Jensen MP3 Docking Station JiSS 115 User Manual

Portable Docking CD Music System for iPod  
Owner’s Manual  
JiSS-115  
(iPod Not Included)  
Please read this Instruction Manual carefully before  
using the unit and retain it for future reference  
 
CD814 IPOD JENSEN IM 120V GB CUS1  
1
2010/1/12  
02:01:46  
IMPORTANT SAFETY INSTRUCTIONS  
(Continued)  
Do not defeat the safety purpose of the polarized or grounding – type plug. A polarized plug  
has two blades with one wider than the other. A grounding type plug has two blades and a third  
grounding prong. The wide blade or the third prong is provided for your safety. If the provided  
plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.  
9.  
10. Protect the power cord from being walked on or pinched particularly at plugs, convenience  
receptacles and the point where they exit from the apparatus.  
11. Only use attachments/accessories specified by the manufacturer.  
12. Use only with a cart, stand, tripod, bracket, or table specified by the  
manufacturer, or sold with the apparatus. When a cart is used, use  
caution when moving the cart/apparatus combination to avoid  
injury from tip-over.  
13. Unplug this apparatus during lightning storms or when unused for long periods of time.  
14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has  
been damaged in anyway, such as power-supply cord or plug is damaged, liquid has been  
spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or  
moisture, does not operate normally, or has been dropped.  
15. The apparatus shall not be exposed to dripping or splashing and that no objects filled with  
liquids, such as vases, shall be placed on apparatus.  
16. Main plug is used as disconnect device and it should remain readily operable during  
intended use. In order to disconnect the apparatus from the mains completely, the mains  
plug should be disconnected form the mains socket outlet completely.  
17. Battery shall not be exposed to excessive heat such as sunshine, fire or the like.  
IMPORTANT NOTE  
In case of malfunction due to electrostatic discharge, the apparatus has to be reset by disconnecting  
it from mains supply and removing all the batteries. Wait at least for 5 seconds before reconnect the  
AC power cord or reinstall the batteries.  
CAUTION:  
TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF  
PLUG TO WIDE SLOT.  
FULLY INSERT.  
AC Outlet  
AC Plug  
2
 
CD814 IPOD JENSEN IM 120V GB CUS3  
3
2010/1/12  
02:01:47  
WARNING  
CLASS 1 LASER PRODUCT  
CAUTION  
CLASS 1 LASER PRODUCT  
APPAREIL Á LASER DE CLASSE 1  
PRODUCTO LASER DE CLASE 1  
INVISIBLE LASER RADIATION  
WHEN OPEN AND INTERLOCKS  
DEFEATED  
AVOID EXPOSURE TO BEAM  
This product contains a low power laser device.  
Follow the advice below for safe operations.  
ON PLACEMENT  
Do not use the unit in places which are extremely hot, cold, dusty, or humid.  
Place the unit on a flat and even surface.  
Do not restrict the air flow of the unit by placing it in a place with poor air flow, by covering it with a  
cloth, or by placing it on a carpet.  
ON SAFETY  
When connecting and disconnecting the AC cord, grip the plug and not the cord itself. Pulling the  
cord may damage it and create hazard.  
When you are not going to use the unit for a long period of time, disconnect the AC power cord  
and remove all batteries.  
ON AC VOLTAGE  
Before use, check that the rated voltage of your unit matches your local voltage.  
ON CONDENSATION  
When left in a heated room where it is warm and damp, water droplets or condensation may form  
inside the CD player.  
When there is condensation inside the unit, the unit may not function normally.  
Let it stand for 1 to 2 hours before turning the power on, or gradually heat the room up and dry the  
unit before use.  
Should any trouble occur, disconnect the AC power cord and refer servicing to qualified  
personnel.  
3
 
