Jensen MP3 Docking Station JiSS 100 User Manual

Portable Docking Music System for iPod  
Owner’s Manual  
JiSS-100  
(iPod Not Included)  
Please read this Instruction Manual carefully before  
using the unit and retain it for future reference  
 
IMPORTANT SAFETY INSTRUCTIONS  
(Continued)  
6. Clean only with a dry cloth.  
7. Do not block any of the ventilation openings. Install in accordance with the manufacturer’s  
instructions.  
8. Do not install near any heat sources such as radiators, heat registers, stoves, or other  
apparatus (including amplifiers) that produce heat.  
9. Do not defeat the safety purpose of the polarized or grounding – type plug. A polarized plug  
has two blades with one wider than the other. A grounding type plug has two blades and a  
third grounding prong. The wide blade or the third prong is provided for your safety. If the  
provided plug does not fit into your outlet, consult an electrician for replacement of the  
obsolete outlet.  
10.Protect the power cord from being walked on or pinched particularly at plugs, convenience  
receptacles and the point where they exit from the apparatus.  
11.Only use attachments/accessories specified by the manufacturer.  
12.Use only with a cart, stand, tripod, bracket, or table specified by the  
manufacturer, or sold with the apparatus. When a cart is used, use  
caution when moving the cart/apparatus combination to avoid injury  
from tip-over.  
13.Unplug this apparatus during lightning storms or when unused for long  
periods of time.  
14.Refer all servicing to qualified service personnel. Servicing is required when the apparatus  
has been damaged in anyway, such as power-supply cord or plug is damaged, liquid has  
been spilled or objects have fallen into the apparatus, the apparatus has been exposed to  
rain or moisture, does not operate normally, or has been dropped.  
15.The apparatus shall not be exposed to dripping or splashing and that no objects filled with  
liquids, such as vases, shall be placed on apparatus.  
L'appareil ne doit pas être exposé aux écoulements ou aux éclaboussures et aucun objet  
ne contenant de liquide, tel qu'un vase, ne doit être placé sur l'objet.  
16.Main plug is used as disconnect device and it should remain readily operable during  
intended use. In order to disconnect the apparatus from the mains completely, the mains  
plug should be disconnected form the mains socket outlet completely.  
17.Battery shall not be exposed to excessive heat such as sunshine, fire or the like.  
Les piles ne doivent pas être exposées à de forte chaleur, tel qu'à la lumière du soleil, au  
feu ou autres choses de semblable.  
18.Do not attempt to dismantle, open or repair this product yourself. If a fault occurs, seek  
advice from your local qualified service technician or contact the distributor via the  
telephone number at the back of this instruction manual.  
19.To completely disconnect the power input, the mains plug of apparatus shall be  
disconnected from the mains. The mains plug of apparatus should not be obstructed OR  
should be easily accessed during intended use  
Pour être complètement déconnecté de l'alimentation d'entrée, la prise doit être  
débranchée du secteur. La prise du secteur ne doit pas être obstruée ou doit être  
facilement accessible pendant son utilisation.  
2
 
FCC NOTICE:  
This equipment has been tested and found to comply with the limits for a Class B digital device,  
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable  
protection against harmful interference in a residential installation. This equipment generates,  
uses and can radiate radio frequency energy and, if not installed and used in accordance with  
the instructions, may cause harmful interference to radio communications.  
However, there is no guarantee that interference will not occur in a particular installation. If this  
equipment does cause harmful interference to radio or television reception, which can be  
determined by turning the equipment off and on, the user is encouraged to try to correct the  
interference by one or more of the following measures:  
– Reorient or relocate the receiving antenna.  
– Increase the separation between the equipment and receiver.  
– Connect the equipment into an outlet on a circuit different from that to which the receiver is  
needed.  
– Consult the dealer or an experienced radio/TV technician for help.  
WARNING:  
Changes or modifications to this unit not expressly approved by the party responsible for  
compliance could void the user's authority to operate the equipment.  
PROTECT YOUR FURNITURE!!  
This system is equipped with non-skid rubber ‘feet’ to prevent the product from moving when you  
operate the controls. These ‘feet’ are made from non-migrating rubber material specially formulated to  
avoid leaving any marks or stains on your furniture. However certain types of oil based furniture  
polishes, wood preservatives, or cleaning sprays may cause the rubber ‘feet’ to soften, and leave  
marks or a rubber residue on the furniture.  
To prevent any damage to your furniture we strongly recommend that you purchase small self-adhesive  
felt pads, available at hardware stores and home improvement centers everywhere, and apply these  
pads to the bottom of the rubber ‘feet’ before you place the product on fine wooden furniture.  
3
 
