Jensen Automobile Accessories BT 390 User Manual

Bluetooth Handsfree  
Car Kit with LCD Display  
User’s Manual  
Model: BT-390  
 
 
 
 
1. Introduction  
Carefully unpack the BT-390 Bluetooth Handsfree Car Kit  
and check that the following items are included:  
n Identifying Components  
Unpack the Car Kit package and ensure the following items  
are included.  
Remote / Bracket / Clasp /  
BT-390 LCD  
Part # 31132450  
Junction Box  
Part # 31132100  
CR2032 Battery  
Part # 31132000  
Stand  
Part # 31132060  
Speaker  
Part # 31132430  
Microphone  
Part # 31132440  
Fuse Set  
Part # 31132010  
Power Cable  
Part # 31132010  
Note:  
If any item is missing or damaged, please contact your  
dealer.  
Download from Www.Somanuals.com. All Manuals Search And D1ownload.  
 
 
2. Installation  
This section demonstrates how to set up and install the BT-  
390 into a vehicle.  
n Installing the Junction Box  
The Car Kit is designed to work with the 12/ 24-volt power  
supply of the vehicle. Refer to the following to install the  
junction box in a vehicle.  
1. Locate a suitable place inside the car to mount the  
junction box. Select a dry place that avoids excessive  
heat and mechanical vibration. Ideally, the junction box  
should be hidden from view, but still easily accessible.  
Note:  
Make sure that the cables are long enough to support  
the location of the junction box. If the cables are not long  
enough, do not lengthen the cables. Instead, relocate the  
junction box.  
2. Use two screws (not included) to fasten the junction box  
in place.  
Download from Www.Somanuals.com. All Manuals Search And D3ownload.  
 
2. Installation  
o Connecting the Power Supply (For Options 1 and 2 only)  
The following illustration demonstrates how to connect the  
Car Kit’s power cables to the vehicle’s electrical system.  
Important:  
The blue cable must be connected to the 12/ 24V  
switched to enable the Car Kit to go into standby  
mode.  
Do not connect the blue cable to the +12/ 24V  
constant. Doing so may discharge the battery of  
the vehicle and prevent the Car Kit from being  
reset.  
Downlo4ad from Www.Somanuals.com. All Manuals Search And Download.  
 
2. Installation  
p Connecting Components  
The following illustration shows where to connect the  
components.  
Item  
Description  
The caller ID should be placed on the dash  
within view of the driver and passenger.  
(See Installing the Caller ID Display on  
page 9.)  
Caller ID  
Ideally, the microphone should be located in  
front of the user and above waist height.  
Microphone  
Speaker  
For best reception, the speaker should be  
mounted at least 80cm (30 inches) from the  
Car Kit’s microphone.  
Download from Www.Somanuals.com. All Manuals Search And D5ownload.  
 
2. Installation  
q Preparing the remote control  
The control module is designed to attach to the inside of the  
steering wheel on the left or right side.  
Installing the battery  
Before attaching the control module, install the supplied  
battery.  
1. Remove the battery cover from the rear of the control  
module.  
2. Insert the new battery with the correct polarity as shown  
below.  
3. Put the battery cover back on.  
+
Downlo6ad from Www.Somanuals.com. All Manuals Search And Download.  
 
2. Installation  
Attaching the remote control  
Refer to the following to attach the control module:  
1. Attach the rubber clasp to the two notches on one side  
of the bracket base.  
2. Pull tightly on the rubber clasp by holding it firmly from  
the middle and position the bracket base on the inside of  
the steering wheel.  
3. Wrap the rubber clasp tightly around the steering wheel  
and secure it on the other two notches on the bracket  
base.  
Download from Www.Somanuals.com. All Manuals Search And D7ownload.  
 
2. Installation  
4. Attach the bracket cover with the two supplied hex bolts.  
5. Slide the control module into the module bracket as  
shown. (To remove the control module, push the release  
button to the right and remove the control module.)  
6. Now the remote is attached to the wheel.  
Downlo8ad from Www.Somanuals.com. All Manuals Search And Download.  
2. Installation  
r Installing the Caller ID Display  
The caller ID is designed to sit on the  
dashboard or other location. Once it is  
attached to the stand remove the  
adhesive cover from the sticker pad  
(attached) from the base and press  
firmly to secure in place.  
If you wish to attach the LCD display elsewhere, such as  
next to the car radio, detach the base from the stand by  
removing the screw as demonstrated.  
Turn the stand inwards and apply a sticker pad (provided)  
to the back of the stand. Position the stand and press firmly  
to secure in place.  
Download from Www.Somanuals.com. All Manuals Search And D9ownload.  
 
