Jensen CD Player CD 472 User Manual

MODEL CD-472  
PORTABLE AM/FM STEREO CD PLAYER  
PLEASE READ THIS USER MANUAL COMPLETELY BEFORE  
OPERATING THIS UNIT AND RETAIN THIS BOOKLET FOR  
FUTURE REFERENCE.  
 
13. Unplug this apparatus during lightening storms or when unused for a long periods of time.  
14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus  
has been damaged in any way, such as power-supply cord or plug is damaged, liquid has  
been spilled or objects have fallen into the apparatus, the apparatus has been exposed to  
rain or moisture, does not operate normally, or has been dropped.  
15. This appliance shall not be exposed to dripping or splashing water and that no object filled  
with liquids such as vases shall be placed on the apparatus.  
16. Do not overload wall outlet. Use only power source as indicated.  
17. Use replacement part as specified by the manufacturer.  
18. The product may be mounted to a wall only if recommended by the manufacturer.  
19. Upon completion of any service or repairs to this product, ask the service technician to  
perform safety checks.  
20. Power Sources - This product should be operated only from the type of power source  
indicated on the marking label. If you are not sure of the type of power supply to your home,  
consult your product dealer or local power company. For products intended to operate from  
battery power, or other sources, refer to the operating instruction.  
21. Object and Liquid Entry - Never push objects of any kind into this product through openings  
as they may touch dangerous voltage points or short-out parts that could result in a fire or  
electric shock. Never spill liquid of any kind on the product.  
22. Damage Requiring Service - Unplug this product from the wall outlet and refer servicing to  
qualified service personnel under the following conditions:  
a) When the power-supply cord or plug is damaged,  
b) If liquid has been spilled, or objects have fallen into the product,  
c) If the product has been exposed to rain or water,  
d) If the product does not operate normally by following the operating instructions. Adjust  
only those controls that are covered by the operating instructions as an improper  
adjustment of other controls may result in damage and will often require extensive work  
by a qualified technician to restore the product to its normal operation.  
e) If the product has been dropped or damaged in any way, and  
f) When the product exhibits a distinct change in performance - this indicates a need for  
service.  
CAUTION:  
TO PREVENT ELECTRIC SHOCK,  
MATCH WIDE BLADE OF AC PLUG TO WIDE SLOT.  
FULLY INSERT.  
SAVE THESE INSTRUCTIONS  
2
 
CAUTION  
Follow the advice below for safe operations.  
ON PROTECTION AGAINST LASER ENERGY EXPOSURE  
As the laser beam used in this compact disc player is harmful to the eyes, do not attempt to  
disassemble the casing.  
Stop operation immediately if any liquid or solid object should fall into the cabinet.  
Do not touch the lens or poke at it. If you do, you may damage the lens and the player may not  
operate properly.  
Do not put anything in the safety slot. If you do, the laser diode will be ON when the CD door is  
still open.  
If the unit is not to be used for a long period of time, make sure that all power sources are  
disconnected from the unit. Remove all batteries from the battery compartment.  
This unit employs a laser. The use of controls or adjustment or performance of procedures  
other than those specified here may result in exposure to hazardous radiation.  
Should any trouble occur, remove the power source and refer servicing to qualified personnel.  
COMPLIANCE WITH FCC REGULATIONS  
This equipment has been tested and found to comply with the limits for a Class B Digital Device,  
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable  
protection against harmful interference in a residential installation. This equipment generates,  
uses and can radiate radio frequency energy and, if not installed and used in accordance  
with the instructions, may cause harmful interference to radio communications. However,  
there is no guarantee that interference will not occur in a particular installation. If this equipment  
does cause harmful interference to radio or television reception, which can be determined  
by turning the equipment off and on, the user is encouraged to try to correct the  
interference by one or more of the following measures:  
- Reorient or relocate the receiving antenna.  
- Increase the separation between the equipment and receiver.  
- Connect the equipment into an outlet on a circuit different from that to which the  
receiver is connected.  
- Consult the dealer or an experienced radio/TV technician for help.  
WARNING  
Changes or modifications to this unit not expressly approved by the party responsible for  
compliance could void the user's authority to operate the equipment.  
3
 
