or DVD R/RW) discs cannot  
be played on the unit.  
Do not attach any seal or label to either side (the  
labeled side or the recorded side) of a disc.  
Do not use irregular shaped CDs (e.g., heart-shaped  
or octagonal). It may result in malfunctions.  
There are two types of video CDs:  
Video CDs equipped with PBC (Version 2.0)  
PBC (Playback control) functions allow you to interact  
with the system via menus, search functions, or other  
typical computer-like operations. Moreover, still pictures  
of high resolution can be played if they are included in the  
disc.  
Video CDs not equipped with PBC (Version 1.1)  
Operated in the same way as audio CDs, these discs  
allow playback of video pictures as well as sound, but  
they are not equipped with PBC.  
Notes on DVDs and Video CDs  
Some playback operations of DVDs and Video CDs may  
be intentionally programmed by software manufacturers.  
This unit plays DVDs and Video CDs according to disc  
content designed by the software manufacturer,  
therefore some playback features may not be available or  
other functions may be added.  
Remote Control Operation Range  
Regional code of the DVD player and DVDs  
This DVD player is designed and manufactured for  
playback of region “2” encoded DVD software.  
The region code on the labels of some DVD  
discs indicates which type of player can play  
Point the remote control at the remote sensor and press  
the buttons.  
• Distance: About 23 ft (7 m) from the front of the  
remote sensor  
• Angle: About 30° in each direction of the front of the  
remote sensor  
2
those discs. This unit can play only DVD discs  
labeled “2” or “ALL. If you try to play any  
other discs, the message “Check Regional Code” will  
appear on the TV screen. Some DVD discs may not have  
a region code label even though their playback is  
prohibited by area limits.  
Remote control battery installation  
Detach the battery cover on the rear of the  
remote control, and insert two (R03/AAA)  
size batteries with + and - aligned  
correctly.  
Disc-related terms  
Caution  
Title (DVD only)  
Do not mix old and new batteries. Never mix different  
types of batteries (standard, alkaline, etc.).  
The main film content or accompanying feature content  
or additional feature content, or music album. Each title  
is assigned a title reference number enabling you to  
locate it easily.  
Chapter (DVD only)  
Sections of a picture or a musical piece that are smaller  
than titles. A title is composed of one or several chapters.  
Each chapter is assigned a chapter number, enable you  
to locate the chapter you want. Depending on the disc,  
chapters may not be recorded.  
4
 
     
Before Use (Continued)  
Precautions  
Cleaning discs  
Fingerprints and dust on the disc can cause poor picture  
quality and sound distortion. Before playing, clean the  
disc with a clean cloth. Wipe the disc from the center out.  
Handling the unit  
When shipping the unit  
The original shipping carton and packing materials come  
in handy. For maximum protection, re-pack the unit as it  
was originally packed at the factory.  
When setting the unit  
The picture and sound of a nearby TV or radio may be  
distorted during playback. In this case, position the unit  
away from the TV or radio, or turn off the unit after  
removing the disc.  
Do not use strong solvents such as alcohol, benzine,  
thinner, commercially available cleaners, or anti-static  
spray intended for older vinyl records.  
To keep the surface clean  
Do not use volatile liquids, such as insecticide spray,  
near the unit. Do not leave rubber of plastic products in  
contact with the unit for a long period of time. They will  
leave marks on the surface.  
About Symbols  
About the  
symbol display  
Cleaning the unit  
” may appear on the TV screen during operation.  
To clean the cabinet  
This icon means the function explained in this owner’s  
manual is not permitted by the DVD+VCR or is not  
available on that specific DVD video disc.  
Use a soft, dry cloth. If the surfaces are extremely dirty,  
use a soft cloth lightly moistened with a mild detergent  
solution. Do not use strong solvents, such as alcohol,  
benzine, or thinner, as these might damage the surface  
of the unit.  
About the disc symbols for instructions  
To obtain a clear picture  
A section whose title has one of the following symbol is  
applicable only to the disc represented by the symbol.  
The DVD player is a high-tech, precision device. If the  
optical pick-up lens and disc drive parts are dirty or worn  
down, the picture quality will be poor.  
Regular inspection and maintenance are recommended  
after every 1,000 hours of use. (This depends on the  
operating environment.)  
DVD  
VCD  
CD  
DVD  
Video CDs.  
Audio CDs.  
MP3 disc.  
JPEG disc.  
MP3  
JPEG  
For details, please contact your nearest dealer.  
Notes on Discs  
Selecting the Viewing Source  
You must select one of your output sources (DVD or  
VCR) to view on the TV screen.  
Handling discs  
Do not touch the playback side of the disc.  
Hold the disc by the edges so that fingerprints will not get  
on the surface.  
• If you want to view DVD deck output source:  
Press DVD until DVD indicator in the display window lights  
and output source of DVD deck is viewed on the TV screen.  
• If you want to view VCR deck output source:  
Do not stick paper or tape on the disc.  
Press VCR until VCR indicator in the display window lights  
and output source of VCR deck is viewed on the TV screen.  
Notes:  
If you insert a disc while the DVD+VCR is in the VCR  
mode, the DVD+VCR will switch to DVD mode  
automatically.  
If you insert a cassette tape without prevention tab  
while the DVD+VCR is in the DVD mode, the  
DVD+VCR will switch to VCR mode automatically.  
Storing discs  
After playing, store the disc in its case.  
Do not expose the disc to direct sunlight or sources of  
heat, or leave it in a parked car exposed to direct  
sunlight, as there may be a considerable temperature  
increase inside the car.  
5
 
       
Front Panel  
Disc Tray (DVD deck)  
Insert a disc here.  
Cassette Compartment (VCR deck)  
Insert a video cassette here.  
Remote Sensor  
Point the DVD+VCR remote control here.  
Display Windows  
< OPEN/CLOSE  
Opens or closes the disc tray.  
;
Pause playback or recording. Press  
repeatedly for frame-by-frame playback.  
Stops playback of the disc or tape.  
< EJECT  
Ejects the tape in the VCR deck.  
PROG. (-/+)  
To scan up or down through memorized channels.  
5
- DVD: Skip to next chapter or track. Press and hold for two  
seconds for a fast forward search.  
- VCR: Advances the tape during the STOP mode or for fast  
forward picture search.  
¥
To record normally or to activate  
One-touch Timer Recording by  
repeated presses.  
1
Starts playback of a disc or tape.  
6
- DVD: Skip to beginning of current chapter or track, press twice in quick  
successions to go to previous chapter or track. Press and hold button for  
about two seconds to search backward.  
- VCR: Rewinds the tape during the stop mode or for fast reverse picture  
search.  
VCR/DVD  
Select one of your output sources to view on the TV  
screen between DVD and VCR.  
Video IN Jack  
Audio IN (L/R) Jacks  
Í/I  
Switches the DVD+VCR ON and STANDBY.  
6
 
 
Display Window  
The DVD deck is selected.  
A disc is in the DVD deck.  
(Lights when a disc is in the DVD deck  
and Flashes when no disc.)  
Indicates repeat mode.  
DVD+VCR is in timer recording or a timer  
recording is programmed. (VCR part only)  
A cassette is in the VCR deck.  
The VCR deck is selected.  
Lights when TV mode is active.  
DVD+VCR is Recording.  
(VCR part only)  
Indicates total playing time, elapsed time, remaining time or  
current deck status (Playback, Pause, etc).  
7
 
 
Remote Control  
OPEN/CLOSE, EJECT (<)  
- Ejects the tape in the VCR deck.  
- Opens and closes the disc tray.  
Í/I  
Switches DVD+VCR ON and STANDBY  
.
TV/VCR •  
To view channels selected by the VCR  
tuner or by the TV tuner.  
AUX  
Select input source for recording into  
tape.  
DVD •  
Select the DVD+VCR function mode to  
DVD.  
DISC MENU  
Accesses menu on a DVD disc.  
SKIP (:/9)  
VCR •  
Select the DVD+VCR function mode to  
VCR.  
Skip to beginning of current chapter or  
track, press twice in quick successions  
to go to previous chapter or track.  
Skip to next chapter or track.  
DISPLAY  
- - : - -  
- Accesses On-Screen Display (DVD).  
- Shows you the current time or counter  
(VCR).  
RETURN  
- Removes the setup menu.  
- Displays the menu of a video CD with  
PBC.  
2/1/3/4  
- Selects menu options.  
- PR/TRK (+/-): Selects VCR channels.  
Adjusts manually the tape’s picture on  
the screen.  
Stops playback or recording.  
MNL. PROG.  
Places a track on the program list.  
SETUP/MENU (i)  
Accesses or removes DVD Setup  
menu and VCR menu.  
CLEAR (  
)
Removes a track number on the  
program menu or a mark on the  
MARKER SEARCH menu.  
ENTER/OK  
Confirms menu selections. Displays  
functions on the TV screen.  
• A.MONITOR  
Selects an audio language (DVD) or an  
audio channel (VCD).  
;
- Pause playback or recording.  
- Press repeatedly for frame-by-frame  
playback.  
• SUBTITLE  
Selects a subtitle language.  
• ANGLE  
(6) •  
- For fast reverse picture search.  
- Rewinds the tape during the STOP  
mode.  
Selects a DVD camera angle, if  
available.  
• ZOOM  
Enlarges DVD video image.  
1
Starts playback.  
• MARKER  
Marks any point during playback.  
(5) •  
- For fast forward picture search.  
- Advances the tape during the STOP  
mode.  
• SEARCH  
Displays Marker Search menu.  
• TITLE  
Displays the disc’s Title menu, if  
available.  
0-9 numerical buttons  
Selects numbered options in a menu.  
REPEAT •  
• REC (¥)  
Records normally or activates One  
touch Timer Recording with repeated  
presses.  
Repeat chapter, track, title or all.  
RANDOM (  
) •  
- Plays tracks in random order.  
- CM SKIP  
REPEAT A-B •  
Repeats sequence between two points  
(A and B)  
Selects recording speed.  
SHOWVIEW •  
To display the programme menu for  
ShowView programming.  
Note:  
This remote control uses the same buttons for VCR and  
DVD functions (ex. PLAY).  
When using a VCR, first press the VCR button.  
When using a DVD, first press the DVD button.  
8
 
 
Rear Panel  
AERIAL  
Connect the aerial using this jack.  
DVD/VCR OUT (VIDEO/AUDIO (Left/Right))  
Connect to a TV with video and audio inputs.  
AUDIO OUT (Left/Right) (DVD EXCLUSIVE OUT)  
Connect to an amplifier, receiver or stereo system.  
EURO AV2 DECODER (VCR IN+OUT/DVD OUT)  
Connect to pay-TV decoder, Set Top Box or another  
video recorder.  
AC Power Cord  
Connect to a power source.  
EURO AV1 AUDIO/VIDEO (VCR IN+OUT/DVD OUT)  
Connect to your TV set or another video recorder.  
COAXIAL (DVD EXCLUSIVE OUT)  
(Digital audio out jack)  
Connect to digital (coaxial) audio equipment.  
RF.OUT  
Connect to your TV using this jack.  
Do not touch the inner pins of the jacks on the rear panel.  
Electrostatic discharge may cause permanent damage to the unit.  
9
 