2. Installation  
s Installing the Microphone  
Before installing the microphone, take note of the following:  
ƒ
Make sure that the cable can reach from the microphone  
to the speaker. If the cable is too short, relocate the  
microphone. Do not lengthen the cable.  
ƒ
The supplied microphone is uni-directional. For best  
results, place the microphone in front of the person  
talking. It has a reception angle of 60 degrees, and is  
most effective within a 60-cm radius.  
Installing the Microphone  
Find a suitable place for the microphone. Remove dust and  
grease from the surface.  
1. Remove the protective  
cover from the Velcro and  
press it firmly onto the  
bottom of the microphone.  
2. Remove the protective  
cover from the other Velcro  
pad and firmly press the  
pad in place.  
3. Attach the microphone.  
Downlo1ad0from Www.Somanuals.com. All Manuals Search And Download.  
 
3. Operation  
n How to Operate the Car Kit  
Understanding the icons on your screen and remote control  
Please see below for the explanations of the icons on the  
main screen.  
Download from Www.Somanuals.com. All Manuals Search And 1D1ownload.  
 
3. Operation  
o Basic operation  
Connecting to the Mobile Phone for the First Time  
As soon as the ignition is turned on “BT-390” text will be  
displayed on the backlit screen and it will quickly enter the  
“Pairing” mode searching for available Bluetooth mobile  
phones for pairing up. If the pairing screen does not display  
automatically, turn on this function manually (See  
Connection Settings on page 18).  
Pa iring  
BT-390  
Switch on mobile phone’s Bluetooth connection and  
conduct a search for a new Bluetooth audio device. When  
you see BT-390’s name appearing on the mobile phone  
screen please select this item to pair and enter 1234 when  
prompted by the password request. This will allow BT-390’s  
device name to reside in your mobile phone memory, listed  
along with other previously paired devices in the handset.  
You may need to press the connect command on the phone  
to establish the connection with BT-390 after pairing and  
the mobile phone name should appear on the main screen.  
Nokia 6230i  
C onnec ted  
The car kit screen will also display battery and signal  
indications if your phone supports these functions.  
Note:  
Please contact your dealer for a compatibility list.  
Downlo1ad2from Www.Somanuals.com. All Manuals Search And Download.  
 
3. Operation  
p Dialing the First Call  
Scroll down to enter main menu and go to Dial Number  
then press the Enter button. Scroll up/down to go to your  
desired number, press Enter to select the number.  
Phone Book  
1 2 3 4 5 6 7 8  
C a ll History  
Dia l Number  
Settings  
0286655757  
Once you have finished selecting all the numbers required,  
press Answer to call the complete telephone number you  
have just entered.  
Receiving and Ending a Phone Call  
When there is an incoming call, press the Answer button to  
accept the phone call. To end a call, press the Reject/ End  
button to terminate the conversation.  
Adjusting the Conversation Volume  
User can adjust the volume during the conversation by  
pressing the up or down scroll button on the remote.  
q Advanced Operation  
Phonebook Functions 1 – Updating Phonebook  
Phone Book  
C a ll History  
Dia l Number  
Settings  
Download from Www.Somanuals.com. All Manuals Search And 1D3ownload.  
 