CD814 IPOD JENSEN IM 120V GB CUS4  
4
2010/1/12  
02:01:47  
FCC NOTICE  
This equipment has been tested and found to comply with the limits for a Class B digital device, pursu-  
ant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against  
harmful interference in a residential installation. This equipment generates, uses and can radiate radio  
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful  
interference to radio communications.  
However, there is no guarantee that interference will not occur in a particular installation. If this equip-  
ment does cause harmful interference to radio or television reception, which can be determined by  
turning the equipment off and on, the user is encouraged to try to correct the interference by one or  
more of the following measures:  
– Reorient or relocate the receiving antenna.  
– Increase the separation between the equipment and receiver.  
– Connect the equipment into an outlet on a circuit different from that to which the receiver is needed.  
– Consult the dealer or an experienced radio/TV technician for help.  
WARNING:  
Changes or modifications to this unit not expressly approved by the party responsible for compliance  
could void the user's authority to operate the equipment.  
PROTECT YOUR FURNITURE!!  
This system is equipped with non-skid rubber ‘feetto prevent the product from moving when you operate  
the controls. These ‘feet’ are made from non-migrating rubber material specially formulated to avoid  
leaving any marks or stains on your furniture. However certain types of oil based furniture polishes,  
wood preservatives, or cleaning sprays may cause the rubber ‘feet’ to soften, and leave marks or a  
rubber residue on the furniture.  
To prevent any damage to your furniture we strongly recommend that you purchase small self-adhesive  
felt pads, available at hardware stores and home improvement centers everywhere, and apply these  
pads to the bottom of the rubber ‘feet’ before you place the product on fine wooden furniture.  
4
 
CD814 IPOD JENSEN IM 120V GB CUS5  
5
2010/1/12  
02:01:47  
WELCOME  
Thank you for purchasing JENSEN JiSS-115 Docking System.  
Before operating the unit, please read this manual thoroughly and retain it for future reference.  
LOCATION OF CONTROLS  
1.  
2.  
3.  
4.  
5.  
6.  
7.  
8.  
9.  
FUNCTION BUTTON  
POWER / STANDBY BUTTON  
VOLUME CONTROL  
CARRYING HANDLE  
CD DOOR  
6
8
10  
5
7
9
15  
11  
4
3
12  
FM STEREO INDICATOR  
LCD DISPLAY  
2
1
CD DOOR OPEN / CLOSE AREA  
13  
14  
PLAY / PAUSE  
BUTTON  
BUTTON  
BUTTON  
10. B-SKIP  
11. F-SKIP  
12. PLAY MODE BUTTON  
13. PROGRAM/CLOCK-ADJ. BUTTON  
14. STOP  
BUTTON  
22  
18  
16  
17  
17  
15. TUNING CONTROL  
16. BAND SWITCH  
21  
20  
19  
17. SPEAKER  
18. iPod CONNECTOR  
19. AC SOCKET  
20. BATTERY COMPARTMENT  
21. TELESCOPIC ANTENNA  
22. AUX. IN JACK  
GETTING STARTED  
Unpacking the Docking System  
Please save all the original packaging. It provides the safest way to transport your unit.  
POWER SOURCE  
This Portable Docking System is designed to operate on 120V~ 60Hz AC power or with 8 ‘C” size  
(UM-2) batteries (Not included).  
CAUTION:  
Mains plug should be regularly checked for any damage. If it is damaged do not operate the unit, seek  
advice from a qualified service technician or contact the distributor of this product via the telephone  
number at the back of this instruction manual.  
Do not attempt to operate the unit on any other power source as this could cause damage to the unit  
and void your warranty.  
5
 
CD814 IPOD JENSEN IM 120V GB CUS6  
6
2010/1/12  
02:01:48  
A. BATTERY OPERATION  
Note: For best performance and longer operating time, we recommend the use of alkaline-type  
batteries.  
1. Remove the Battery Door on the back of the unit.  
2. Follow the marked polarities and install 8 “C” size (UM-2) batteries.  
3. Replace the Battery Door.  
battery door  
IMPORTANT: Be sure that the batteries are installed correctly.  
Insert eight UM-2  
(size C) batteries.  
Wrong polarity may damage the unit.  
BATTERY CARE  
(a) Do not mix old and new batteries.  
(b) Do not mix alkaline, standard (carbon-zinc) or rechargeable (nickel-cadmium) batteries.  
(c) If the unit is not to be used for an extended period of time, remove all batteries. Old or leaking  
battery can cause damage to the unit and may void the warranty.  
(d) Do not dispose batteries in fire. Batteries may leak or explode.  
B. AC POWER CONNECTION  
1. Insert one end of the power cord to the AC Socket on the back of  
To AC socket  
the Docking System. The internal battery source will automatically  
be disconnected  
2. Connect the power cord to an AC 120V~ 60Hz power outlet.  
To AC outlet  
TURNING POWER ON/OFF AND SELECTING FUNCTION  
1. Turn the System to ON and OFF by pressing the POWER / STANDBY  
Button.  
STANDBY  
2. The function is selected cyclically by pressing the FUNCTION Button:  
CD  
iPod  
AUX  
TUNER  
FUNCTION  
ADJUSTING THE SOUND LEVEL  
To Adjust the Volume Level  
VOLUME  
6
 