 
Precautions  
Connections  
When the equipment is installed in a cabinet or a shelf, make  
sure that it has sufficient space on all sides to allow for  
ventilation (10 cm or more on both sides, on top and at the rear).  
Tips:  
Depending on your TV and other equipment there are  
various ways you can connect the player.  
Please refer to the manuals of your TV, VCR, stereo  
system or other devices as necessary for additional  
connection information.  
When discarding batteries, environmental problems must be  
considered and the local rules or laws governing the disposal of  
these batteries must be followed strictly.  
Failure to heed the following precautions may result in  
damage to the unit, remote control or disc.  
1. DO NOT place the unit —  
Notes:  
The picture and sound of a nearby TV, VCR, or radio may be  
distorted during playback. Position the units away from each  
other or turn off the unit after removing the disc.  
Make sure the DVD+VCR is connected directly to the TV and  
tune the TV to the correct video input channel.  
Do not connect the DVD+VCR’s AUDIO OUT jack to the  
phono in jack (record deck) of your audio system. Do not  
connect the DVD+VCR via another VCR. The DVD image  
could be distorted by the copy protection system.  
— in an environment prone to extreme temperatures or  
humidity.  
— in direct sunlight.  
— in a dusty environment.  
— in an environment where strong magnetic fields are  
generated.  
— on a surface that is unstable or subject to vibration.  
2. DO NOT block the unit’s ventilation openings or holes.  
(If the ventilation openings or holes are blocked by a  
newspaper or cloth, etc., the heat may not be able to get  
out.)  
3. DO NOT place heavy objects on the unit or remote  
Connecting to a TV  
control.  
4. DO NOT place anything which might spill on top of the  
unit or remote control.  
Make one of the following connections, depending on the  
capabilities of your existing equipment.  
(If water or liquid is allowed to enter this equipment, fire or  
electric shock may be caused.)  
5. DO NOT expose the apparatus to dripping or splashing.  
6. DO NOT use this equipment in a bathroom or places  
with water. Also DO NOT place any containers filled with  
water or liquids (such as cosmetics or medicines, flower  
vases, potted plants, cups, etc.) on top of this unit.  
7. DO NOT place any naked flame sources, such as lighted  
candles, on the apparatus.  
Basic connection (AV)  
1. Connect the EURO AV1 AUDIO/VIDEO on the rear  
panel of this unit to the SCART input socket on the  
TV using a SCART lead (not supplied).  
For TV without SCART, connect the yellow VIDEO  
OUT jack and DVD/VCR AUDIO OUT jacks of this  
unit to the TV.  
8. AVOID violent shocks to the unit during transport.  
2. Some TV broadcasters transmit encoded television  
signals which you can only see with a purchased or  
rented decoder. You can connect such a decoder  
(descrambler) to this unit.  
Basic connection (RF)  
1. Connect the RF antenna cable from your indoor/  
outdoor antenna to AERIAL jack on the rear panel of  
this unit.  
2. Connect the supplied RF antenna cable from the  
RF.OUT jack on the rear panel of this unit to your  
television’s Antenna Input.  
Rear of TV  
AERIAL  
VIDEO IN  
AUDIO INPUT  
SCART INPUT  
L
R
Satellite or Set Top Box  
Rear of this unit (Basic connection)  
10  
 
   
Connections (Continued)  
Notes:  
Connecting to Optional  
Equipment  
If the audio format of the digital output does not match  
the capabilities of your receiver, the receiver will  
produce a strong, distorted sound or no sound at all.  
Six Channel Digital Surround Sound via digital  
connection can only be obtained if your receiver is  
equipped with a Digital Multi-channel decoder.  
To see the audio format of the current DVD in the On-  
Screen Display, press A.MONITOR.  
Connecting to an amplifier equipped with two  
channel analog stereo or Dolby Pro Logic II/Pro  
Logic  
Connect the Left and Right DVD/VCR AUDIO OUT or  
AUDIO OUT (DVD EXCLUSIVE OUT) jacks on this unit  
to the audio left and right in jacks on your amplifier,  
receiver or stereo system, using the audio cables.  
Connecting to an amplifier equipped with two  
channel digital stereo (PCM) or to an Audio/  
Video receiver equipped with a multi-channel  
decoder (Dolby Digital™, MPEG 2 or DTS)  
1. Connect one of this unit’s DIGITAL AUDIO OUT jack  
(COAXIAL) to the corresponding in jack on your  
amplifier. Use an optional digital (coaxial) audio  
cable.  
2. You will need to activate this unit’s digital output.  
(See “AUDIO” on page 18).  
Digital Multi-channel sound  
A digital multi-channel connection provides the best  
sound quality. For this you need a multi-channel Audio/  
Video receiver that supports one or more of the audio  
formats supported by your unit (MPEG 2, Dolby Digital  
and DTS). Check the receiver manual and the logos on  
the front of the receiver.  
Warning:  
Due to the DTS Licensing agreement, the digital output  
will be in DTS digital out when DTS audio stream is  
selected.  
Rear of this unit  
2 channel analog stereo or Dolby Surround connection.  
Digital multi-channel  
DVD exclusive out  
connection  
R
L
COAXIAL  
DIGITAL INPUT  
AUDIO INPUT  
Amplifier (Receiver)  
11  
 
 
Before Operation-VCR part  
7. Use PROG. (+/-) to select another video channel.  
You may select any channel number between 22 and  
68.  
Tuning in a video channel on your TV  
Notes:  
The output frequency of this DVD+VCR is set at UHF  
channel 36. If channel 36 is already used by another  
TV station, or if the picture is distorted, you can  
change the transmitter channel of your DVD+VCR.  
Stages 5 ~ 8 will show you how to change the output  
frequency of your DVD+VCR.  
Your TV receives signals from the DVD+VCR like  
another TV station. You have to select a channel  
number on your TV and tune it in so that you may  
watch video tapes. If you have used a SCART then  
your TV should already have a dedicated video  
channel built into it, usually called AV.  
8. Select a TV channel which you wish to watch video.  
Press Í/I on the front of your DVD+VCR when you  
have finished.  
Tune this channel so that a bright blue screen  
appears.  
Store this channel on your TV.  
Notes:  
Make sure that you have correctly installed your DVD+VCR and  
successfully tuned in a dedicated video channel on your TV. If  
you do not tune in a dedicated video channel on your TV you will  
be unable to view and record video tapes!  
1. Make sure that you have correctly installed your  
DVD+VCR as described earlier in this book.  
Press Í/I to turn on your DVD+VCR.  
Turn on your TV.  
Initial preset  
For the following steps we do assume that you have just  
connected your video recorder for the very first time. In  
this case the video recorder is on after mains connection.  
You should not touch any buttons yet. On the connected  
TV you will now see.  
2. Insert a pre-recorded video tape into your DVD+VCR  
and press  
1
on the remote control.  
Select a TV channel which you wish to watch video.  
Don’t worry if you don’t have a video-tape to play at  
this stage! If you switch your DVD+VCR on and  
continue stages 3 ~ 4, instead of seeing video  
playback tune your TV until you see a bright blue  
screen.  
Note:  
If this menu does not appear, your video recorder was  
programmed already.  
1. Select the country according to your area with 2  
and 1.  
3. Tune this channel until the video picture is sharp and  
the sound is clear.  
“A”: Austria, “B”: Belgium, “CH”: Switzerland, “D”:  
Germany, DK”: Denmark, “E”: Spain, “F”: France,  
“I”: Italy, N”: Norway, NL: Netherlands, “P”:  
Portugal, “S”: Sweden, “SF”: Finland, “OTHERS”  
If you have used a SCART or AUDIO and VIDEO  
cables you will not have to tune your TV, simply  
select the AV channel. The AV channel is already  
pre-tuned for optimum video playback on your TV.  
4. Store this channel on your TV.  
You will need to look at the TV instruction book if you  
do not know how to do this.  
A
N
B
NL  
CH  
P
D
S
DK  
E
F
I
SF OTHERS  
Pr-12  
OK  
i
5. Only carry out stages 5 ~ 8 if you cannot obtain  
clear video playback as described in stages 1 ~  
4.  
ACMS  
2. Press ENTER/OK to start the automatic storing of  
the channels of the TV stations in your area.  
Select a TV channel which you wish to watch video.  
Make sure that your DVD+VCR is in standby  
pressing Í/I on the remote control (only the clock  
will be displayed).  
6. Press PROG. (+/-) on the front of your DVD+VCR for  
more than 4 seconds.  
S
E
Pr-12  
i
ACMS  
RF36 will appear in the display window.  
The following picture will be displayed on the TV  
screen.  
3. The TV STATION TABLE will appear when tuning is  
completed.  
Press i to save your settings.  
RF CHANNEL 36  
P
SET  
i
R
12  
 
     
Before Operation-VCR part  
Setting the clock Manually  
To set the colour system  
1. Press i.  
The clock in your DVD+VCR controls time and date  
settings for your DVD+VCR.  
2. The main menu will appear on the TV screen.  
1. Press i.  
3. Press 2 or 1 to select the SYS and press ENTER/  
OK.  
Press 2 or 1 to select SET.  
Press ENTER/OK.  
The auto adjust mode can be set to “OFF” by  
pressing ENTER/OK if you want to set the time  
manually.  
4. Press 3 or 4 to select according to the COLOUR  
system used.  
AUTO  
PAL  
HH MN DD MM YY  
SYS  
MESECAM  
SYS  
:
-
-
.
.
- - - - -  
- -  
- -  
- -  
f
OSD  
ON  
OFF  
i
1
2
i
SET  
5. Press 2 or 1 to select the RF AUDIO.  
Press 3 or 4 to select according to the RF AUDIO  
used.  
2. Use the 3 or 4 on the remote control to alter the  
HOURS, MINUTES, DAY, MONTH and YEAR.  
Please note your DVD+VCR uses a 24 hour clock.  
e.g. 1pm will be displayed as 13:00.  
The day of the week will appear automatically when  
you enter the year.  
RF I/I  
RF B/G
SYS  
RF D/K  
SYS  
3. If you make a mistake press 2 or 1 and enter the  
f
OSD  
ON  
OFF  
i
correct details.  
6. Press i to remove the menus from the TV screen.  
HH MN DD MM YY  
8
:
00  
1
.
01  
.
05 SAT  
1
2
i
SET  
4. Press i to return to a TV picture.  
13  
 
   
Before Operation-VCR part  
How to use the main menu  
Tuning in TV Stations  
Automatically  
This DVD+VCR can easily be programmed by  
using the menus displayed on screen.  
The menus are controlled by the Remote Control  
Handset.  
If the TV broadcast signal is weak your DVD+VCR  
may not detect the necessary information and will  
not be able to store them correctly. To overcome  
this problem please turn to the MANUAL TUNING  
section on page 15.  
1. Switch on your TV set and DVD+VCR by pressing  
the Í/I button.  
2. Press i button.  
1. Press Í/I to turn on your DVD+VCR.  
The main menu will appear on the TV screen.  
2. Press i button.  
The main menu will appear on the TV screen.  
Press 2 or 1 to select the ACMS.  
Press ENTER/OK.  
1
2
SET SYS  
f
OSD  
ON  
OFF  
• REC - Timer recording setting (see p. 23).  
• PR SET - Manual tuning setting (see p. 15).  
• ACMS - ACMS (Automatic Channel Memory  
System) (see p. 14).  
1
2
Pr-12  
ACMS SET SYS  
Pr-12  
ACMS  
f
OSD  
ON  
OFF  
OK  
i
• SET - Date & clock setting (see p. 13).  
• SYS - To set the Colour TV System (see p. 13).  
(Dr.) - To check a problem with your VCR (see  
p. 26).  
A
N
B
NL  
CH  
P
D
S
DK  
E
F
I
SF OTHERS  
F.OSD ON/OFF - To display the operational mode  
of your VCR (see p. 25).  
Pr-12  
ACMS  
OK  
i
(16:9/4:3) - To select the aspect ratio of your  
TV (see p. 26).  
3. Select the country according to your area with 2 or  
1.  
• DECODER - To use a pay-TV decoder (or  
A:Austria, B:Belgium, CH:Switzerland, D:Germany,  
DK:Denmark, E:Spain, F:France, I:Italy, N:Norway,  
NL:Netherlands, P:Portugal, S:Sweden,  
SF:Finland, “OTHERS”  
Satellite) with your VCR (see p. 26).  
(OPR) - To improve the playback picture (see p.  
20).  
Appear when playback only.  
• NIC - To activate or deactivate the NICAM digital  
sound (see p. 25).  
4. Press ENTER/OK to start the automatic storing of  
the channels of the TV stations in your area.  
Tip:  
5. The TV STATION TABLE will appear when tuning is  
completed.  
You can change the menu language on the DVD setup  
menu. (See the Menu Language on page 17.)  
Press i to save your settings.  
3. Press 2 and 1 to select the desired menu.  
Press ENTER/OK and use 3 or 4 to select.  
01  
02  
03  
04  
05  
06  
07  
08  
C01  
C02  
C03  
- -  
- -  
- -  
00  
00  
00  
- -  
- -  
- -  
- -  
- -  
- - - - -  
- - - - -  
- - - - -  
- - - - -  
- - - - -  
- - - - -  
- - - - -  
- - - - -  
4. Press i to return to a TV picture.  
- -  
- -  
DELETE :  
P
SET  
,
OK  
i
R
Notes:  
The DVD+VCR’s clock will be set automatically when  
automatic tuning has finished. If the clock is wrong  
please see “Setting the clock Manually” on page 13.  
14  
 