WELCOME  
Thank you for purchasing the JENSEN JiSS-100 Docking System.  
Before operating the unit, please read this manual thoroughly and retain it for future reference.  
LOCATION OF CONTROLS  
1.  
2.  
3.  
4.  
5.  
6.  
FUNCTION (iPod / AUX / FM / AM)  
POWER ON/OFF  
4
5
TUNING DOWN /  
30-PIN Connector  
Button  
1
6
7
8
2
3
TUN. DN  
TUN. UP  
MEMORY/PLAY/PAUSE  
PRESET EQ  
9
(ROCK / POP / JAZZ / CLASSIC)  
7.  
8.  
9.  
TUNING UP /  
Button  
VOLUME UP Button  
VOLUME DOWN Button  
10. AC POWER SOCKET  
11. Telescopic Rotating Antenna  
12. PHONES Jack  
11  
13. AUX IN Jack  
12  
13  
10  
14. Battery Door  
14  
4
 
POWER SOURCE  
This JiSS-100 Docking System operates on AC120V~ 60Hz line power or on 4 “AA” (UM-3)  
batteries (Not included). Do not attempt to operate the radio with any other power source. You  
could cause damage to the unit and void your warranty.  
Please be sure the power outlet you plug this unit into is working and receives constant  
(unswitched) power.  
A. AC Power Operation  
Insert the AC Cord into the AC cord socket located on the back of JiSS-100. Plug the other end into a  
standard 120V~ AC outlet as shown in the diagram below.  
AC Outlet  
AC Cord Inlet  
B. Battery Operation  
Note: For best performance and longer operating time, we recommend the use of alkaline-type  
batteries.  
1. Remove the BATTERY DOOR.  
2. Install 4 pieces of “AA” (UM-3) batteries (not included), according to the polarity diagram,  
inside the battery compartment.  
3. Replace the BATTERY DOOR.  
IMPORTANT: Be sure that the batteries are installed correctly.  
Wrong polarity may damage the unit and void the warranty.  
Battery Precautions  
Follow these precautions when replacing the battery in this device.  
1. Do not mix old and new batteries  
2. Do not mix alkaline, standard (carbon-zinc) or rechargeable (nickel-cadmium) batteries.  
3. Use only the size and type of battery specified.  
4. Be sure to follow the correct polarity when installing the batteries as indicated in the battery  
compartment. Reversed battery may cause damage to the device.  
5. If the device is not to be used for a long period of time, remove the battery to prevent damage or  
injury from possible battery leakage.  
6. Do not dispose of batteries in fire, batteries may explode or leak.  
Battery Replacement  
The output sound of this unit will become distorted when the batteries become weak. You need  
to replace all the exhausted batteries at the same time as soon as possible to avoid battery  
leakage.  
5
 
