Fuzion 7236 RH Whirlpool
Product Codes beginning with: FUZ7236WRL
Also applies to products sold under part numbers: EF50, KL15, EF65, KL25, KL30, KL35, KL40, KL45
TECHNICAL SPECIFICATIONS
English
Metric
Outer Dimensions
70 3/4” L x 35 1/2” W x 24” H
1797 mm L x 902 mm W x 610 mm H
Interior Dimensions
(bottom of bath) L x W (Mid) x W (End)
48” L x 21 1/2” W x 21 1/2” W
Right hand drain/Left end pump
135 lbs
1219 mm L x 546 mm W x 546 mm W
Right hand drain/Left end pump
61 kg
Drain/Pump Configuration
Bath Weight (empty)
Total Weight/Floor Loading
Operating Gallonage (min-max)
1,210 lbs 69.6 lbs/ft2
550 kg 340 kg/m2
77 (min) 99 (max) U.S. Gals
291.5 (min) 375 (max) L
Electrical Specifications
Motor/Pump
Each component requires a separate, dedicated GCFI protected circuit
120V 20A 60HZ
120V 15A 60HZ
Heater
FEATURES, UPGRADES & ACCESSORIES
Material Type: High-Gloss Acrylic
D095 TheraPro Jet Trim Kit (specify metal finish)
Install Type: Drop-in with wood frame or Undermount
Available Colors: White (W), Almond (A), Oyster (Y), Black (B)
Cut-out: 69” x 33” or Undermount Template DD42000
Standard (Included) Features:
P556 AccuPro Jet Trim Kit (specify metal finish)
827: Chrome, 826: Brushed Nickel, 845: Oil Rubbed Bronze
*Note: D095 (Chrome) is standard on Illumatherapy jets.
GQ88 Light Chromatherapy Add-on Kit
14 jets, In-line Heater, Chromatherapy lighting, infinity edge overflow, 1
pillow, chrome twist and turn drain (for alternate finishes, replace with
standard parts, 1.5” drain elbow)
DD50 Replacement Pillow (specify color) 959: White, 958: Almond,
969: Oyster
*Faucet installation note:
Available Control Systems:
J4 Luxury Control Panel (standard)
J5 Luxury LCD Control Panel
Available Upgrades:
Whisper Quiet Technology,
Illumatherapy Lighting
Available Accessories:
Selecting a faucet for rim mounting: The combined thickness at the rim
of the bathtub shell and optional wood deck is 2” (50 mm) nominal. The
length of the faucet tailpiece(s) must be long enough to extend past this
dimension and have ample clearance to assemble any hardware (i.e.
locknut, water supply fittings, etc.) necessary for installation. For under-
mount units, the combined thickness of the bathtub shell is 1/2” (12 mm)
nomial and the undermount deck should not exceed the length of the
HB77 Optional wood frame (specify finish) 900: Unfinished, 935: Wenge, faucet tailpiece(s), including any assembly hardware.
936: Teak
KEY DIMENSIONS
Letter Description
English
70 3/4”
35 1/2”
24”
Metric
1797 mm
902 mm
610 mm
432 mm
260 mm
447 mm
178 mm
102 mm
76 mm
L
L
W
H
A
B
C
D
E
F
Outer Length
Outer Width
(G) Primary
Service
Access
Overall Height**
Overflow Height
Long Edge to Drain Center
Short Edge to Drain Center
Drain Shoe Length
Deck Height**
C
Overflow
17”
I
Motor
Suction
Fitting
W
10 1/4”
17 11/16”
7”
Control
Panel
3”
F
4”
Deck Width*
3”
Heater
*Deck width reflects only area indicated on detail.
G
I
Service Access Dimensions 12” H x 18” L 305 mm x 457 mm
Floor Cut-out for Drain
12” x 4”
305 mm x 102 mm
W
L
E
A
(Motor)
(Heater)
H**
(Motor)
(Heater)
D
B
Drain/Overflow
Side View
End View
**Height of tub only, optional wood frame adds 1.25”
Refer to installation instructions included with fixture before beginning installation. Please confirm product availability and specifications before commencing with any installation work.
PRODUCT SPECIFICATIONS AND AVAILABILITY ARE SUBJECT TO CHANGE WITHOUT NOTICE.
Note: Drain included. Non-standard
installation, refer to manual.
NOTE: Graphics May Not be to Scale
© 2010 Jacuzzi Luxury Bath
•
•
HD28000 REL 03/10
|