   
Before Operation-VCR part  
Tuning in TV Stations Manually  
In certain areas of the country broadcast signals  
may be too weak for your DVD+VCR’s automatic  
tuning process to find or assign TV stations  
correctly.  
PR  
04  
CH  
C04  
MFT  
00  
STATION  
CHANNEL/CABLE : AV  
P
i
SET  
R
You must tune in these weaker broadcast stations  
manually in order for your DVD+VCR to store them.  
6. Press 1 to select STATION so that you may name  
your TV station.  
Press OK.  
1. Press i.  
7. Use 3 or 4 to select letters and numbers for the  
The main menu will appear on the TV screen.  
Press 2 or 1 to select the PR SET.  
Press OK.  
station name.  
Use 2 or 1 to move back and forth between  
characters.  
Press OK.  
1
2
Pr-12  
P
ACMS  
SET  
SET SYS  
R
P
SET  
R
PR  
04  
CH  
C04  
MFT  
00  
f
STATION  
-
OSD  
ON  
OFF  
P
SET  
OK  
i
R
8. Press i, confirm the station placement.  
PR  
01  
CH  
C03  
MFT  
00  
STATION  
PR-03  
CHANNEL/CABLE : AV  
P
SET  
i
R
PR  
04 C04  
CH  
MFT  
00  
STATION  
PR-04  
2. Press i.  
The station table will appear.  
P
SET  
OK  
i
R
3. Press 3 or 4 to select the programme number that  
If you wish to manually tune other stations repeat  
stages 3 - 8.  
you want to tune (for example, PR 04).  
01  
02  
03  
04  
05  
06  
07  
08  
C01  
C02  
C03  
- -  
- -  
- -  
00  
00  
00  
- -  
- -  
- -  
- -  
- -  
- - - - -  
- - - - -  
- - - - -  
- - - - -  
- - - - -  
- - - - -  
- - - - -  
- - - - -  
01  
02  
03  
04  
05  
06  
07  
08  
C01  
C02  
C03  
C04  
- -  
- -  
- -  
- -  
00  
00  
00  
00  
- -  
- -  
- -  
- -  
PR-00  
PR-02  
PR-03  
PR-04  
- - - - -  
- - - - -  
- - - - -  
- - - - -  
- -  
- -  
MOVE :  
DELETE :  
P
SET  
,
OK  
i
R
MOVE :  
DELETE :  
P
SET  
,
OK  
i
R
4. Press OK.  
9. Press i again.  
Press AUX to select C (Standard stations) or S  
(Cable stations):  
C02 - C69, S01 - S41.  
Your new TV station has now been tuned into your  
DVD+VCR.  
Enter the channel number of station that you want to  
tune, use 3 or 4 to find the required station.  
PR  
04  
CH  
C - -  
MFT  
- -  
STATION  
- - - -  
CHANNEL/CABLE : AV  
P
SET  
i
R
5. Searching will stop when it locates a stations.  
Press 1 to select MFT.  
Control the fine tuning of the station by using 3 or  
4.  
15  
 
 
Before Operation-VCR part  
Changing the order of TV Stations  
Deleting TV Stations  
After tuning TV stations into your DVD+VCR you  
may wish to change the order in which they are  
stored without having to retune them again. The  
instructions given on this page will show you how  
you can simply move them into your desired order.  
After tuning TV stations into your DVD+VCR you  
may wish to delete a station.  
The instructions given on this page will show you  
how you can easily delete any unwanted TV  
stations.  
1. Press i.  
1. Press i.  
The main menu will appear on the TV screen.  
Press 2 or 1 to select the PR SET.  
Press ENTER/OK.  
The main menu will appear on the TV screen.  
Use 2 or 1 to select the PR SET.  
Press ENTER/OK.  
PR  
01  
CH  
C03  
MFT  
00  
STATION  
PR-03  
PR  
01  
CH  
C03  
MFT  
00  
STATION  
PR-03  
1
2
1
2
Pr-12  
Pr-12  
P
P
SET  
R
ACMS  
ACMS  
SET  
SET SYS  
SET SYS  
R
P
P
SET  
R
SET  
R
f
f
OSD  
ON  
OFF  
OSD  
ON  
OFF  
CHANNEL/CABLE : AV  
CHANNEL/CABLE : AV  
P
P
SET  
R
SET  
i
i
R
2. Press i.  
2. Press i.  
Press 3 or 4 to select the programme number  
you want to move (for example, PR-03).  
Press 1.  
3. Press 3 or 4 to select the programme number  
you want to delete. (for example, PR-00)  
01  
02  
03  
04  
05  
06  
07  
08  
C01  
C02  
C04  
- -  
C03  
- -  
00  
00  
00  
- -  
00  
- -  
- -  
- -  
PR-00  
PR-02  
PR-04  
- - - - -  
PR-03  
- - - - -  
- - - - -  
- - - - -  
01  
02  
03  
04  
05  
06  
07  
08  
C01  
C02  
C03  
C04  
- -  
- -  
- -  
- -  
00  
00  
00  
00  
- -  
- -  
- -  
- -  
PR-00  
PR-02  
PR-03  
PR-04  
- - - - -  
- - - - -  
- - - - -  
- - - - -  
01  
02  
03  
04  
05  
06  
07  
08  
C01  
C02  
C03  
C04  
- -  
- -  
- -  
- -  
00  
00  
00  
00  
- -  
- -  
- -  
- -  
PR-00  
PR-02  
PR-03  
PR-04  
- - - - -  
- - - - -  
- - - - -  
- - - - -  
- -  
- -  
MOVE :  
DELETE :  
P
MOVE :  
DELETE :  
,
OK  
i
SET  
R
P
OK  
i
P
SET  
,
OK  
i
SET  
R
R
4. Press 2.  
3. Press 3 or 4 to select the programme number  
After a short while, the selected station will be  
deleted.  
you want to move to (for example, PR-05).  
If you wish to delete other TV stations repeat stages  
3 - 4.  
01  
02  
03  
04  
05  
06  
07  
08  
C01  
C02  
C04  
- -  
C03  
- -  
00  
00  
00  
- -  
00  
- -  
- -  
- -  
PR-00  
PR-02  
PR-04  
- - - - -  
PR-03  
- - - - -  
- - - - -  
- - - - -  
01  
02  
03  
04  
05  
06  
07  
08  
C01  
C02  
- -  
C03  
- -  
- -  
- -  
- -  
00  
00  
- -  
00  
- -  
- -  
- -  
- -  
PR-02  
PR-04  
- - - - -  
PR-03  
- - - - -  
- - - - -  
- - - - -  
- - - - -  
- -  
- -  
OK  
i
P
SET  
R
4. Press ENTER/OK.  
MOVE :  
DELETE :  
P
,
OK  
i
SET  
R
The selected programme will be moved to the new  
programme number.  
If you wish to move other TV stations repeat stages  
5. Press i to remove the menus from the TV screen.  
1 - 4.  
01  
02  
03  
04  
05  
06  
07  
08  
C01  
C02  
C04  
- -  
C03  
- -  
00  
00  
00  
- -  
00  
- -  
- -  
- -  
PR-00  
PR-02  
PR-04  
- - - - -  
PR-03  
- - - - -  
- - - - -  
- - - - -  
- -  
- -  
MOVE :  
DELETE :  
P
,
OK  
i
SET  
R
5. Press i to remove the menus from the TV screen.  
16  
 
   
Before Operation-DVD part  
By using the DVD Setup menu, you can make various  
adjustments to items such as picture and sound. You can  
also set a language for the subtitles and the Setup menu,  
among other things. For details on each Setup menu  
item, see pages 17 to 19.  
LANGUAGE  
LANGUAGE  
English  
Original  
Off  
Menu Language  
Disc Audio  
Disc Subtitle  
Disc Menu  
To display and exit the Menu:  
Original  
Press SETUP to display the menu. A second press of  
SETUP will take you back to initial screen.  
To go to the next level:  
Press 1 on the remote control.  
Move  
Select  
To go back to the previous level:  
Press 2 on the remote control.  
Menu Language  
Select a language for the VCR and DVD’s setup menu  
and information display.  
General Operation  
DVD  
Disc Audio / Subtitle / Menu  
1. Press DVD on the remote control.  
Select the language you prefer for the audio track (disc  
audio), subtitles, and the disc menu.  
2. Press SETUP.  
The Setup menu appears.  
Original: Refers to the original language in which the  
3. Use 3/4 to select the desired option then press 1  
to move to the second level. The screen shows the  
current setting for the selected item, as well as  
alternate setting(s).  
disc was recorded.  
Other: To select another language, press number  
buttons then ENTER/OK to enter the corresponding 4-  
digit number according to the language code list in the  
reference chapter (see page 36). If you enter the wrong  
4. Use 3/4 to select the second desired option then  
press 1 to move to the third level.  
language code, press CLEAR (  
).  
5. Use 3/4 to select the desired setting then press  
ENTER/OK to confirm your selection. Some items  
require additional steps.  
Off (for Disc Subtitle): Turn off Subtitle.  
DISPLAY  
6. Press SETUP or  
1
exit the Setup menu.  
DISPLAY  
TV Aspect  
16  
:
9 Wide  
Display Mode  
Widescreen  
Move  
Select  
DVD  
TV Aspect  
4:3 :  
Select when a standard 4:3 TV is connected.  
Select when a 16:9 wide TV is connected.  
16:9 :  
DVD  
Display Mode  
Display Mode setting works only when the TV Aspect  
mode is set to “4:3”.  
Letterbox: Displays a wide picture with bands on the  
upper and lower portions of the screen.  
Panscan: Automatically displays the wide picture on the  
entire screen and cuts off the portions that do not fit.  
17  
 
         
Before Operation-DVD part  
AUDIO  
OTHERS  
Each DVD disc has a variety of audio output options.  
Set this unit’s AUDIO options according to the type of  
audio system you use.  
The PBC and Auto Play settings can be changed.  
OTHERS  
PBC  
On  
Off  
AUDIO  
Auto Play  
Dolby Digital  
DTS  
Bitstream  
Bitstream  
PCM  
MPEG  
Sample Freq.  
DRC  
48KHz  
On  
Select  
Move  
Move  
Select  
VCD  
PBC  
Set Playback Control (PBC) to On or Off.  
DVD  
Dolby Digital / DTS / MPEG  
On: Video CDs with PBC are played according to the  
PBC.  
Bitstream: Select “Bitstream” if you connect the  
DVD+VCR’s DIGITAL AUDIO OUT jack to an  
amplifier or other equipment with a Dolby Digital,  
DTS or MPEG decoder.  
Off: Video CDs with PBC are played the same way as  
Audio CDs.  
PCM (for Dolby Digital / MPEG): Select when  
connected to a two-channel digital stereo amplifier.  
DVDs encoded in Dolby Digital or MPEG will be  
automatically downmixed to two-channel PCM  
audio.  
DVD  
Auto Play  
You can set up the DVD+VCR so a DVD disc  
automatically starts playing whenever the DVD is  
inserted.  
If Auto Play mode is set to On, this DVD player will search  
for title that has the longest playback time and then play  
back the title automatically.  
Off (for DTS): If you select “Off”, the DTS signal is  
not output through the DIGITAL AUDIO OUT jack.  
DVD  
Sample Freq. (Frequency)  
On: Auto Play function is active.  
If your receiver or amplifier is NOT capable of handling  
96 kHz signals, select 48 kHz. When this choice is made,  
this unit automatically converts any 96 kHz signals to 48  
kHz so your system can decode them.  
Off: Auto Play function is not active.  
Note:  
The Auto Play function may not work for some DVDs.  
If your receiver or amplifier is capable of handling 96 kHz  
signals, select 96 kHz. When this choice is made, this  
unit passes each type of signal through without any  
further processing.  
Check the documentation for your amplifier to verify its  
capabilities.  
DVD  
DRC (Dynamic Range Control)  
With the DVD format, you can hear a program’s  
soundtrack in the most accurate and realistic  
presentation possible, thanks to digital audio technology.  
However, you may wish to compress the dynamic range  
of the audio output (the difference between the loudest  
sounds and the quietest ones). This allows you to listen  
to a movie at a lower volume without losing clarity of  
sound. Set DRC to On for this effect.  
18  
 