DEAR JENSEN CUSTOMER  
Selecting fine audio equipment such as the unit you've just purchased is only the start of your musical  
enjoyment. Now it's time to consider how you can maximize the fun and excitement your equipment offers.  
This manufacturer and the Electronic Industries Association's Consumer Electronics Group want you to  
get the most out of your equipment by playing it at a safe level. One that lets the sound come through loud  
and clear without annoying blaring or distortion and, most importantly, without affecting your sensitive  
hearing.  
Sound can be deceiving. Over time your hearing "comfort level" adapts to higher volumes of sound. So  
what sounds "normal" can actually be loud and harmful to your hearing. Guard against this by setting your  
equipment at a safe level BEFORE your hearing adapts.  
To establish a safe level:  
Start your volume control at a low setting.  
Slowly increase the sound until you can hear it comfortably and clearly, and without distortion.  
Once you have established a comfortable sound level:  
Set the dial and leave it there.  
Taking a minute to do this now will help to prevent hearing damage or loss in the future. After all, we want  
you listening for a lifetime.  
We Want You Listening For a Lifetime  
Used wisely, your new sound equipment will provide a lifetime of fun  
and enjoyment. Since hearing damage from loud noise is often  
undetectable until it is too late, this manufacturer and the Electronic  
Industries Association's Consumer Electronics Group recommend you  
avoid prolonged exposure to excessive noise.  
Customer's Record:  
The serial number of this product is found on its bottom. You should note the serial number of this unit in  
the space provided as a permanent record of your purchase to aid in identification in the event of theft of  
loss.  
Model Number: CD-472  
Serial Number: ____________________  
4
 
LOCATION OF CONTROLS  
1. Volume Control  
12. Dial Scale  
2. Function Selector  
13. Repeat Indicator  
14. Program Indicator  
15. LED Display  
3. Stereo Headphone Jack  
4. Repeat (REP) Button  
5. Program (PROG) Button  
16. Play/Pause Indicator  
6. Skip Backward/Fast Reverse Button  
7. Stop Button  
8. Play/Pause Button  
9. CD Door  
17. Tuning Control  
18. Band Selector (AM/FM/FM Stereo)  
19. Battery Compartment Door  
20. AC Power Jack  
10. Telescopic Antenna  
11. FM Stereo Indicator  
21. Speakers  
22. DBBS Control  
5
 
IMPORTANT NOTES  
Avoid installing the unit in locations described below:  
Places exposed to direct sunlight or close to heat radiating appliances such as electric heaters.  
Dusty places.  
Places subject to constant vibration.  
Humid or moist places.  
POWER SOURCES  
This unit operates on 120V~ 60Hz or 8 x DC1.5V “C” (UM-2) batteries. Do not attempt to operate the radio  
on any other power source. You could cause damage to the unit and void your warranty.  
Please be sure the power outlet you plug this unit into is working and receives constant (unswitched) power.  
AC OPERATION  
1.  
2.  
Plug the AC POWER CORD into a 120V~ 60Hz outlet.  
Slide the FUNCTION SELECTOR to “CD” for CD play, “FM” or “FM ST.” for FM radio, “AM” for AM  
radio and “OFF” for unit power off.  
BATTERY OPERATION  
1. Remove the battery door.  
2. Install 8 x DC1.5V “C” (UM-2) batteries (not included) according to the polarity diagram inside the battery  
compartment.  
3. Close the battery door.  
IMPORTANT:  
Be sure that the batteries are installed correctly.  
Wrong polarity may damage the unit and void the warranty.  
For best performance and longer operating time, we recommend the use of good quality  
alkaline-type batteries.  
CAUTION  
Do not mix old and new batteries.  
1.  
2.  
3.  
Do not mix alkaline, standard (carbon-zinc) or rechargeable (nickel-cadmium) batteries.  
If the unit is not to be used for an extended period of time, remove the battery. Old or leaking battery can  
cause damage to the unit and may void the warranty.  
Do not dispose of batteries in fire, batteries may explode or leak.  
4.  
BATTERY REPLACEMENT  
When the output sound of this unit becomes distorted or the CD player operation appears unstable, the  
batteries are weak. You need to replace all the exhausted batteries at the same time as soon as possible to  
avoid battery leakage.  
RADIO OPERATION  
1.  
2.  
3.  
4.  
5.  
Slide the FUNCTION SELECTOR to “RADIO”.  
Select your desired radio band using the BAND SELECTOR for AM/FM or FM Stereo.  
Rotate the TUNING KNOB to your desired radio station according to the dial scale on the knob.  
Rotate the VOLUME CONTROL to adjust to the desired output level.  
To turn off the radio, slide the FUNCTION SWITCH to “AUX (OFF)”.  
TIPS FOR BEST RECEPTION  
AM – The AM antenna is located inside the cabinet of the main unit. If AM reception is weak, change the  
position of cabinet until the internal antenna picks up the strongest signal,  
FM – During FM reception, always keep the FM Telescopic Antenna fully extended. If FM reception is still  
weak try repositioning the unit near an open window until you get the best reception.  
AUXILIARY INPUT (AUX) OPERATION  
You can play other music sources (iPod, MP3 player or other digital audio players) through the speakers of this  
system.  
1. Slide the FUNCTION SWITCH to the “AUX” position.  
6
 