3. Operation  
There are a number of ways to upload your phonebook to  
the BT-390, if your mobile phone supports automatic  
phonebook synchronization (for example, Nokia 6230i), it  
will upload call history, phone book entries, and sort the  
phone book as soon as the phone is connected with the car  
kit.  
Note:  
Phonebook synchronization and sorting time may differ  
depending on size of phonebook list and also the phone’s  
transfer speed. This may also affect the initial remote  
control response at start up.  
In the event that you do not wish to upload automatically,  
you can disable this function and upload the phonebook  
manually. To setup manual phonebook upload, please  
follow the steps below:  
Settings Phone Book Sync →  
Enable/Disable  
See Other Settings on page 22 for more information.  
Note:  
Phone Book Sync default setting is enabled.  
To force sync the contacts manually from both phone  
memory and the SIM card, please follow the steps below:  
Phone Book Sync Phone Book  
Please note that automatic phonebook synchronization will  
add in new contacts which are entered into your mobile  
phone but it will not delete the entries which have been  
removed from your phone. To update your deletions (or  
additions); please use the Sync Phone Book function.  
Downlo1ad4from Www.Somanuals.com. All Manuals Search And Download.  
3. Operation  
Na me & Numbers  
Sync Phone Book  
Rec eive C onta c t  
Ba c k  
Note:  
Contacts are picked up in random order by the car kit;  
therefore, BT-390 will perform the sorting function in the  
background after the sync. If you access the phonebook  
before the sorting is completed, you may see that some  
contacts are not displayed in right order. This is normal for  
the first time sync and please waits until the sorting process  
is completed before accessing the phonebook.  
However, if your phone does not support automatic  
phonebook synchronization (which also means you cannot  
use the Sync Phone Book function) you will need to send  
the required entries manually from the mobile phone to the  
car kit under the Object Push Profile (OPP) mode via  
Bluetooth (also known as Sending Business Card via  
Bluetooth function). To use the OPP mode for uploading  
contacts please use the following steps:  
Phone Book Receive Contact  
Na me & Numbers  
Sync Phone Book  
Rec eive C onta c t  
Ba c k  
Soon after you select Receive Contact, the BT-390  
temporarily disconnects from your mobile phone to allow  
the contact entries to be sent over. Access your phonebook  
now and go to the required contact entry. Choose option on  
your phone screen and select send via Bluetooth to transfer  
the contact to car kit (Command may vary on different  
handset please consult the phone manual). BT-390’s  
Download from Www.Somanuals.com. All Manuals Search And 1D5ownload.  
3. Operation  
screen will display the contact received. Repeat the process  
for other entries if necessary. Once you have finished,  
press the Reject/End button to stop OPP mode and re-  
establish the Bluetooth link with your mobile phone.  
Note:  
Some phones support sending multiple contacts in one  
operation under the OPP mode (such as Mark all function  
in Nokia). It is recommended that no more than one  
hundred selections be sent at a time.  
Phonebook Functions 2 – Search for a Name to Call  
After the phonebook is uploaded contacts will reside in the  
car kit’s memory. You can search these entries to call by  
going through the A-Z index and selecting a character to  
look up a particular name that starts with the alphabet. For  
instance, choose E and it will list the names starting with E  
(Erica for this instance). To go to a desired phonebook  
entry, scroll up/down the alphabetical list and select a letter  
entry.  
Phone Book Name & Numbers  
ABCDEFGHIJKLMNOP…  
0286655757  
Eric a  
ABC DEFG HIJ  
Offic e  
Peter  
Go to the desired contact and press Answer/Call to dial  
out.  
Shortcut Key:  
Alternatively, press the Enter button in the main idle screen  
to instantly access the phonebook’s A-Z index.  
Downlo1ad6from Www.Somanuals.com. All Manuals Search And Download.  
 
3. Operation  
Accessing Received, Dialed, and Missed Calls  
BT-390 can sync with your mobile phone’s call history. To  
access the previously dialed calls please go through the  
following steps:  
Call History Calls Dialed  
To access received calls  
Call History Calls Received  
To access the missed calls:  
Call History Calls Missed  
Dialing a Number  
To dial a desired telephone number that is not in the  
phonebook access the Dial Number function. Go to the  
required number and press Enter to type it on the screen.  
To delete a wrongly selected number move to Å symbol  
and press Enter to delete it. Once the complete telephone  
number is selected, press the Answer button to call the  
telephone number you have just entered.  
Phone Book  
1 2 3 4 5 6 7 8  
C a ll History  
Dia l Number  
Settings  
0286655757  
Initiating Private Calls  
A privacy function is available in the BT-390 car kit. The  
handsfree feature is disabled when the privacy function is  
enabled allowing for the use of the handset during the  
conversation.  
Download from Www.Somanuals.com. All Manuals Search And 1D7ownload.  
 
3. Operation  
To initiate the private call function, simultaneously press  
both scroll buttons on the remote control during a call. Once  
activated, press the Answer button once to return to  
handsfree.  
Warning:  
It maybe illegal to use mobile phone while driving. Please  
check the law in your region. We do not recommend any  
use of mobile phone by driver when driving.  
r Connection Settings  
Pairing Setup  
The majority of the phones can connect with BT-390 under  
the hands-free profile as follows:  
Settings Bluetooth Setup Pairing →  
Pairing Phone  
Some phones do not support the hands-free profile but  
instead offer a headset profile. In this case, you will need to  
setup the headset pairing to connect the mobile phone with  
BT-390 as follows:  
Settings Bluetooth Setup Pairing →  
Pairing Headset  
Disconnecting From the Current Phone  
You can disconnect the phone from  
the BT-390’s menu:  
NOKIA N95  
Settings Bluetooth Setup →  
Active Phone Disconn  
Disc onn  
Exit  
Downlo1ad8from Www.Somanuals.com. All Manuals Search And Download.  
 