     
Before Operation-DVD part  
LOCK (Parental Control)  
LOCK  
Password (Security Code)  
You can enter or change password.  
1. Select “Password” on the LOCK menu then press 1.  
Rating  
Unlock  
New  
2. Follow step 2 as shown left column (Rating).  
To change the password, select the “Change”, press  
ENTER/OK and input the new 4-digit code then  
press ENTER/OK. Input it again to verify.  
Password  
Area Code  
DG  
3. Press SETUP to exit the menu.  
Move  
Select  
If you forget your Security Code  
DVD  
Rating  
If you forget your security code you can clear it using  
the following steps:  
Some movies contain scenes that may not be suitable for  
children to view. Many of these discs contain parental  
control information that applies to the complete disc or to  
certain scenes on the disc. Movies and scenes are rated  
from 1 to 8, depending on the area.  
1. Press SETUP to display the Setup menu.  
2. Input the 6-digit number “210499” and the  
security code is cleared.  
DVD video discs may or may not respond to the parental  
control setting if the Area code of the disc is set wrongly.  
Some discs offer more suitable scenes as an alternative.  
Ratings are area dependent.  
3. Enter a new code as described above.  
DVD  
Area Code  
The parental control feature allows you to block access  
to scenes below the rating you input, thereby preventing  
your children from being able to view material you believe  
is unsuitable.  
Enter the Area Code whose standards were used to rate  
the DVD video disc, based on the list in the reference  
chapter (see page 36).  
1. Select “Area Code” on the LOCK menu then press  
1. Select “Rating” on the LOCK menu then press 1.  
1.  
2. To access the Rating, Password and Area Code  
features, you must input the 4-digit security code you  
created.  
2. Follow step 2 as shown left (Rating).  
3. Select the first character using 3/4 buttons.  
4. Press 1 and select the second character using 3/  
4 buttons.  
If you have not yet entered a security code you are  
prompted to do so. Input a 4-digit code and press  
ENTER/OK. Enter it again and press ENTER/OK to  
verify. If you make a mistake before pressing  
5. Press ENTER/OK to confirm your area code  
selection.  
ENTER/OK, press CLEAR (  
).  
3. Select a rating from 1 to 8 using the 3/4 buttons.  
1-8: Rating one (1) has the most restrictions and  
rating eight (8) has the least restrictive.  
Unlock: If you select unlock, parental control is not  
active and the disc plays in full.  
4. Press ENTER/OK to confirm your rating selection,  
then press SETUP to exit the menu.  
5. Press OPEN/CLOSE (<) to activate parental  
control.  
Note:  
If you set a rating for the player, all disc scenes with the same  
rating or lower are played. Higher rated scenes are not played  
unless an alternate scene is available on the disc. The  
alternative must have the same rating or a lower one. If no  
suitable alternative is found, playback stops. You must enter the  
4-digit password or change the rating level in order to play the  
disc.  
19  
 
     
Operation with tape  
Playing a tape  
Logic search:  
During fast forwarding or rewinding press and hold  
6 or 5 the picture will be played back at 7 times  
normal playback speed.  
You will only be able to load and eject video cassettes  
when your DVD+VCR is plugged into the mains.  
Your DVD+VCR may also playback recordings from  
NTSC tapes (on PAL TV).  
5. Slow motion playback, Shuttle:  
During playing back or still picture press 2 or 1.  
You can reach the following playback speeds.  
(-7xplay, -3xplay, -play, still, 1/19 slow, play, 2xplay,  
7xplay)  
Getting a better picture  
When a cassette is inserted and playback started,  
the automatic tracking function works to get the  
best possible picture automatically. If the quality of  
the recording is poor, repeatedly press 3 or 4 on  
the remote control to manually adjust the tracking  
until any distortions have been removed.  
To switch off the slow motion and shuttle, press the  
desired function.  
During slow motion and shuttle, the noise bars may  
appear on the picture according to the status of tape.  
If distortions can be seen in the picture, reduce them  
with 3 or 4.  
1. Make sure that you have correctly connected your  
DVD+VCR as described earlier in this book.  
Turn on your TV.  
6. Press to end playback.  
Press EJECT (<).  
Press Í/I to turn on your DVD+VCR.  
If the end of the tape is reached, your DVD+VCR will  
stop playback automatically, rewind, stop, eject the  
tape.  
Insert the video cassette into your DVD+VCR.  
The video cassette should have the window side  
facing up and the arrow facing away from you.  
2. Press  
1
to start playing your tape.  
CM (Commercial Message) Skip:  
If you load a video cassette which has had its record  
protection tab removed, playback of the cassette will  
start automatically.  
This feature enables you during playback of a tape to  
skip a commercial break in a few seconds, then resume  
normal playback.  
While tape is playing press  
skip commercial (or another programme material).  
on the remote control to  
AUTO TRACKING  
Your DVD+VCR will automatically adjust the tracking  
to give the best picture quality.  
Repeatedly press  
to skip:  
1 Press 30 seconds  
2 Press 60 seconds  
3 Press 90 seconds  
4 Press 120 seconds  
5 Press 150 seconds  
6 Press 180 seconds  
If noise bars appear during playback, adjust the  
tracking manually by pressing PR/TRK (+/-).  
3. Press ; to still a picture.  
Press  
;
repeatedly to advance the tape frame by frame.  
If you press 5, the picture will be slowed down at  
about 1/19 times the normal playback.  
Tapes can be paused for up to 5 minutes. After 5  
minutes your DVD+VCR will stop the tape to prevent  
damaging the tape or your DVD+VCR.  
Still picture quality can be improved slightly by using  
3 or 4.  
OPR (Optimum Picture Response)  
This feature automatically improves playback picture  
quality by adjusting your DVD+VCR to the condition of  
the tape. Please note that the OPR icon ( ) will only  
appear in play that mode when playing a tape.  
4. Press  
Double speed playback (SP mode only)  
Press the “ (X2)” button during normal playback. The  
tape will play back at double speed and without sound.  
Press the “ (X2)” button to return to playback at  
normal speed  
1
to continue playing your tape.  
1. Press i.  
2. Press 2 or 1 to select  
3. Press ENTER/OK.  
(OPR).  
1
1
4. Press 3 or 4 repeatedly to select: OFF, SOFT or  
SHARP.  
Picture search:  
5. Press i return to screen.  
During playing back press either 6 or 5 to this  
will enable you to rapidly wind the tape (7 times  
normal playback) see where you are on the tape.  
Notes:  
OFF  
When playing back tapes that have been over-  
recorded with new content, the original audio may be  
audible during auto tracking.  
SOFT  
Pr-12  
P
ACMS  
SET  
S
SHARP  
R
f
OSD  
ON  
OFF  
The image may be distorted during special playback  
in LP mode.  
20  
 
     
Operation with tape  
7. Press ; to avoid recording unwanted scenes.  
Press ; to continue recording.  
Instant Timer Recording  
Your DVD+VCR allows you to make recordings  
using a variety of simple methods:  
Tapes can be paused for up to 5 minutes; RECP will  
be displayed when a tape is paused. After 5 minutes  
your DVD+VCR will stop recording to prevent  
damaging the tape or your DVD+VCR.  
Instant Timer Recording start recording  
immediately for a set period of time or until the  
video cassette runs out.  
8. Press to end recording.  
Press EJECT (<).  
Your DVD+VCR incorporates Long Play (LP) which  
enables you to record up to twice the amount of  
time on a video cassette. For example an E-180 will  
record up to 180 minutes using Standard Play (SP);  
using LP you will be able to record up to 360  
minutes. Please note there will be a slight loss in  
picture and sound quality when using LP.  
Notes:  
If you do not wish to record on a tape (this can happen  
quite easily by accident!) remove the protection tab on  
the back edge of the video cassette.  
It is possible to record on a video cassette with the  
record protection tab removed by covering the hole  
with self adhesive tape.  
Remember you can record one programme while  
watching another by starting your instant recording,  
press TV/VCR to select TV mode and then selecting a  
different channel on your TV.  
1. Make sure that you have correctly connected your  
DVD+VCR as described earlier in this book.  
Press Í/I to turn on your DVD+VCR.  
2. Insert a video cassette with protection tab into your  
DVD+VCR.  
The video cassette should have the window side  
facing up and the arrow facing away from you.  
3. Press 3 or 4 to select the programme number  
you wish to record.  
You may also directly select programme number  
using the numbered buttons on the remote control.  
4. If you wish to record directly from the SCART or  
RCA jacks, repeatedly press AUX until the socket  
you wish to record from is displayed.  
AV 1 for recording from EURO AV1 SCART jacks on  
the rear of your unit.  
AV 2 for recording from EURO AV2 SCART jacks on  
the rear of your unit.  
AV 3 for recording from VIDEO IN and AUDIO IN  
(Left & Right) jacks on the front of your unit.  
5. Press  
if you wish to record in Long Play or  
Standard Play.  
SP will produce improved picture and sound quality,  
however LP will provide twice as much recording  
time as SP.  
6. Press REC (¥) on the remote to start recording.  
Press ¥ on your unit or press REC (¥) on the  
remote several times. Each successive press will  
increase the record time by 30 minutes until you  
reach a maximum of 9 hours.  
21  
 
 
Operation with tape  
5. Press 2 or 1 to select the settings that you wish to  
revise. (PR, DATE, TIME and SP).  
ShowView Programming  
ShowView greatly simplifies entering the date,  
channel, start and end times of a Timer Recording  
by simply entering a ShowView Code. ShowView  
Codes are published in most TV guide magazines;  
they can vary one to nine numbers in length.  
Press 3 or 4 to enter the correct information.  
PR  
DATE  
TIME  
PR-01 12  
10:11~11:55  
- -: - -~ - -: - -  
- -: - -~- - : - -  
- -: - -~- - : - -  
- -: - -~- - : - -  
- -: - -~- - : - -  
- -: - -~- - : - -  
SP  
SP  
SP  
SP  
SP  
SP  
SP  
- -  
- -  
- -  
- -  
- -  
- -  
- -  
- -  
- -  
- -  
- -  
- -  
SHOWVIEW is a registered trademark of Gemstar  
Development Corporation.  
i
The SHOWVIEW system is manufactured under  
license from Gemstar Development Corporation.  
6. Press 1 to select the recording speed.  
Press 3 or 4 to select the desired tape speed (SP,  
IP, or LP).  
1. Make sure that TV channels have been tuned and  
stored in correct SHOWVIEW order.  
Insert a video cassette with protection tab into your  
DVD+VCR.  
IP mode determines how much tape is left and  
switches speed from SP to LP, if necessary, to  
complete recording the program.  
Check that the timer event details are correct.  
If you wish to record from AUDIO IN and VIDEO IN  
on the front or from either of the EURO SCART  
sockets on the back of VCR, press AUX to select for  
correct display (AV1, AV2 or AV3).  
SHOWVIEW NO.  
- - - - - - - - -  
0~9, OK  
i
REC  
PR  
DATE  
TIME  
PR-01 12  
10:11~11:55  
- -: - -~ - -: - -  
- -: - -~- - : - -  
- -: - -~- - : - -  
- -: - -~- - : - -  
- -: - -~- - : - -  
- -: - -~- - : - -  
SP  
SP  
SP  
SP  
SP  
SP  
SP  
- -  
- -  
- -  
- -  
- -  
- -  
- -  
- -  
- -  
- -  
- -  
- -  
2. Press SHOWVIEW.  
3. Press the numbered buttons to enter the  
ShowView Code of the TV programme that you  
wish to record.  
i
If you make a mistake press 2 then enter the  
revised number.  
7. If you want to make another ShowView recording  
repeat stages 2 - 7.  
Press i twice.  
If PLEASE CHECK is displayed, you have entered  
incorrect information and will need to re-enter the  
data.  
SHOWVIEW NO.  
246876543  
Press Í/I to switch your DVD+VCR power off mode.  
will appear in the video recorder’s display while  
your VCR waits to make the recording.  
To watch a DVD during timer recording standby  
mode, press Í/I and DVD to switch to DVD mode.  
DELETE :  
0~9,  
OK  
i
REC  
4. Press ENTER/OK.  
If PLEASE CHECK is displayed it means that you  
have entered the wrong ShowView number, entered  
the ShowView number incorrectly.  
8. Press Í/I to end recording.  
If “- -” is displayed, you have to enter the programme  
number of the station, you want to record from.  
PR  
DATE  
TIME  
PR-01 12  
10:11~11:55  
- -: - -~ - -: - -  
- -: - -~- - : - -  
- -: - -~- - : - -  
- -: - -~- - : - -  
- -: - -~- - : - -  
- -: - -~- - : - -  
SP  
SP  
SP  
SP  
SP  
SP  
SP  
- -  
- -  
- -  
- -  
- -  
- -  
- -  
- -  
- -  
- -  
- -  
- -  
i
22  
 