2. Plug one end of an appropriate audio cable (not included) into the AUX IN Jack of this unit and the other  
end to the line out or headphone jack of your digital audio player.  
3. Start playing your digital audio player and gradually increase the volume output (if necessary) until a clear,  
undistorted sound is heard from the speakers of this unit.  
4. Adjust the VOLUME CONTROL until you reach a comfortable listening level.  
5. To stop auxiliary input function, simply remove the line in cable from the AUX IN JACK.  
CD OPERATION  
NOTE: This unit not only plays commercial compact discs but also self-complied CD-RW discs.  
Because of non-standardized format definition/production of CD-R/RW, playback quality &  
performance are not guaranteed.  
Manufacturer is not responsible for the playability of CD-R/RW due to recording conditions such as  
PC performance, writing software, media properties etc.  
Do not attach a label or seal to either side of the CD-R/RW disc. It may cause a malfunction.  
PLAY MODE  
1. Slide the FUNCTION SWITCH to the “CD” position.  
2. Open the CD DOOR, load a CD with the label side facing upward and then close the CD door.  
3. Disc information (total number of tracks) will appear on the LED DISPLAY.  
4. Press PLAY/PAUSE BUTTON to start playing the CD. The play/pause indicator on the LED  
DISPLAY will light steadily.  
5. Adjust the VOLUME CONTROL to the desired volume level.  
6. Press STOP BUTTON to stop playing.  
7. To turn off the CD player, slide the FUNCTION SWITCH to “AUX (OFF)”.  
NOTE: If skipping occurs during CD play, try turning the volume down.  
Do not open the CD DOOR when a CD is playing.  
REPEAT MODE  
Repeat 1  
When the REPEAT BUTTON is pressed once, the repeat indicator on the LED DISPLAY will light and blink  
continuously. The current track will be repeated until it is interrupted.  
Repeat All  
When the REPEAT BUTTON is pressed twice, the repeat indicator will light steadily. The whole disc will be  
played continuously.  
To Cancel Repeat Function: Press the REPEAT BUTTON until the repeat indicator is off.  
SKIP AND SEARCH MODE  
1. During Play or Pause mode, tap the FORWARD (FF) "!" or REVERSE (REV) """ BUTTON to go to  
the next track or go back to the beginning of the track.  
2. During play mode or Pause mode, press and hold the FORWARD (FF) "!" or REVERSE (REV) """  
BUTTON to search within the track with audible high speed forward or backward playback.  
PROGRAM PLAY MODE  
This function allows music tracks to be played in a programmed sequence.  
NOTE: Program can only be set in STOP mode.  
1.  
2.  
Press the PROGRAM BUTTON once. “0” will flash in the LED DISPLAY.  
Press the FORWARD (FF) "!" or REVERSE (REV) """ BUTTON to select the track to be  
programmed. In this example, track 5 is selected.  
3.  
4.  
5.  
Press the PROGRAM BUTTON again to store selection. The LED DISPLAY will go back to “0” and blink  
to prompt for the next input.  
You may repeat steps #2 to #3 to program as many as 20 tracks. If you attempt to program more than  
20 tracks, “ - - “ will blink in the LED DISPLAY.  
Press PLAY BUTTON to complete and start program play. Press STOP BUTTON to stop.  
7
 