3. Operation  
Viewing, Connecting, and Deleting Previously Paired Phones  
You can re-establish a connection with a previously paired  
phone by entering the paired phone lists:  
Settings Bluetooth Setup Paired Phone  
Note:  
To re-establish a connection with a previously paired  
device, the connection with current device must be disabled  
first.  
To re-establish a link please go to the desired device name  
and press Conn to re-connect with the BT-390:  
Settings Bluetooth Setup Paired Phone  
select the device (e.g. Sony Ericsson K800i)  
Conn  
Sony Eric sson K800i  
Nokia N95  
Nokia N80  
Sony Eric sson K800i  
C onn Del Exit  
To delete a pairing simply select the desired device name  
and scroll to Del and press Enter to confirm the deletion:  
Settings Bluetooth Setup Paired Phone  
select the device (e.g. Sony Ericsson K800i)  
Del  
s Language Settings  
Language Settings  
Depending on your region, there are up to 10 languages  
built into the BT-390 and the default language is English. To  
Download from Www.Somanuals.com. All Manuals Search And 1D9ownload.  
 
3. Operation  
change to a different language simply follow the following  
steps:  
Settings Language Setup English  
Note:  
Available languages: English, Spanish, Portuguese,  
French, Italian, German, Dutch, Norwegian, Danish,  
Swedish (Region 1); English, Czech, Polish, Hungarian,  
Russian, Hebrew (Region 2); English, Chinese (Region 3).  
t Sound Settings  
Adjusting the Speaker Volume  
You can adjust the speaker volume to suit your required  
sound level:  
Settings Sound Settings Volume  
Settings + / -  
Volume  
Disabling and Enabling the Key Tone  
You can disable or enable the BT-  
390’s key tone:  
Key Tone Setting  
Ena ble Exit  
Settings Sound Settings →  
Key Tone Setting Enable/Disable  
u Display Settings  
Adjusting Display Contrast  
You can adjust the contrast of the LCD display:  
Downlo2ad0from Www.Somanuals.com. All Manuals Search And Download.  
 
3. Operation  
Settings Display Settings Contrast +/-  
C ontra st  
Adjusting Display Brightness  
You can adjust the backlight level of the LCD display:  
Settings Display Settings Brightness →  
+/-  
Brightness  
Changing the Backlight Color  
You can change the color of the backlight to suit your car’s  
interior. BT-390 has 5 preset colors to choose from:  
Settings Display Settings Screen Color  
White  
Available colors: Orange, Green, Blue, Red.  
You can also self-define the backlight color as follows:  
Settings Display Settings Screen Color  
User Define  
Download from Www.Somanuals.com. All Manuals Search And 2D1ownload.  
 
3. Operation  
R
G
B
Enabling Auto Dim Screen  
You can enable or disable the backlight to go dim when the  
system idle time is longer than 10 seconds:  
Settings Display Settings Screen Auto  
Off Enable/ Disable  
Sc reen Auto Off  
Ena ble  
Exit  
v Other Settings  
Setting up Automatic Phonebook Synchronization  
You can setup to upload your phonebook automatically  
when a connection is established:  
Settings Phone Book Sync Enable/  
Disable  
Phone Book Sync  
Ena ble  
Exit  
Downlo2ad2from Www.Somanuals.com. All Manuals Search And Download.  
 
3. Operation  
Finding Out the Device Software & Firmware Version  
For information about the device, go to:  
Settings About Car Kit  
BT-390  
S/W V 2.5AF  
BT: 200B009  
Device Name  
Software Version  
Bluetooth Version  
w Multimedia Functions  
BT-390 has a built-in F.M. transmitter which not only offer  
alternative sound output for handsfree communication but  
also allows user with A2DP phones to stream music in the  
phone to the Hi-Fi radio via car kit.  
Setting up FM Transmission  
To setup FM frequency, please use the following steps:  
Settings Sound Settings FM Settings →  
F.M. 88.8 (MHz)  
Other Frequencies: 100.1MHz, 106.2 MHz, FM User 1, and  
FM User 2.  
To setup a user defined frequency:  
Settings Sound Settings FM Settings→  
FM User 1 (or FM User 2)  
To turn off FM transmitter:  
Settings Sound Settings FM Settings  
FM Disable  
Download from Www.Somanuals.com. All Manuals Search And 2D3ownload.  
 