 
Operation with tape  
5. Use the 3 or 4 to enter the date of the programme.  
Timer recording using On Screen  
Display  
If you press ENTER/OK before entering the date you  
may select one of the following automated recording  
features. Press 2 or 1 to select, then press  
ENTER/OK to confirm.  
DLY To record every day (except Saturday and  
Sunday) at the same time.  
You may set up to seven timer record events within  
one month of the current date.  
Note:  
SU~SA To record at the same time every week.  
Before setting the timer make sure that you have  
set the DVD+VCR clock correctly and you know  
which stations you have tuned TV stations on your  
DVD+VCR.  
PR  
DATE  
T
I
M
E
- -: - -~ - -: - -  
PR-03  
- -  
- -  
- -  
- -  
3
- -  
- -  
- -  
- -  
- -  
- -  
SP  
- -: - -~ - -: - - SP  
- -: - -~- - : - - SP  
- -: - -~- - : - - SP  
- -: - -~- - : - - SP  
- -: - -~- - : - - SP  
- -: - -~- - : - - SP  
- -  
- -  
DLY SU MO TU WE TH FR SA  
1. Insert a video cassette with protection tab into your  
DVD+VCR.  
i
OK  
The video cassette should have the window side  
facing up and the arrow facing away from you.  
6. Use 3/4/2/1buttons to enter the recording start  
and end times of the programme that you wish to  
record.  
2. Press i.  
Press 2 or 1 to select REC.  
Press ENTER/OK.  
Please note your DVD+VCR uses a 24 hour clock.  
e.g. 1pm will be displayed as 13:00.  
PR  
DATE  
- -  
- -  
- -  
- -  
- -  
- -  
- -  
T
I
M
E
PR  
PR-03  
- -  
- -  
- -  
- -  
- -  
- -  
DATE  
4
- -  
- -  
- -  
- -  
- -  
- -  
T I M E  
- -: - -~ - -: - -  
- -: - -~ - -: - -  
- -: - -~- - : - -  
- -: - -~- - : - -  
- -: - -~- - : - -  
- -: - -~- - : - -  
- -: - -~- - : - -  
- -  
- -  
- -  
- -  
- -  
- -  
- -  
SP  
SP  
SP  
SP  
SP  
SP  
SP  
14:00~ 15:30  
- -: - -~ - -: - -  
- -: - -~- - : - -  
- -: - -~- - : - -  
- -: - -~- - : - -  
- -: - -~- - : - -  
- -: - -~- - : - -  
SP  
SP  
SP  
SP  
SP  
SP  
SP  
OK  
i
,
DELETE:  
i
3. Press ENTER/OK to start setting the timer record  
7. Press 1 to select the recording speed.  
Press 3 or 4 to select the desired tape speed (SP,  
IP, or LP).  
event.  
4. Use the 3 or 4 to enter the station that you wish to  
record then press 1.  
IP mode determines how much tape is left and  
switches speed from SP to LP, if necessary, to  
complete recording the program.  
PR  
PR-03  
- -  
- -  
- -  
- -  
- -  
- -  
DATE  
- -  
- -  
- -  
- -  
- -  
- -  
- -  
T I M E  
- -: - -~ - -: - -  
- -: - -~ - -: - -  
- -: - -~- - : - -  
- -: - -~- - : - -  
- -: - -~- - : - -  
- -: - -~- - : - -  
- -: - -~- - : - -  
SP  
SP  
SP  
SP  
SP  
SP  
SP  
PR  
PR-03  
- -  
- -  
- -  
- -  
- -  
- -  
DATE  
4
- -  
- -  
- -  
- -  
- -  
- -  
T I M E  
14:00~ 15:30  
- -: - -~ - -: - -  
- -: - -~- - : - -  
- -: - -~- - : - -  
- -: - -~- - : - -  
- -: - -~- - : - -  
- -: - -~- - : - -  
SP  
SP  
SP  
SP  
SP  
SP  
SP  
i
i
Note:  
If all timer record events are full press 3 or 4 to select  
the event that you wish to remove and replace.  
Press 2 to delete the event.  
23  
 
   
Operation with tape  
Timer recording using On Screen  
Display (Continued)  
8. Press i to set another timer record event and follow  
steps 3 to 8.  
Check that the timer event details are correct.  
Press i return to screen.  
If PLEASE CHECK is displayed, you have entered  
incorrectly and will need to re-enter the data.  
9. Press Í/I to switch your DVD+VCR to Timer  
Standby mode.  
The timer symbol ( ) will appear in the display  
window while your DVD+VCR waits to make the  
recording.  
10. Press Í/I to end timer recording.  
Notes:  
The DVD+VCR will automatically power off when  
Timer Recording ends.  
During timer recording standby mode, the DVD and  
VCR mode cannot be operated. To use the  
DVD+VCR, press Í/I. After you use the DVD or VCR,  
press Í/I again to put the VCR into timer recording  
standby mode.  
If at a later date you wish to delete or change any of  
the settings in timer event memory you may do so  
without having to enter all the timer event information  
again. Simply display the timer event screen. Use 3  
or 4 to select the event that you wish to delete or  
change.  
Press 2 to delete the event...or  
Press ENTER/OK to change; then press 2 or 1 to  
select; Station, Date, Start and End times and  
recording speed. Press 3 or 4 to enter the correct  
information.  
• If Timer record events Overlap...  
Make sure that the preset times of the timer recording  
events do not overlap. If they do, the earlier  
programme will always be given priority.  
Example:  
Programme 1 is programmed to start at 16:00 and  
end at 17:00.  
Programme 2 is programmed to start at 16:30 and  
end at 17:30.  
(In this case, Programme 1 will be recorded in its  
entirety, but only the last 30 minutes of Programme 2  
will be recorded.)  
To watch a DVD while performing a timer recording,  
press TV/VCR to select VCR mode.  
24  
 
Additional Operation - VCR part  
Hi-Fi Stereo Sound System (NIC) On Screen Display (F.OSD)  
Your DVD+VCR will record and playback Hi-Fi stereo  
sound. In addition it has a stereo NICAM digital stereo  
sound decoder. This allows you to record and playback  
the sound in several different ways. Video cassettes  
recorded on your DVD+VCR will have a normal mono  
audio track and two VHS Hi-Fi stereo audio tracks.  
These stereo tracks allow you to make audio recordings  
in Hi-Fi stereo or bilingual mode from a TV broadcast,  
stereo audio system, video disc or another Hi-Fi VCR.  
You may easily display the current time or tape counter,  
amount of tape left, day, month, year, day of week,  
programme channel, tape speed and operational mode  
of your DVD+VCR on the TV screen. If a recording is  
taking place these On Screen Displays will not be  
recorded onto the tape.  
1. Press DISPLAY to display.  
Press DISPLAY repeatedly to cycle through the  
display options. The tape counter and amount of  
tape left will appear if there is a tape loaded.  
1. Your DVD+VCR’s NICAM digital sound decoder  
allows you to enjoy broadcasts with NICAM sound,  
as well as standard stereo, bilingual and mono  
sound. The particular type of sound received or that  
recorded will be briefly displayed on the TV screen  
for a couple of seconds:  
2. After 3 seconds the majority of the On Screen  
Displays will clear leaving only the clock or tape  
counter and the amount of tape left on the screen.  
Press DISPLAY again to remove all displays from  
the TV screen.  
STEREO NICAM  
Sound is automatically recorded on the Hi-Fi stereo  
and mono tracks of the video tape.  
Note:  
It cannot display when f.OSD is OFF.  
BIL NICAM  
Both audio channels will be recorded on the Hi-Fi  
stereo tracks. The primary language channel (left)  
will be recorded on the mono track of the video tape.  
Tape Counter Memory Stop  
The Digital Tape Counter can be displayed on the  
display window instead of the time by pressing  
DISPLAY on the remote control. The Digital Tape  
Counter indicates the relative positions of recordings on  
the tape.  
MONO  
The sound is recorded on the Hi-Fi tracks and the  
mono track of the video tape without any separation.  
2. Press AUDIO repeatedly until the desired audio  
1. Press DISPLAY.  
mode appears.  
Press CLEAR (  
) to set the counter to 0:00:00.  
3. The choice is STEREO, LEFT, RIGHT and MONO.  
In BIL NICAM playback the primary language is  
output on the left channel and the secondary  
channel is output simultaneously from the right  
channel when audio output is set to STEREO. The  
primary language will be output from both channels  
when the audio setting is MONO.  
Press 1 or start playback or recording.  
The tape counter will display the actual play time in  
hours, minutes and seconds.  
2. Press when playback or recording is complete.  
Press 6.  
The tape will rewind and automatically stop when the  
counter returns to 0:00:00.  
Please note that when adjusting the tracking control  
Hi-Fi stereo sound may revert to MONO.  
Note:  
Note:  
To rewind to the beginning of the tape, press 6 again.  
When OFF is selected in NIC, only mono sound will be  
output.  
25  
 
           
Additional Operation - VCR part  
Video Doctor (Self-Diagnosis)  
2. Press 3/4 repeatedly to select: AUTO, 4:3 or 16:9.  
AUTO:  
This feature informs you that there is a problem with your  
DVD+VCR. These error messages will appear on the TV  
screen.  
Automatically plays back Wide-Screen programmes  
as Wide-Screen and Normal programmes as  
normal.  
4:3:  
1. Press i.  
Only for playing back and recording Normal format  
recordings (4:3).  
16:9:  
Press 2 or 1 to select  
Press ENTER/OK.  
.
Only for playing back and recording Wide-Screen  
format recordings (16:9).  
ANTENNA CONNECT  
HEAD STATUS  
TAPE STATUS  
NO. OF TIMER PROGRAMME  
NEXT TIMER PROGRAMME  
1
2
Pr-12  
P
ACMS  
SET  
SET SYS  
R
f
PLEASE CHECK  
OSD  
ON  
OFF  
i
1
2
Pr-12  
P
A
SET  
S  
4:3  
16:9  
AUTO  
R
f
2. Press 3 or 4 to check a problem.  
OSD  
ON  
OFF  
i
ANTENNA CONNECT  
• PLEASE CHECK:  
Connect the aerial into the jack securely.  
3. Press i to remove the menus from the TV screen.  
To enjoy Wide-Screen playback you must connect  
your VCR to the TV using a SCART cable.  
HEAD STATUS  
• PLEASE CLEAN:  
Clean your video heads.  
To set the decoder  
TAPE STATUS  
• NOT RECORDABLE:  
Insert a tape with its protection tab in place  
We have already described, how to connect a decoder  
for pay-TV station as DECODER or PREMIERE on page  
10. For the recording of an encoded station you do not  
have to control anything. You just select the station and  
wait shortly until the decoding will start.  
NO. OF TIMER PROGRAMME  
• 2  
Shows the number of timer recording.  
1. Press i.  
NEXT TIMER PROGRAMME  
The main menu will appear on the TV screen.  
Press 2 or 1 to select the DECODER.  
Press ENTER/OK.  
• PR-01 26 10:00~11:00 SP  
Shows the current status of timer recording.  
3. Press i to remove the menus from the TV screen.  
2. Press 3 or 4 to select.  
ON: When the decoder is connected to the AV2  
socket.  
Wide Screen Compatibility 16:9  
OFF: When another VCR is connected to the AV2  
socket.  
Your DVD+VCR can record and play back wide screen  
aspect ratio programmes (16:9). To record a wide screen  
format programme successfully the correct type of wide  
screen signal must be broadcast by the TV station.  
1. Switch on your DVD+VCR.  
Press i.  
Press 2 or 1 to select  
Press ENTER/OK.  
.
1
2
1
2
Pr-12  
Pr-12  
P
P
A
ACMS  
SET  
S  
SET  
SET SYS  
AUTO  
R
R
f
4:3  
f
OSD  
ON  
OFF  
OSD  
ON  
16:9  
i
OFF  
26  
 