RADIO OPERATION  
Button to turn on the unit.  
1. Press the  
2. Press the FUNCTION Button to operate the unit in AM or FM mode.  
AM  
780  
FM  
92 6  
TO:  
PRESS:  
TUN UP/  
TUN UP/ or TUN DN/  
TUN UP/ or TUN DN/  
VOLUME or VOLUME Buttons  
EQ Button repeatedly until the desired EQ shown in the Display  
Scan radio station automatically  
or TUN DN/  
Buttons and hold for 1 second  
Buttons again  
Buttons repeatedly  
Stop auto-tuning  
Scan radio station manually  
Adjust the volume level (0~16)  
Select the EQ  
3. To turn JiSS-100 off, press the  
Button again.  
Note:  
i. When listening to an FM station, fully extend the telescopic antenna and adjust the angle to  
insure maximum reception.  
ii. Automatic tuning operation may vary depending on the broadcast signal strength and also your  
distance from the broadcast tower, so weaker stations may be skipped. Tune manually to find  
the weaker stations. With stronger stations, the tuner may stop before it reaches the optimum  
setting for that station. Adjust tuning manually for the best reception if necessary.  
iii. If FM reception is weak, try repositioning the unit near an open window or rotating the antenna  
until you get the best reception.  
iv. For best AM reception, please undock your iPod when listening to AM stations.  
v. The sound equalization can be adjusted for optimum sound reproduction depending on the style  
of music you are playing. By pressing the EQ Button, you can switch between ROCK, POP,  
JAZZ, CLASSIC, or FLAT equalization to suit your taste.  
Flat  
Rock  
POP  
JAZZ  
CLASSIC  
To Preset Channels  
The JiSS-100 is equipped with 20 preset memories each for the AM and FM band.  
1. Press the Button to turn on the unit.  
2. Press the FUNCTION Button to operate the unit in AM or FM mode.  
3. Tune to a desired station.  
4. Press and hold the MEMORY Button until the Channel Indicator “P-01” appears and flashes in the  
Display.  
ROCK  
P
-
0 1  
5. While the Channel Indicator “P-01” is flashing press the TUN UP/ or TUN DN/  
Buttons to  
select the desired preset channel.  
6. Press the MEMORY Button again to confirm when the desired preset channel appears in the  
Display.  
7. Tune to another station and repeat steps 4 to 6 to store the new station in another preset channel.  
6
 
To Receive Preset Stations  
1. Press the Button to turn on the unit.  
2. Press the FUNCTION Button to operate the unit in AM or FM mode.  
3. To listen to your desired station, press the MEMORY Button once. Preset Channel “P-01” will  
appear in the LCD.  
4. Press the TUN UP/  
or TUN DN/  
Buttons repeatedly until your desired preset channel  
appears in the LCD.  
AUX OPERATION  
You can play other music sources (iPod shuffle (1st and 2nd generation), MP3, CD or other digital audio  
player) through the speakers of JiSS-100 by connecting its AUX IN Jack to your external player’s LINE  
OUT jack or headphone jack.  
1. Plug one end of the connection cord (Not included) into the AUX IN jack on the back of JiSS-100.  
Plug the other end of the cord into your external audio player, such as an iPod shuffle, CD, MP3  
Player etc.  
2. Power on JiSS-100 and the external player.  
3. Press the FUNCTION Button to select the AUX mode.  
4. Start playing your iPod shuffle, MP3, CD or other digital audio player.  
5. Slowly adjust both the volume on JiSS-100 and the external device.  
6. Press the EQ Button repeatedly to choose the desired equalizer effect.  
7. Turn off the attached player when finish listening.  
8. Press the Button to turn JiSS-100 off and unplug the connection cord from the AUX IN jack.  
iPod ADAPTORS  
There are three iPod Adaptors included in the package for the iPod touch (2nd generation) and iPod  
nano (3rd generation & and 4th generation). It is always recommended you use the adaptor that comes  
with your iPod first. This will help maximize a custom fit for your iPod when docked.  
DOCKING YOUR iPod  
1. Select a suitable adaptor (included) or use the one comes with your iPod  
and insert it into the docking bay. Your iPod can now be inserted onto the  
iPod  
docking connector by aligning the connector on the bottom of the iPod onto  
the connector in the docking bay.  
TUN. DN  
TUN. UP  
Note : Please be careful when seating your iPod onto the dock to avoid  
damaging the 30-pin connector in the iPod or the docking system.  
2. Press the Power Button to turn on the unit.  
JAZZ  
P
3. Press the FUNCTION Button to select iPod mode.  
P
4. The iPod will start playing and charging automatically.  
7
Download from Www.Somanuals.com. All Manuals Search An-d 0Dow1nload.  
Note: The iPod will only charge when the JiSS-100 is using an AC power source.  
5. Adjust the sound level by pressing the VOLUME Buttons on the JiSS-100.  
/
Note : The volume level cannot be adjusted using the volume control on your iPod after being  
docked.  
6.  
7.  
8.  
Press the  
Press and hold the  
or  
Buttons to skip to the previous or next song.  
or Buttons to fast-backward or fast-forward during playback.  
Repeatedly press the EQ Button on JiSS-100 to choose the desired equalizer effect.  
Note : Set the EQ of your iPod to OFF so it doesn’t interfere with the EQ on this unit.  
9.  
To remove the iPod from JiSS-100, press and hold the  
Button for few seconds to switch off  
the iPod and then gently remove it from the docking connector.  
10. To turn JiSS-100 off, press the Power Button again.  
USING HEADPHONES (NOT INCLUDED)  
Inserting the plug of your headphones (not included) into the Headphone jack will enable you to listen in  
private. When using headphones, the speakers will be disconnected automatically.  
Note: READ THIS IMPORTANT INFORMATION BEFORE USING YOUR HEADPHONES  
1. Avoid extended play at very high volume as it may impair your hearing.  
2. If you experience ringing in your ears, reduce the volume or shut off your unit.  
3. Keep the volume at a reasonable level even if your headset is an open-air type designed to allow  
you to hear outside sounds. Please note that excessively high volume may still block outside  
sounds.  
CARE AND MAINTENANCE  
1. Avoid operating your unit under direct sunlight or in hot, humid or dusty places.  
2. Keep your unit away from heating appliances and sources of electrical noise such as fluorescent  
lamps or motors.  
3. Unplug the unit from the electrical power outlet immediately in case of malfunction.  
Cleaning the Unit  
To prevent fire or shock hazard, disconnect your unit from the AC power source when cleaning.  
The finish on the unit may be cleaned with a dust cloth and cared for as other furniture. Use  
caution when cleaning and wiping the plastic parts.  
If the cabinet becomes dusty wipe it with a soft dry dust cloth. Do not use any wax or polish sprays  
on the cabinet.  
If the front panel becomes dirty or smudged with fingerprints it may be cleaned with a soft cloth  
slightly dampened with a mild soap and water solution. Never use abrasive cloths or polishes as  
these will damage the finish of your unit.  
CAUTION: Never allow any water or other liquids to get inside the unit while cleaning.  
8
 