3. Operation  
FM User 2  
FM Disa ble  
To enable or disable handsfree function via FM transmitter:  
Settings Sound Settings H.F. Out F.M. →  
Enable/Disable  
HF OUT FM  
Ena ble  
Exit  
Using A2DP Media Player  
To enter Media Player interface:  
Settings Sound Settings Media Player  
Downlo2ad4from Www.Somanuals.com. All Manuals Search And Download.  
 
3. Operation  
Use the Media Menu buttons to Play, Pause, jump to  
Previous or Next songs, and Stop playing.  
Shortcut Key:  
Alternatively, press the Up scroll button in the idle screen to  
gain access to the media player instantly.  
Note:  
Phone must support A2DP to use this function. Not all  
phones are equipped with A2DP function. Please check  
your phone specification for further information.  
Text-To-Speech Setting  
BT-390 is equipped with the advanced Text to Speech (TTS)  
technology which speaks out the menu and car kit’s operations in  
real person voice to assist driver operating the car kit while driving  
the vehicle.  
Setting up Text-To-Speech  
To enable or disable TTS Feature:  
Settings Sound Settings Text to  
SpeechEnable/Disable  
Text to Speec h  
Ena ble  
Exit  
Download from Www.Somanuals.com. All Manuals Search And 2D5ownload.  
 
3. Operation  
Factory Settings Reset  
BT-390 allows you to master reset the car kit back to the  
original factory settings. To master reset BT-390 please  
press both Answer and Reject buttons at the same time for  
few seconds until you hear a series of beeps and then it will  
automatically enter the pairing screen to indicate that car kit  
has been reset back to the original factory settings.  
Warning:  
If you reset the car kit, all phonebook entries and paired  
settings will be erased.  
Bluetooth Firmware and CPU Software Upgrade  
From time to time new Bluetooth phones are introduced  
and these phones may not be 100% compatible with BT-  
390 as the software may not recognize new features or  
functions provided on the new phone. BT-390’s firmware  
must be updated to accommodate new phones. BT-390  
offers an easy way of upgrading software. To use this  
feature please contact your dealer for an upgrade  
instruction manual.  
Phone Book Sync  
About C a r Kit  
Firmwa re Upda te  
Exit  
Disclaimer:  
All brands, trademarks and names are the properties of their respective owners.  
They are solely used to identify their respective products, and have no  
indication of affiliation or relationship.  
Downlo2ad6from Www.Somanuals.com. All Manuals Search And Download.  
 
3. Operation  
Troubleshooting  
Make sure the bluetooth  
My mobile phone can’t make  
a connection.  
function on your phone is  
enabled.  
Make sure the car ignition is on.  
If on and no power check  
the fuses and wiring.  
Reset the Car Kit and try again.  
Turn your phone off and on  
again,  
and  
try  
the  
proceedure for connection  
once more.  
If your phone is very new check  
the support website for an  
upgraded software version.  
With some phones, adjusting  
the volume before the call is  
initaited will disconnect the  
call. Wait until the call is  
answered, then adjust the  
volume.  
When my mobile phone is  
ringing and  
I
adjust the  
call is  
volume,  
the  
disconnected.  
Re-record voice tags using the  
method described in “Notes  
on using Voice Recognition”  
above.  
My phone doesn’t recognize  
my voice tags for voice  
recognition.  
(Note: Not available on all  
Close your windows while  
using voice recognition.  
phones.  
phone’s user manual for  
Check  
your  
availability.)  
Speak clearly in the same  
manner in which the voice  
tag was recorded.  
Download from Www.Somanuals.com. All Manuals Search And 2D7ownload.  
 
3. Operation  
Downlo2ad8from Www.Somanuals.com. All Manuals Search And Download.  

Infiniti Network Card WLI CB G300N User Manual
Jenn Air Cooktop CCE1400 User Manual
JVC Camcorder 42PFL8803D User Manual
JVC Speaker CS BB2 User Manual
Kalorik Fryer USK FT 1 User Manual
Key Digital Stereo Amplifier KD DA6 User Manual
KitchenAid Oven KEBI100W User Manual
Kobe Range Hoods Ventilation Hood CX1842GS 8 User Manual
Korg Musical Instrument musical instruments User Manual
Kramer Electronics Switch VS 30FW User Manual