           
Additional Operation - VCR part  
Recording from External Components  
Copying from DVD to VCR  
You can record from an external component, such as a  
camcorder or VCR, connected to any of the DVD+VCR’s  
external inputs.  
You can copy the contents of a DVD to a VHS tape.  
1. Insert the disc you wish to copy into the DVD deck  
and close the disc tray.  
1. Make sure that the component you want to record  
from is connected properly to the DVD+VCR.  
2. Insert a blank VHS video tape into the VCR deck.  
3. Find the place on the DVD from which you want to  
2. Press AUX repeatedly to select the external input to  
record from.  
start dubbing using the  
functions.  
1, 6, 5 and ;  
AV 1 for recording from EURO AV1 SCART jacks on  
the rear of your unit.  
For best results, pause playback at the point from  
which you want to record.  
AV 2 for recording from EURO AV2 SCART jacks on  
the rear of your unit.  
AV 3 for recording from VIDEO IN and AUDIO IN  
(Left & Right) jacks on the front of your unit.  
4. Press ¥ on the Remote Control. The DVD goes into  
PLAY mode and the VCR goes into RECORD mode.  
If the DVD disc menu appears, you may need to  
press  
1
manually to begin copying.  
3. Load a recordable tape.  
5. When the DVD is finished playing, press to end  
4. Set a recording mode (SP or LP) as necessary by  
copying.  
pressing  
repeatedly.  
Notes:  
5. Play the tape or disc in the external component. If  
you have a TV attached to your DVD+VCR, you can  
see the video playing.  
If the DVD you are attempting to copy is copy protected, you  
will not be able to copy the disc. It is not permitted to copy  
Macrovision encoded DVDs (or Discs). “LOCK” is displayed  
in the display window.  
You must stop the copy process manually when the DVD  
movie ends, or the unit may replay and record over and over  
again.  
6. Press ¥ once to start recording.  
The REC indicator lights in the display window.  
7. Press to stop recording.  
When you stop the DVD playback during copying, the  
recording on VCR is stopped automatically.  
Notes:  
Before recording, confirm the recording start position.  
If your source is copy-protected using CopyGuard, you will  
not be able to record it using this unit. See Copyright on page  
2 for more details.  
To record for a fixed length of time, see One-touch Timer  
Recording.  
27  
 
   
Operation with DVD and Video CD  
Playback Setup  
General Features  
1. Turn on the TV and select the video input source  
connected to the DVD+VCR.  
Notes:  
Unless stated otherwise, all operations described use  
the remote control. Some features may also be available  
on the Setup menu.  
2. Turn on the audio system (if applicable) and select  
the input source connected to the DVD+VCR.  
3. Press OPEN/CLOSE (<) to open the disc tray and  
load your chosen disc in the tray, with the playback  
side down.  
DVD  
Moving to another TITLE  
When a disc has more than one title, you can move to  
another title. Press DISPLAY and select desired title by  
using number (0-9) or 2 / 1 then press ENTER/OK to  
move to another title.  
4. Press OPEN/CLOSE (<) to close the tray.  
Playback starts automatically. If playback does not  
start, press  
1.  
Moving to another CHAPTER / TRACK  
In some cases, the disc menu might appear instead.  
DVD  
VCD  
5. To stop the playback, press .  
The unit records the stopped point, depending on  
the disc. “;∫” appears on the screen briefly. Press  
When a title on a disc has more than one chapter or a  
disc has more than one track, you can move to another  
chapter/track as follows:  
1
to resume playback (from the scene point). If  
you press again or unload the disc (“” appears  
on the screen.), the unit will clear the stopped point.  
Press OPEN/CLOSE (<) to remove the disc.  
Press OPEN/CLOSE (<) to close disc tray or press  
Í/I, the disc tray closes automatically and unit turns  
off.  
Press 9 or : briefly during playback to select  
the next chapter/track or to return to the beginning of  
the current chapter/track.  
Press : twice in quick successions to step back to  
the previous chapter/track.  
To go directly to any chapter during DVD playback,  
press DISPLAY and press 3 / 4 to select the  
chapter/track icon. Input the chapter/track number (0-  
9) or use 2 / 1.  
If a menu screen is displayed  
The menu screen may be displayed first after loading a  
DVD or Video CD which offer a menu.  
Note:  
DVD  
On a Video CD with PBC, you must set PBC to Off on the  
setup menu to use this function (See “PBC” on page 18).  
Use the 2 1 3 4 buttons to select the title/chapter  
you want to view, then press ENTER/OK to start.  
Press TITLE or DISC MENU to return to the menu  
screen.  
DVD  
VCD  
Slow Motion  
1. Press 5 during still mode.  
VCD  
The DVD+VCR will now go into SLOW mode.  
Use the number buttons to select the track you want  
to view and press RETURN to return to the menu  
screen. Menu settings and operating procedures  
may differ. Follow the instructions on each menu  
screen. You also may set PBC to Off (See “PBC” on  
page 18).  
2. Use 5 to select the required speed:  
F 1/7, F 1/6, F 1/4, or F 1/2 (forward).  
3. To exit Slow Motion mode, press  
1.  
Note:  
Slow motion playback in reverse is not possible.  
Notes:  
If parental control is set and the disc is not within the rating  
settings you must input the password.  
(See “LOCK” on page 19).  
DVDs may have a region code. Your player will not play discs  
that have a region code different from your player. The region  
code for this player is 2 (two).  
In some cases, playback of discs recorded in the NTSC  
system may be jerky.  
28  
 
     
Operation with DVD and Video CD  
DVD  
VCD  
Still Picture and Frame-by-Frame Playback  
Repeat  
DVD  
VCD  
You can repeat a title/chapter/all/track on a disc.  
Press REPEAT during playback to select a desired  
repeat mode.  
1. Press ; during playback. Advance the picture  
frame-by-frame by pressing ; repeatedly.  
DVD Video Discs - Repeat Chapter/Title/Off  
Chapter: repeats the current chapter.  
Title: repeats the current title.  
2. To exit still motion mode, press  
1.  
DVD  
VCD  
Search  
1. Press 6 or 5 during playback.  
Off: does not play repeatedly.  
Video CDs - Repeat Track/All/Off  
Track: repeats the current track  
All: repeats all the tracks on a disc.  
Off: does not play repeatedly.  
2. Press 6 or 5 repeatedly to select the required  
speed:  
DVD disc; X2, X4, X16 or X100  
Video CD; X2, X4, X8  
Note:  
3. To exit SEARCH mode, press  
1.  
On a Video CD with PBC, you must set PBC to Off on the  
setup menu to use this function (See “PBC” on page 18).  
If you press 9 once during Repeat Chapter (Track)  
playback, the repeat playback cancels.  
DVD  
VCD  
Time Search  
To start playing at any chosen time on the disc:  
1. Press DISPLAY during playback. The time search  
box shows the elapsed playing time.  
DVD  
VCD  
Repeat A-B  
To repeat a sequence.  
2. Press 3/4 to select the time clock icon and  
1. Press REPEAT A-B at your chosen starting point.  
“A- ” appears briefly on the TV screen.  
“ -:--:-- ” appears.  
3. Input the required start time in hours, minutes, and  
seconds from left to right. If you enter the wrong  
2. Press REPEAT A-B again at your chosen end point.  
“A- B” appears briefly on the TV screen and the  
repeat sequence begins.  
numbers, press CLEAR (  
) to remove the  
numbers you entered. Then input the correct  
numbers.  
3. Press REPEAT A-B again to cancel.  
4. Press ENTER/OK to confirm. Playback starts from  
the selected time.  
DVD  
VCD  
Zoom  
Use zoom to enlarge the video image.  
Note:  
1. Press ZOOM during playback or still playback to  
activate the Zoom function. The square frame  
appears briefly in the right bottom of the picture.  
On a Video CD with PBC, you must set PBC to Off on the setup  
menu to use this function (See “PBC” on page 18).  
DVD  
VCD  
Marker Search  
To enter a Marker  
2. Each press of the ZOOM button changes the TV  
screen in the sequence:  
#5 1/9  
You can start playback from up to nine memorized points.  
To enter a marker, press MARKER at the desired point  
on the disc. The Marker icon appears on the TV screen  
briefly. Repeat to enter up to nine markers.  
100% size 150% size 200% size 300% size  
400% size 100% size.  
3. Use the 2 134 buttons to move through the  
zoomed picture.  
1
2
3
-
-
-
-
-
-
To Recall or Clear a Marked Scene  
4. To resume normal playback, press ZOOM  
repeatedly or CLEAR (  
) button.  
1. During disc playback, press SEARCH. The marker  
search menu appears on the screen.  
Note:  
Zoom may not work on some DVDs.  
2. Within 10 seconds, press 2/1 to select a marker  
number that you want to recall or clear.  
3. Press ENTER/OK and playback starts from the  
marked scene. Or, Press CLEAR (  
) and the  
marker number is erased from the list.  
4. You can play any marker by inputting its number on  
the marker search menu.  
29  
 
 
Operation with DVD and Video CD  
VCD  
Changing the Audio Channel  
Special DVD Features  
Press AUDIO repeatedly during playback to hear a  
different audio channel (Stereo, Left, Right).  
Checking the contents of DVD discs: Menus  
DVDs may offer menus that allow you to access special  
features. To use the disc menu, press DISC MENU.  
Input the corresponding number or use the 2 134  
buttons to highlight your selection.  
DVD  
CD  
VCD  
Last Scene Memory  
This player memorizes last scene from the last disc that  
is viewed. The last scene remains in memory even if you  
remove the disc from the player or switch off the player.  
If you load a disc that has the scene memorized, the  
scene is automatically recalled.  
Then press ENTER/OK.  
DVD  
Title Menu  
1. Press TITLE. If the current title has a menu, the  
menu appears on the screen. Otherwise, the disc  
menu may appear.  
Note:  
This player does not memorize the scene of a disc if you switch  
off the player before commencing to play the disc.  
2. The menu offers features such as camera angles,  
spoken language and subtitle options, and chapters  
for the title.  
DVD  
Instant Replay  
Press AUX during playback and the disc will reverse  
picture search through 10 seconds of playback. And then  
the playback will start from the point again.  
3. Press TITLE to exit.  
DVD  
Disc Menu  
Screen Saver  
The screen saver appears when you leave the  
DVD+VCR in Stop mode for about five minutes.  
Press DISC MENU and the disc menu is displayed.  
Press DISC MENU again to exit.  
DVD  
Camera Angle  
If the disc contains scenes recorded at different camera  
angles, you can change to a different camera angle  
during playback. Press ANGLE repeatedly during  
playback to select a desired angle. Note that the number  
of the current angle appears on the display.  
Tip:  
The Camera Angle icon is displayed on the TV screen when  
alternate angles are available.  
DVD  
Changing the Audio Language  
Press A.MONITOR repeatedly during playback to hear a  
different audio language or audio track.  
DVD  
Subtitles  
Press SUBTITLE repeatedly during playback to see the  
different subtitle languages.  
Note:  
If there is no information,  
is displayed.  
30  
 
