JVC Webcam VN SE400U User Manual

External Device Controller Package  
User’s Guide  
VN-SE400U  
<Precautions>  
It is strictly prohibited to duplicate any part or the whole of this manual.  
The contents of this manual may be subject to change without notice.  
Take care not to violate the copyright of other persons.  
JVC will not assume liabilities for damages incurred as a result of any error that occurs in this document.  
V2.0.0  
 
1. TK-C655 Series Controller  
TK-S576 Series Controller controls the following models.  
TK-C655E  
TK-C676E  
< Position tab >  
Position Selecting Box  
Position Shift button (forward)  
Position Shift button (rewind)  
[Position Memory]  
Clicking on one of the buttons points the camera to the  
previously registered position. Click on the Save tab for  
registering positions.Up to 8 positions can be registered  
in the memory.  
[PAN/TILT Adjustment buttons]  
Arrow buttons are provided to control the pan/tilt posi-  
tion of the camera.  
The camera position is returned to the home position by  
[HOME] button.  
[SPEED] (For PAN/TILT Adjustment)  
Set the speed of the panning/tilting.  
Position Memory  
(1 is the slowest setting, and 8 is the fastest setting.)  
PAN/TILT Adfustment buttons  
[AUTO PAN]  
[IRIS]  
The camera stars to pan itself automatically by click.  
Adjust the camera iris.  
CLOSE: Close the iris.  
OPEN: Open the iris.  
[Position Selecting Box]  
Select one position to make the camera to point to the  
previously registered position. (From POS1 to POS99,  
or HOME)  
[FOCUS]  
Adjust the focusing.  
NEAR: Focus on the near subjects.  
FAR: Focus on the far subjects.  
AUTO FOCUS: Adjust the focusing automatically.  
[Position Shift button (forward)]  
Used to set the number of registered position forward  
per click, and the camera position is adjusted as the  
position.(The position number unregistered any position  
is skipped.)  
[ZOOM]  
Adjust the zoom ratio.  
WIDE: Wide angle  
TELE: Tele angle  
The display of the Position Selecting box does not  
change if the position is changed by this button.  
[Position Shift button (rewind)]  
[SPEED] (For ZOOM and FOCUS)  
Used to rewind the number of registered position per  
click, and the camera position is adjusted as the  
position.(The position number unregistered any position  
is skipped.)  
Set the speed of FOCUS and ZOOM.  
(1 is the slowest setting, and 4 is the fastest setting.)  
The display of the Position Selecting box does not  
change if the position is changed by this button.  
3
 
 
< Save tab >  
[SAVE]  
Click [SAVE] to register the desired position.  
[CLEAR]  
Click [Clear] to clear the registered position.  
< Menu tab >  
[MENU]  
Opens the Setup menu.  
Use to close the Setup menu or to return to the main menu  
from the sub menu.  
[SET]  
Use to display the sub menu or to approve the settings.  
[PAN/TILT Adjustment buttons]  
Use to move the cursor and to set the menu.  
< Option tab >  
[B&W MODE]  
ON: Enable black and white display mode.  
OFF: Disable black and white display mode.  
4
 
2. TK-C1460U Series Controller  
TK-C1460BE Series Controller controls the following models.  
TK-C1460BE  
TK-C1480BE  
[MENU]  
Opens Setup menu by click.  
Use to close the Setup menu or to return to the main menu  
from the sub menu.  
[SET]  
Use to display the sub menu or to approve the settings.  
[Arrow buttons (UP/DOWN/RIGHT/LEFT)]  
Use to move the cursor on the setup menu.  
[DIGITAL ZOOM]  
Adjust the digital zoom ratio.  
WIDE: Wide angle  
TELE: Tele angle  
Use to set the items on the menu.  
[B&W MODE]  
ON: Enable black and white display mode.  
OFF: Disable black and white display mode.  
5
 
 
3. VR-510U Controller  
VR-510U Controller controls the following model.  
VR-510U  
[SEARCH SPEED]  
Set the speed of fast forward or rewind.  
Select 1/18, 1/6, 1/2, 1, 3, 5, 15, 60 or 360  
(1/18 is the slowest setting, and 360 is the fastest setting.)  
[Playback controls]  
Control the video during playback.  
Rewind  
Stop  
Playback  
Pause  
Fast Forward  
[SEARCH]  
The video is jumped to forward position or back by clicking during  
playing back.  
Three types of search are provided.  
EVENT: Jump to the position of the event started.  
ALARM: Jump to the position of the alarm recording was started.  
TIME: Jump over the period set by the Menu Switch.  
[TIME DATE SEARCH]  
Specify the day and time, and click [OK].  
The video jumps to the closest time as the setting, and paused.  
6
 
 
4. RM-P2580U(A) Controller  
RM-P2580U(A) Controller controls the following model.  
RM-P2580U(A)  
< A.SEQ tab >  
Position Shift buttons  
Camera Shift buttons  
[AUTO SEQUENCE]  
ON: Enable the auto sequence function.  
OFF: Disable the auto sequence function.  
[CAMERA]  
Select a camera (from 1 to 8) to display its image.  
(No image will be shown if the selected number is not  
attached to any camera.)  
Click Camera Shift buttons to change the camera  
number to the next or previous. (Unattached numbers  
to any cameras are skipped.)  
[POSITION]  
PAN/TILT Adfustment buttons  
Select one position to make the camera to point to the  
registered position. The valid position is from 1 to 99, or  
HOME. (No image will be shown if the selected position  
number is not registered on the camera.)  
Click Position Shift buttons to change the position  
number to the next or previous. (Unregistered numbers  
to any positions are skipped.)  
[IRIS]  
Adjust the camera iris.  
CLOSE: Close the iris.  
OPEN: Open the iris.  
[FOCUS]  
Adjust the focusing.  
NEAR: Focus on the near subjects.  
[PAN/TILT Adjustment buttons]  
Arrow buttons are provided to control the pan/tilt posi-  
tion of the camera.  
FAR: Focus on the far subjects.  
AUTO FOCUS: Adjust the focusing automatically.  
The camera position is returned to the home position by  
[HOME] button.  
[ZOOM]  
Adjust the zoom ratio.  
WIDE: Wide angle  
TELE: Tele angle  
[SPEED] (For PAN/TILT Adjustment)  
Set the speed of the panning/tilting.  
(1 is the slowest setting, and 8 is the fastest setting.)  
[SPEED] (For ZOOM and FOCUS)  
Set the speed of FOCUS and ZOOM.  
(1 is the slowest setting, and 3 is the fastest setting.)  
[AUTO PAN]  
< A.PAN tab >  
ON: Enable the auto pan function.  
OFF: Disable the auto pan function.  
[AUTO PTL]  
ON: Enable the auto patrol function.  
OFF: Disable the auto patrol function.  
7
 
 
VICTOR COMPANY OF JAPAN, LIMITED  
is a registered trademark owned by VICTOR COMPANY OF JAPAN, LIMITED.  
is a registered trademark in Japan, the U.S.A., the U.K. and many other countries.  
2003 VICTOR COMPANY OF JAPAN, LIMITED  
c
 

Intel Computer Hardware Vig390s User Manual
JVC Car Stereo System GET0287 003B User Manual
JVC CRT Television HV 32D25EJ User Manual
JVC Projector DLA G11U User Manual
Karcher Pressure Washer K 493 M User Manual
Kenwood Car Speaker KFC 1795PS User Manual
Kidde Smoke Alarm 0916E User Manual
KitchenAid Microwave Oven KBMS1454R User Manual
KitchenAid Range W10044930B User Manual
KitchenAid Washer KAWE764W User Manual