SPECIFICATIONS  
Power requirement ………………....…… AC 120V ~ 60Hz 15 W  
DC 6V, “AA” (UM-3) X 4  
Frequency Range………...………......….. AM 530 - 1710 kHz  
FM 87.5 - 108 MHz  
Power output …………………….......……1.5W x 2  
Speaker loading………………….....……. 8 Ohm x 2  
iPod is a trademark of Apple Inc., registered in the U.S. and other countries.  
"Made for iPod" means that an electronic accessory has been designed to connect specifically to iPod  
and has been certified by the developer to meet Apple performance standards.  
Apple is not responsible for the operation of this devise or its compliance with safety and regulatory  
standards.  
TROUBLESHOOTING GUIDE  
If you experience difficulties in the use of this Docking System, please check the following or call  
1-800-777-5331 for Customer Service.  
Symptom  
Possible Cause  
Solution  
AC cord is not plugged properly into a Plug the AC cord into a wall outlet and plug  
wall outlet or the connector is not  
plugged into the AC IN jack on the  
back of the unit.  
the connector into the AC IN jack on the  
unit.  
The unit does not  
respond (no power)  
Plug another device into the same out  
outlet to confirm the outlet is working.  
Make sure the dock insert is properly fit for  
Wall outlet is not functioning.  
your iPod.  
Make sure the dock insert is properly fit for  
your iPod  
iPod cannot not be  
docked properly.  
Using wrong iPod Adaptor.  
Remove your iPod from the dock and  
check for obstruction on the connectors in  
the dock and on your iPod. Then reseat it in  
the dock.  
Remove your iPod from the dock and  
check for obstruction on the connectors in  
the dock and on your iPod. Then reseat it  
on the dock.  
iPod is not installed properly.  
Your iPod is locked up.  
iPod does not respond  
to the system  
Please make sure that your iPod is working  
properly before docking into the unit.  
Please refer to your iPod manual for info on  
resetting the iPod.  
Remove your iPod from the dock and  
check for obstruction on the connectors in  
the dock and on your iPod. Then reseat it in  
the dock.  
iPod is not installed properly.  
iPod does not charge up  
iPod is locked up/ frozen.  
iPod battery has problem.  
Please make sure your iPod is working  
properly before docking into the unit.  
Please refer to your iPod manual for details  
on resetting.  
Slightly rotate the AM loop antenna position  
for the best reception.  
AM band is too noisy.  
FM band is too noisy.  
The reception at the set location is  
poor  
Move the AM loop antenna away from the  
unit to avoid interference.  
Interference from the iPod  
The reception at the set location is  
poor  
Undock the iPod  
Make sure the FM Antenna is fully  
extended and tape it onto the wall if  
required, the higher the better  
Undock the iPod  
Interference from the iPod  
9
 