 
Operation with Audio CD and MP3 Disc  
On-Screen Display - DVD  
Maintenance and Service  
You can display the general playback status on the TV  
screen. Some items can be changed using the menu.  
To use the on-screen display:  
Refer to the information in this chapter before contacting  
a service technician.  
Handling the Unit  
1. Press DISPLAY during playback.  
2. Press 3 / 4 to select an item.  
When shipping the unit  
The selected item is highlighted.  
Please save the original shipping carton and packing  
materials. If you need to ship the unit, for maximum  
protection, re-pack the unit as it was originally packed at  
the factory.  
3. Press 2 / 1 to change the setting. You can also use  
the number buttons if appropriate (e.g. inputting the  
title number). For some functions, press ENTER/OK  
to execute the setting.  
Keeping the exterior surfaces clean  
Do not use volatile liquids such as insecticide spray  
near the unit.  
Do not leave rubber or plastic products in contact with  
the unit for a long period of time. since they leave  
marks on the surface.  
Notes:  
Some discs may not provide all of the features shown below.  
If no button is pressed for 10 seconds, the on-screen display  
disappears.  
If  
is displayed, action prohibited or not available.  
Example: On-Screen Display during playing  
DVD Video  
Cleaning the unit  
To clean the player, use a soft, dry cloth. If the surfaces  
are extremely dirty, use a soft cloth lightly moistened with  
a mild detergent solution.  
Items  
Selection Method  
2 / 1, Numbers  
ENTER/OK  
1 / 1  
1 / 18  
-:--:--  
Title Number  
Do not use strong solvents such as alcohol, benzine, or  
thinner, as these might damage the surface of the unit.  
2 / 1, Numbers  
ENTER/OK  
Chapter Number  
Time search  
Maintaining the Unit  
Numbers  
ENTER/OK  
The DVD+VCR is a high-tech, precision device. If the  
optical pick-up lens and disc drive parts are dirty or worn,  
the picture quality could be diminished.  
Example: On-Screen Display during playing  
VCD  
Depending on the operating environment, regular  
inspection and maintenance are recommended after  
every 1,000 hours of use.  
Items  
Selection Method  
For details, please contact your nearest authorized  
service center.  
Track Number  
(or PBC mode)  
2 / 1, Numbers  
ENTER/OK  
1 / 1  
Numbers  
ENTER/OK  
Time search  
-:--:--  
31  
 
 
Playing an Audio CD or MP3 Disc  
The DVD+VCR can play MP3 formatted recordings on  
CD-ROM, CD-R, or CD-RW discs.  
MP3 disc compatibility with this player is limited  
as follows:  
Sampling frequency: within 8 - 48 kHz  
Bit rate: within 32 - 320kbps  
The player cannot read an MP3 file that has a file  
extension other than “.mp3”.  
CD-R physical format should be ISO 9660  
If you record MP3 files using software that cannot  
create a file system (eg. Direct-CD) it is impossible  
to playback MP3 files. We recommend that you use  
Easy-CD Creator, which creates an ISO 9660 file  
system.  
Audio CD  
Once you insert an audio CD a menu appears on the TV  
screen. Press 3 / 4 to select a track then press  
ENTER/OK and playback starts.  
1
or  
AUDIO CD  
0:52:07  
1 / 12  
List  
Program  
Track1  
Track2  
Track3  
Track4  
Track5  
File names should have a maximum of 8 letters  
and must incorporate an .mp3 extension.  
They should not contain special letters such as / ?  
* : “ < > l etc.  
Track6  
Track7  
Track8  
Clear All  
PROGRAM Edit  
The total number of contens on the disc should be  
less than 1500 files and 300 folders.  
MP3  
1. Press 3 / 4 to select a folder, and press ENTER/  
This DVD player requires discs and recordings to  
meet certain technical standards in order to achieve  
optimal playback quality. Pre-recorded DVDs are  
automatically set to these standards. There are many  
different types of recordable disc formats (including  
CD-R containing MP3 or WMA files) and these  
require certain pre-existing conditions (see above) to  
ensure compatible playback.  
OK to see the folder contents.  
2. Press 3 / 4 to select a track then press  
1
or  
ENTER/OK. Playback starts.  
MUSIC  
0:00:00  
1 / 12  
List  
Program  
1-Music1  
2-Music2  
3-Music3  
4-Music4  
5-Music5  
6-Music6  
7-Music7  
Customers should note that permission is  
required in order to download MP3 / WMA files  
and music from the Internet. Our company has no  
right to grant such permission. Permission  
should always be sought from the copyright  
owner.  
Clear All  
DISPLAY Info  
PROGRAM Edit  
ID3 TAG  
When playing a file containing information such as  
track titles, you can see the information by pressing  
DISPLAY. [ Song, Artist, Album, Comment, Genre ]  
If there is no information, “No ID3 TAG” appear on the  
menu screen.  
Tips:  
If you are in a file list on the “MUSIC” menu and want to  
return to the Folder list, use the 3 / 4 to highlight  
and  
press ENTER/OK.  
To go directly to any track, input the track number (0-9).  
On a CD with MP3 and JPEG you can switch MP3 and  
JPEG. Press TITLE and “MUSIC” or “PHOTO” word on top of  
the menu is highlighted.  
32  
 
 
Playing an Audio CD or MP3 Disc  
Audio CD and MP3 Disc Features  
CD  
MP3  
Random  
1. Press RANDOM during playback. Random Playback  
begins immediately and “Random” appears on the  
menu screen.  
CD  
MP3  
Pause  
1. Press ; during playback.  
2. To return to normal playback, press RANDOM  
repeatedly until “Random” disappears from the  
menu screen.  
2. To return to playback, press  
1
or press ; again.  
CD  
MP3  
Moving to another Track  
1. Press 9 or : briefly during playback to go to  
the next track or to return to the beginning of the  
current track.  
Tip:  
By pressing 9 or : during random playback, the unit  
selects another track and resumes random playback.  
2. Press : twice in quick successions to go back to  
CD  
the previous track.  
Repeat A-B  
1. To repeat a sequence during disc playback press  
REPEAT A-B at your chosen starting point. The  
Repeat icon and “A -” appear on the menu screen.  
3. You can play any track by inputting its number.  
CD  
MP3  
Repeat Track / All / Off  
You can play a track/all on a disc.  
2. Press REPEAT A-B again at your chosen end point.  
The Repeat icon and “A-B” appear on the menu  
screen, and the sequence begins to play repeatedly.  
1. Press REPEAT when playing a disc. The repeat icon  
appears.  
3. To exit the sequence and return to normal play,  
press REPEAT A-B again. The Repeat icon  
disappears from the menu screen.  
2. Press REPEAT to select a desired repeat mode.  
Track: repeats the current track.  
All: repeats all the tracks on a disc.  
Off (No display): does not play repeatedly.  
Note:  
If you press 9 once during Repeat Track playback, the repeat  
playback will be cancelled.  
CD  
MP3  
Search  
1. Press 6 or 5 during playback.  
2. Press 6 or 5 repeatedly to select the required  
speed:  
X2, X4 and X8 backward or forward.  
3. To exit SEARCH mode, press  
1.  
33  
 
 
Playing an Audio CD or MP3 Disc  
Programmed Playback  
Repeat Programmed Tracks  
1. Press REPEAT when playing a disc. The repeat icon  
appears.  
The program function enables you to store your favourite  
tracks from any disc in the player memory.  
A program can contain 30 tracks.  
2. Press REPEAT to select a desired repeat mode.  
Track: repeats the current track  
All: repeats all the tracks on programmed list.  
Off (No display): does not play repeatedly.  
1. Insert a disc.  
AUDIO CD or MUSIC menu appears.  
2. Press MNL.PROG.  
Note:  
The E mark will appear to the right of the word  
“Program” on the right side of the menu screen.  
If you press 9 once during Repeat Track playback, the repeat  
playback will be cancelled.  
AUDIO CD  
0:52:07  
6 / 16  
Erasing a Track from “Program” List  
List  
E
Program  
01-TRACK01  
02-TRACK02  
1. During STOP mode, press MNL.PROG. and E mark  
will appear.  
01-TRACK01  
02-TRACK02  
03-TRACK03  
04-TRACK04  
05-TRACK05  
06-TRACK06  
07-TRACK07  
08-TRACK08  
03-TRACK04  
04-TRACK06  
2. Use 1 / 3 / 4 to select the track that you wish to  
erase from the Program list.  
Clear All  
3. Press CLEAR (  
).  
PROGRAM Edit  
Repeat to erase additional tracks on the list.  
Audio CD Program Menu  
Erasing the Complete Program List  
1. During STOP mode, press MNL.PROG. and E mark  
will appear.  
MUSIC  
0:00:00  
4 / 4  
List  
Program  
03 File 03  
E
03 File 03  
04 File 04  
05 File 05  
06 File 06  
07 File 07  
08 File 08  
09 File 09  
10 File 10  
06 File 06  
08 File 08  
10 File 10  
2. Use 1 / 3 / 4 to select “Clear All” in the “Program”  
list, then press ENTER/OK.  
Note:  
Clear All  
The programs are also cleared when the disc is removed.  
MP3  
PROGRAM Edit  
DISPLAY Info  
MP3 Program Menu  
Note:  
Press MNL.PROG. again, the E mark will disappear to exit  
the Program Edit mode.  
3. Select a track on the “List”, then press ENTER/OK to  
place the selected track on the “Program” list.  
Repeat to place additional tracks on the list.  
4. Press 1.  
Select the track you want to start playing in the  
“Program” list.  
5. Press  
1
or ENTER/OK to start. Playback begins in  
the order in which you programmed the tracks.  
Playback stops after all of the tracks on the  
“Program” list have played once.  
6. To resume normal playback from programmed  
playback, select a track of AUDIO CD (or MUSIC) list  
and then press  
1
or ENTER/OK.  
Note:  
When you play the programmed track, the E mark will disappear  
then the program edit mode will disable.  
34  
 
 
Viewing a JPEG Disc  
JPEG  
Using this DVD+VCR you can view discs with JPEG files.  
Slide Show  
Use 342 1 to highlight the  
press ENTER/OK.  
(Slide Show) then  
1. Insert a disc and close the tray. The PHOTO menu  
appears on the TV screen.  
PHOTO  
JPEG  
Still Picture  
List  
Preview  
1. Press ; during slide show.  
Folder 00  
Folder 01  
Folder 02  
Folder 03  
Folder 04  
The player will now go into PAUSE mode.  
>>>  
2. To return to the slide show, press  
again.  
1
or press ;  
01 FILE 01  
02 FILE 02  
03 FILE 03  
JPEG  
Moving to another File  
/FILE 01  
Press 9 or : or cursor (2 or 1) once while  
viewing a picture to advance to the next or previous file.  
2. Press 3 / 4 to select a folder, and press ENTER/  
OK. A list of files in the folder appears. If you are in a  
file list and want to return to the previous Folder list,  
use the 3 / 4 buttons on the remote to highlight  
and press ENTER/OK.  
JPEG  
Zoom  
Use zoom to enlarge the photo image. (see page 29)  
JPEG  
3. If you want to view a particular file, press 3 / 4 to  
To rotate picture  
highlight a file and press ENTER/OK or  
1.  
Press 3 / 4 during showing a picture to rotate the  
picture clockwise or counter clockwise.  
The selected file will appear for viewing.  
The on-screen messages displayed with the file can  
be turned off by pressing the RETURN (Hide) button  
on the remote control.  
While viewing a file, you can press to move to the  
previous menu (PHOTO menu).  
JPEG disc compatibility with this player is  
limited as follows:  
Depending upon the size and number of JPEG  
files, it could take a long time for the DVD+VCR to  
read the disc’s contents. If you don’t see an on-  
screen display after several minutes, some of the  
files may be too large — reduce the resolution of  
the JPEG files to less than 5760 (Horizontal) x  
4608 (Vertical) pixels and burn another disc.  
The total number of contens on the disc should be  
less than 1500 files and 300 folders.  
Some discs may be incompatible due to a different  
recording format or the condition of disc.  
Ensure that all the selected files have the “.jpg”  
extensions when copying into the CD layout.  
If the files have “.jpe” or “.jpeg” extensions, please  
rename them as “.jpg” file.  
Tips:  
Information and user guidance regarding the current image  
is displayed in the lower part of the screen. You can toggle  
this bar on and off using RETURN.  
There are three Slide Speed options  
:
>>> (Fast), >> (Normal) and > (Slow)  
Use 342 1 to highlight the Speed. Then, use 2 / 1 to  
select the option you want to use then press ENTER/OK.  
On a disc with MP3 and JPEG you can switch MP3 and  
JPEG. Press TITLE and MUSIC or PHOTO word on top of  
the menu is highlighted.  
File names without “.jpg” extension will not be able  
to be read by this DVD+VCR. Even though the files  
are shown as JPEG image files in Windows  
Explorer.  
35  
 