CD814 IPOD JENSEN IM 120V GB CUS7  
7
2010/1/12  
02:01:49  
CLOCK SETTING  
The clock can only be adjusted and displayed in STANDBY mode.  
1. Press the PROGRAM / CLOCK-ADJ. Button,  
2. Press F-SKIP  
or B-SKIP  
to select 12 or 24 hour format.  
3. Press the PROGRAM / CLOCK-ADJ. Button to confirm.  
The Hour digit flashes.  
PROGRAM / CLOCK-ADJ.  
4. Press F-SKIP  
or B-SKIP  
to adjust the hour.  
5. Press the PROGRAM / CLOCK-ADJ. Button to enter when the desired hour is shown.  
The Minute digit flashes.  
6. Press F-SKIP  
or B-SKIP  
to adjust the minute.  
7. Press the PROGRAM / CLOCK-ADJ. Button again to confirm when the correct time is shown in  
the Display.  
LISTENING TO THE RADIO  
1. Press the POWER / STANDBY  
Button once to turn on the System. The LCD backlight will light.  
2. Press the FUNCTION Button to select TUNER mode.  
FUNCTION  
FM  
MHz  
3. Set the BAND SWITCH to "AM" or “FM” for the desired radio band.  
BAND  
AM  
FM  
4. Tune to your desired station by turning the TURNING CONTROL.  
The frequency of the tuned station will be displayed on the LCD Display.  
The FM STEREO Indicator will light when a FM stereo program is received.  
TUNING  
5. Adjust the Volume Control to obtain the desired sound level from the Built-in Speakers.  
6. To turn the System off, press the POWER / STANDBY  
Button again. The LCD backlight will go  
off.  
7
 
CD814 IPOD JENSEN IM 120V GB CUS8  
8
2010/1/12  
02:01:50  
TIPS FOR BEST RADIO RECEPTION  
1. To insure maximum FM tuner reception, the Telescopic Antenna should be fully extended and  
rotated to obtain the best possible station reception.  
2. The AM antenna is built into the unit. When tuning in AM reception, be sure to place the unit in a  
vertical position. To obtain the best AM reception, try repositioning the unit until the best station  
reception is obtained.  
FM  
AM  
CD PLAYER OPERATION  
Note: This CD player plays not only commercial CDs, but also self-compiled CD-R/RW discs. Do not  
attempt to play CD-ROM, CDI, VCD, DVD or computer CDs.  
Notes on CD-R/RW Discs  
Because of non-standardized format definition/production of CD-R/RW, playback quality &  
performance are not guaranteed.  
Manufacturer is not responsible for the playability of CD-R/RW due to recording conditions such as  
PC performance, writing software, media ability, etc.  
Do not attach a label or seal to either side of the CD-R/RW disc. It may cause a malfunction.  
1. Press the POWER / STANDBY  
Button once to turn on the System. The LCD backlight will light.  
2. Press the FUNCTION Button to select CD mode.  
3. Open the CD DOOR by pressing the CD DOOR where OPEN/CLOSE is shown.  
4. Carefully place an audio CD with its label side upward in the  
CD compartment and close the CD Door.  
5. The LCD Display will briefly display flashing “- -” and then the  
total number of tracks on the CD will appear in the LCD Display  
after a few seconds.  
PLAY/ PAUSE  
6. Press the PLAY/PAUSE  
Button to start playback. The Play  
Indicator “►” will light and the CD will start playing from the  
first track.  
7. Adjust the VOLUME CONTROL to obtain the desired sound level  
from the Built-in Speakers.  
TO INTERRUPT PLAYBACK  
PLAY/ PAUSE  
8. To suspend playing, press the PLAY/PAUSE  
The Play Indicator will flash.  
Button once.  
Button again.  
9. To resume playing, press the PLAY/PAUSE  
The Play Indicator “►” will light steadily in the LCD Display.  
8
 