6.  
To review the programmed tracks, press the STOP BUTTON and then the PROGRAM BUTTON. The  
first programmed track number will blink in the LED DISPLAY. Press PROGRAM BUTTON repeatedly  
to loop through all the programmed tracks.  
7.  
8.  
While reviewing program, you may add new tracks as in steps #1 to #3 when a blinking “0” appears. If  
“ - - “ blinks in the LED DISPLAY, you cannot add more new track.  
To cancel programmed play, press the STOP BUTTON while reviewing programmed tracks or open the  
CD DOOR in stop mode.  
USING HEADPHONES (NOT INCLUDED)  
Inserting the plug of your headphones into the Stereo Headphone Jack will enable you to listen to the CD or  
radio in private. When using headphones, the speakers will be automatically disconnected.  
SPECIFICATIONS  
Frequency Range:  
Power Sources:  
AM 530 - 1710 kHz  
FM 88 - 108 MHz  
120V~ 60Hz 12W or  
8 x DC1.5V ‘C’ (UM-2) Batteries (Not included)  
8
 
CARE AND MAINTENANCE  
1.  
2.  
Children should be supervised when using this appliance.  
Never wrap the earphone lead around any animal or person. Special care should be taken with long  
wires.  
3.  
4.  
5.  
Clean your unit with a damp (never wet) cloth. Solvent or detergent should never be used.  
Avoid leaving your unit in direct sunlight or in hot, humid or dusty places.  
Keep your unit away from heating appliances and sources of electrical noise such as fluorescent lamps  
or motors.  
6.  
If drop-outs or interruptions occur in the music during CD play, or if the CD  
fails to play at all, its bottom surface may require cleaning. Before playing,  
wipe the disc from the center outwards with a good soft cleaning cloth.  
TROUBLESHOOTING GUIDE  
Symptom  
Possible Cause  
Solution  
Noise or sound distorted - Station not tuned properly for AM or  
- Retune the AM or FM broadcast  
station.  
on AM or FM broadcast  
FM.  
- FM: FM telescopic antenna is not  
extended.  
- AM: The bar antenna is not positioned  
correctly  
- FM: Extend FM telescopic antenna.  
- AM: Reposition the unit until the best  
reception is obtained.  
AM or FM no sound  
- Unit not in “RADIO” function mode.  
- Slide Function Selector to “RADIO”  
position.  
- Volume set at minimum  
- Unit not in CD function mode.  
- CD is not loaded properly.  
- If the CD is self-compiled, the media  
used may not be compatible with the  
player.  
- Increase Volume.  
CD player will not play  
- Select CD function mode.  
- Load CD with label side up.  
- Use better quality blank media and  
retest.  
CD skips while playing  
- Disc is dirty or scratched.  
- Wipe CD with clean cloth or use  
another disc.  
Intermittent sound from  
CD player  
- Dirty or defective disc  
- Dirty pick up lens  
- Clean or replace the defective disc.  
- Use a CD lens cleaning disc to clean  
the lens.  
- Player is subject to excessive shock  
or vibration  
- Relocate the player away from  
shock or vibration.  
Sound appears  
distorted at high volume  
setting  
- Volume control is set to maximum.  
- Adjust Volume Control to a lower  
level.  
- Turn off DBBS function for very loud  
music.  
SERVICE  
Please refer to the instructions on the enclosed warranty card for returning your unit for service. When  
returning the unit, please remove batteries to prevent damage to the unit in transit and/or from possible  
battery leakage. We are not responsible for batteries returned with the product or for the cost of replacement.  
Distributed by:  
Spectra Merchandising International, Inc.  
Chicago Industry Tech Park  
4230 North Normandy Avenue  
Chicago, IL60634, U.S.A.  
Please have model number ready, for Customer Service, call 1-800-777-5331  
Printed in China  
9
 

Indesit Refrigerator TA5 TA5S User Manual
Invacare Mobility Aid 1000 User Manual
Jenn Air Refrigerator W10379137A User Manual
Jensen Car Stereo System CD315X User Manual
Jensen Marine Radio MSR180 User Manual
John Deere Welding System AC G6010H User Manual
JVC MP3 Player XL R5000BK User Manual
JVC Projector DLARS20 User Manual
Kettler Backyard Playset 8411 182 User Manual
Kowa Saw VK 2 User Manual