 
Language and Area Code List  
Language Code List  
Use this list to input your desired language for the following initial settings: Disc Audio, Disc Subtitle, Disc Menu.  
Language  
Abkhazian  
Afar  
Afrikaans  
Albanian  
Ameharic  
Arabic  
Armenian  
Assamese  
Aymara  
Azerbaijani  
Bashkir  
Basque  
Bengali; Bangla  
Bhutani  
Bihari  
Breton  
Bulgarian  
Burmese  
Byelorussian  
Cambodian  
Catalan  
Chinese  
Corsican  
Croatian  
Czech  
Code  
6566  
6565  
6570  
8381  
6577  
6582  
7289  
6583  
6588  
6590  
6665  
6985  
6678  
6890  
6672  
6682  
6671  
7789  
6669  
7577  
6765  
9072  
6779  
7282  
6783  
6865  
7876  
6978  
6979  
6984  
7079  
Language  
Fiji  
Finnish  
French  
Frisian  
Galician  
Georgian  
German  
Greek  
Greenlandic  
Guarani  
Gujarati  
Hausa  
Code  
7074  
7073  
7082  
7089  
7176  
7565  
6869  
6976  
7576  
7178  
7185  
7265  
7387  
7273  
7285  
7383  
7378  
7365  
7165  
7384  
7465  
7487  
7578  
7583  
7575  
7589  
7579  
7585  
7679  
7665  
7686  
Language  
Lingala  
Lithuanian  
Macedonian  
Malagasy  
Malay  
Malayalam  
Maltese  
Maori  
Code  
7678  
7684  
7775  
7771  
7783  
7776  
7784  
7773  
7782  
7779  
7778  
7865  
7869  
7879  
7982  
8065  
8083  
7065  
8076  
8084  
8185  
8277  
8279  
8285  
8377  
8365  
7168  
8382  
8372  
8378  
8368  
Language  
Singhalese  
Slovak  
Slovenian  
Somali  
Spanish  
Sudanese  
Swahili  
Swedish  
Tagalog  
Tajik  
Code  
8373  
8375  
8376  
8379  
6983  
8385  
8387  
8386  
8476  
8471  
8465  
8484  
8469  
8472  
6679  
8473  
8479  
8482  
8475  
8487  
8575  
8582  
8590  
8673  
8679  
6789  
8779  
8872  
7473  
8979  
9085  
Marathi  
Moldavian  
Mongolian  
Nauru  
Nepali  
Norwegian  
Oriya  
Panjabi  
Pashto, Pushto  
Persian  
Tamil  
Tatar  
Hebrew  
Hindi  
Telugu  
Thai  
Tibetan  
Tigrinya  
Tonga  
Turkish  
Turkmen  
Twi  
Ukrainian  
Urdu  
Hungarian  
Icelandic  
Indonesian  
Interlingua  
Irish  
Polish  
Italian  
Portuguese  
Quechua  
Rhaeto-Romance  
Rumanian  
Russian  
Samoan  
Sanskrit  
Scots Gaelic  
Serbian  
Japanese  
Javanese  
Kannada  
Kashmiri  
Kazakh  
Kirghiz  
Uzbek  
Vietnamese  
Volapük  
Welsh  
Wolof  
Xhosa  
Yiddish  
Yoruba  
Zulu  
Danish  
Dutch  
English  
Esperanto  
Estonian  
Faroese  
Korean  
Kurdish  
Laothian  
Latin  
Serbo-Croatian  
Shona  
Sindhi  
Latvian, Lettish  
Area Code List  
Choose a area code from this list.  
Area  
Code  
AF  
AR  
AU  
AT  
Area  
Ethiopia  
Fiji  
Code  
ET  
FJ  
Area  
Code  
MY  
MV  
MX  
MC  
MN  
MA  
NP  
NL  
AN  
NZ  
NG  
NO  
OM  
PK  
Area  
Saudi Arabia  
Senegal  
Singapore  
Slovak Republic  
Slovenia  
South Africa  
South Korea  
Spain  
Sri Lanka  
Sweden  
Switzerland  
Taiwan  
Thailand  
Turkey  
Code  
SA  
SN  
SG  
SK  
SI  
Afghanistan  
Argentina  
Australia  
Austria  
Belgium  
Bhutan  
Bolivia  
Brazil  
Cambodia  
Canada  
Chile  
China  
Colombia  
Congo  
Costa Rica  
Croatia  
Czech Republic  
Denmark  
Ecuador  
Egypt  
Malaysia  
Maldives  
Mexico  
Finland  
France  
Germany  
Great Britain  
Greece  
Greenland  
Islands  
Hong Kong  
Hungary  
India  
Indonesia  
Israel  
Italy  
Jamaica  
Japan  
Kenya  
FI  
FR  
DE  
GB  
GR  
GL  
HM  
HK  
HU  
IN  
ID  
IL  
IT  
JM  
JP  
Monaco  
BE  
BT  
Mongolia  
Morocco  
Nepal  
Netherlands  
Netherlands Antilles  
New Zealand  
Nigeria  
ZA  
BO  
BR  
KH  
CA  
CL  
CN  
CO  
CG  
CR  
HR  
CZ  
DK  
EC  
EG  
SV  
KR  
ES  
LK  
SE  
CH  
TW  
TH  
TR  
UG  
UA  
US  
UY  
UZ  
VN  
ZW  
Norway  
Oman  
Pakistan  
Panama  
Paraguay  
Philippines  
Poland  
Portugal  
Romania  
Russian Federation  
PA  
Uganda  
Ukraine  
United States  
Uruguay  
Uzbekistan  
Vietnam  
PY  
PH  
PL  
PT  
RO  
RU  
KE  
KW  
LY  
Kuwait  
Libya  
Luxembourg  
El Salvador  
LU  
Zimbabwe  
36  
 
         
Troubleshooting  
Check the following guide for the possible cause of a problem before contacting service.  
Symptom  
No power.  
Cause  
Correction  
The power cord is disconnected.  
Plug the power cord into the wall outlet  
securely.  
The power is on, but the DVD or VCR button is not switched  
Refer to page 5.  
DVD+VCR does not  
properly.  
work.  
No disc is inserted.  
No tape is inserted.  
Insert a disc or tape. (Check that the  
disc or tape indicator in the display  
window is lit.)  
No picture.  
The TV is not set to receive DVD+VCR  
signal output.  
Select the appropriate video input  
mode on the TV so the picture from the  
DVD+VCR player appears on the TV  
screen.  
The video cable is not connected securely. Connect the video cable into the jacks  
securely.  
Mismatch setting between TV and this  
Select the correct Video Output in  
unit.  
SETUP menu.  
Wrong connection.  
Check the connection.  
No sound.  
The equipment connected with the audio  
cable is not set to receive DVD+VCR  
signal output.  
Select the correct input mode of the  
audio receiver so you can listen to the  
sound from the DVD+VCR.  
The audio cables are not connected  
Connect the audio cable into the jacks  
securely.  
securely.  
The power of the equipment connected  
Turn on the equipment connected with  
with the audio cable is turned off.  
the audio cable.  
The AUDIO options are set to the wrong  
Set the AUDIO options to the correct  
position.  
position.  
The playback picture is  
poor.  
The disc is dirty.  
Clean the disc.  
The TV channels are not tuned in  
Check tuning, carry out tuning again.  
properly.  
Tape heads are dirty.  
Clean video heads.  
Tape is a rental or was recorded on  
another VCR.  
Use PR/TRK (3/4) for manual  
tracking adjustment while tape is  
playing.  
37  
 
 
Troubleshooting (Continued)  
Symptom  
Cause  
Correction  
The DVD+VCR does not An unplayable disc is inserted.  
Insert a playable disc. (Check the disc  
start playback.  
type and Regional code.)  
The disc is placed upside down.  
Place the disc with the playback side  
down.  
The disc is not placed within the guide.  
Place the disc on the disc tray correctly  
inside the guide.  
The disc is dirty.  
Clean the disc.  
The Rating level is set.  
Cancel the Rating function or change  
the rating level.  
Video tape cannot be  
inserted.  
Is the cassette compartment empty?  
Audio mode is not set properly.  
NICAM mode is not set properly.  
Eject the tape in.  
No Hi-Fi sound  
Select STEREO by repeatedly pressing  
AUDIO on the remote control.  
No NICAM sound  
recording  
Make sure NICAM in the menu is set to  
AUTO for the station to be recorded.  
The remote control does There is an obstacle in the path of the  
Remove the obstacle.  
not work properly.  
remote control and this unit.  
The batteries in the remote control are  
Replace the batteries with new ones.  
exhausted.  
The remote control is not pointed at the  
Point the remote control at the remote  
remote sensor of the DVD+VCR.  
sensor of the DVD+VCR.  
The remote control is too far from the  
Operate the remote control within 23ft  
DVD+VCR.  
(7 m).  
This remote control use the same buttons When using a VCR, first press the VCR  
for VCR and DVD functions (ex.PLAY).  
button. When using a DVD, first press  
the DVD button.  
Timer recording is not  
possible.  
Clock in DVD+VCR is not set to correct  
time.  
Set clock to correct time.  
Reprogram Timer.  
Timer has been programmed incorrectly.  
indicator light does not appear after  
programming timer.  
Reprogram Timer and turn DVD+VCR  
off to enable timer.  
38  
 
Specification  
General  
Power requirements  
Power consumption  
Dimensions (approx.)  
Mass (approx.)  
AC 200-240 V, 50 Hz  
17 W  
430 X 78.5 X 265 mm (w/h/d)  
4.2 kg  
Operating temperature  
Operating humidity  
Timer  
5°C to 35°C (41°F to 95°F)  
5 % to 90 %  
24 hours display type  
UHF 22-68 (Adjustable)  
RF Modulator  
System  
Laser  
Semiconductor laser, wavelength 650 nm  
Double azimuth 6 heads, helical scanning.  
PAL  
DVD (PCM 96 kHz): 8 Hz to 44 kHz  
DVD (PCM 48 kHz): 8 Hz to 22 kHz  
CD: 8 Hz to 20 kHz  
Video Head system  
Signal system  
Frequency response  
Signal-to-noise ratio  
Harmonic distortion  
Dynamic range  
More than 100 dB (ANALOG OUT connectors only)  
Less than 0.008%  
More than 100 dB (DVD)  
More than 95 dB (CD)  
Inputs (VCR)  
Audio  
-6.0 dBm, more than 10 kohms (SCART)  
-6.0 dBm, more than 47 kohms (RCA)  
Video  
1.0 V (p-p), 75 ohms, unbalanced (SCART/RCA)  
Outputs (DVD)  
VIDEO OUT  
1 Vp-p 75 ohms, sync negative  
Audio output (digital audio)  
Audio output (analog audio)  
0.5 V (p-p), 75 ohms, RCA jack x 1  
2.0 Vrms (1 kHz, 0 dB), 600 ohms, RCA jack (L, R) x 1/SCART (TO TV)  
Outputs (VCR/DVD)  
Audio  
Video  
-6.0 dBm, less than 1 kohms (SCART)  
1.0 V (p-p), 75 ohms, unbalanced (SCART)  
Designs and specifications are subject to change without notice.  
Manufactured under license from Dolby Laboratories. “Dolby”, “Pro Logic” and the double-D symbol are trademarks of Dolby  
Laboratories.  
DTS and DTS Digital Out are trademarks of Digital Theater Systems, Inc.  
39  
 
 
EN  
Printed in Indonesia  
0305MNH-AL-OT  
EZ  
© 2005 Victor Company of Japan, Limited  
 

Indesit Washer iwsne61253 User Manual
InFocus Network Card U630 User Manual
Jensen Stereo Amplifier A222HLX User Manual
JVC Blu ray Player XV BP1 User Manual
JVC CRT Television AV 20F476 User Manual
Kenmore Planer 15333616 User Manual
Kenmore Refrigerator 103311849 User Manual
Kenwood Car Speaker KFC W210 User Manual
Kenwood MiniDisc Player DM VH7 User Manual
King Canada Dust Collector KC 3105C User Manual