90 DAY LIMITED WARRANTY AND SERVICE  
VALID IN THE U.S.A ONLY  
SPECTRA MERCHANDISING INTERNATIONAL, INC. warrants this unit to be free from defective materials or  
factory workmanship for a period of 90 days from the date of original customer purchase and provided the product  
is utilized within the U.S.A. This warranty is not assignable or transferable. Our obligation under this warranty is  
the repair or replacement of the defective unit or any part thereof, except batteries, when it is returned to the  
SPECTRA Service Department, accompanied by proof of the date of original consumer purchase, such as a  
duplicated copy of a sales receipt.  
You must pay all shipping charges required to ship the product to SPECTRA for warranty service. If the product is  
repaired or replaced under warranty, the return charges will be at SPECTRA’s expense. There are no other  
express warranties other than those stated herein.  
This warranty is valid only in accordance with the conditions set forth below:  
1. The warranty applies to the SPECTRA product only while:  
a. It remains in the possession of the original purchaser and proof of purchase is demonstrated  
b. It has not been subjected to accident, misuse, abuse, improper service, usage outside the descriptions and  
warnings covered within the owner’s manual or non-SPECTRA approved modifications  
c. Claims are made within the warranty period  
2. This warranty does not cover damage or equipment failure caused by electrical wiring not in compliance with  
electrical codes or SPECTRA owner’s manual specifications, or failure to provide reasonable care and  
necessary maintenance as outlined in the owner’s manual.  
3. Warranty of all SPECTRA products applies to residential use only and is void when products are used in a  
nonresidential environment or installed outside the United States.  
This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.  
TO OBTAIN SERVICE please remove all batteries (if any) and pack the unit carefully and send it prepaid by  
insured parcel post or UPS to SPECTRA at the address shown below. IF THE UNIT IS RETURNED WITHIN THE  
WARRANTY PERIOD shown above, please include a proof of purchase (dated cash register receipt) so that we  
may establish your eligibility for warranty service and repair of the unit without cost. Also include a note with a  
description explaining how the unit is defective. A customer service representative may need to contact you  
regarding the status of your repair, so include your name, address, phone number and e-mail address to speed  
the process.  
IF THE UNIT IS OUTSIDE THE WARRANTY PERIOD, please include a check for $30.00 to cover the cost of  
repair, handling and return postage. All out of warranty returns must be sent prepaid.  
It is recommended that you contact SPECTRA first at 1-800-777-5331 or by e-mail at [email protected] for  
updated information on the unit requiring service. In some cases the model you have may be discontinued and  
SPECTRA reserves the right to offer alternative options for repair or replacement.  
SPECTRA MERCHANDISING INTERNATIONAL, INC.  
4230 North Normandy Avenue,  
Chicago, IL60634, USA.  
1-800-777-5331  
To register your product, visit the link below on the website to enter your information.  
Printed in China  
10  
 

ION Drums Drum Rocker Core User Manual
JL Audio Car Speaker C2 525x User Manual
John Lewis Refrigerator JLBIUCL 01 User Manual
JVC DVD Player SR DVM700ER User Manual
JVC Speaker SP PW3000 User Manual
JVC Stereo System CA MXJ530R User Manual
Karcher Pressure Washer 5961 6090 User Manual
Karcher Pressure Washer K 650 MB User Manual
KitchenAid Cooktop KECC056RBL03 User Manual
Kompernass Pedicure Spa SFB 85 A1 User Manual