CD814 IPOD JENSEN IM 120V GB CUS9  
9
2010/1/12  
02:01:50  
SKIPPING AND SEARCHING TRACKS  
B - SKIP  
10. You can choose to play your favorite track directly by pressing  
either the B-SKIP  
the track number of the selected track.  
11. To locate a particular passage within a track, keep the  
B-SKIP F-SKIP Buttons depressed until it is found.  
or F-SKIP  
Buttons. The LCD Display will indicate  
F - SKIP  
REPEATING PLAYBACK  
12. To repeat a particular track, press the PLAY MODE Button once. The REPEAT Indicator appears  
in the LCD Display.  
REPEAT  
13. To repeat the entire CD, press the PLAY MODE Button twice. The REPEAT ALL Indicator lights  
in the LCD Display.  
REPEAT ALL  
14. To cancel the REPEAT function, press the PLAY MODE Button two more times  
until the REPEAT / REPEAT ALL Indicator disappears from the LCD Display.  
RANDOM PLAYBACK  
15. To play the tracks in random, in Stop mode press the PLAY MODE  
Button three times. The Random Indicator “ ” will appear in the Display.  
16. Press the PLAY/PAUSE  
Button once. A track is picked at random and playback starts.  
17. To cancel the random function, press the PLAY MODE Button again.  
18. To stop playback, press the STOP Button once.  
19. When you wish to turn the System off, press the POWER / STANDBY  
Button.  
The LCD backlight goes off.  
CD PROGRAMMED PLAY  
This function allows the tracks to be played in a programmed sequence.  
NOTE: Program can only be set in STOP mode. Up to 20 tracks can be programmed.  
1. In CD stop mode, press the PROGRAM Button once. “PROGRAM” will appear and Program  
No. “P01” will appear briefly and then change to “00” and blink together with “PROGRAM” in the  
LCD Display to prompt for input.  
PROGRAM  
PROGRAM / CLOCK-ADJ.  
9
 
CD814 IPOD JENSEN IM 120V GB CUS10 10  
2010/1/12  
02:01:51  
2. Press the B-SKIP  
or F-SKIP  
Buttons to select the song to be programmed.  
For example track 5 is selected.  
3. Press the PROGRAM Button again to store the selection. The Program No. will advance to “P02”  
and then change to “00” and blink to prompt for another input.  
4. Press the B-SKIP  
or F-SKIP  
Buttons to select the next song to be programmed.  
5. Press the PROGRAM Button to store the second selection. You may repeat steps #2 - #4 to  
program as many as 20 tracks.  
6. Press the CD PLAY/PAUSE  
programmed sequence.  
Button to start playback in the  
After all the programmed tracks have been played, the player stops but the programmed tracks  
remain in the memory.  
Press the PROGRAM Button followed by the PLAY/PAUSE  
playback again.  
Button to begin programmed  
7. To cancel programmed play, in Stop mode press the STOP Button once or open the CD DOOR.  
8. To turn the System off, press the POWER / STANDBY Button. The LCD backlight will go off.  
DOCKING YOUR iPod  
1. Insert the universal adaptor for the type of iPod you will dock.  
2. To remove the adaptor to exchange for the others, press at the  
back of the adaptor and pull it upward.  
3. Press the POWER / STANDBY Button once to turn on the System.  
The LCD backlight will light.  
4. Press the FUNCTION Button to select iPod mode.  
5. Your iPod can now be inserted onto the iPod connector by aligning the connector on the bottom  
of the iPod onto the connector in the docking bay.  
Note: Please be careful when seating the iPod into the docking to avoid damaging the 30-pin  
connector on the iPod or in the Docking System.  
6. The iPod will start playing automatically and also start charging.  
Note: The iPod will only be charged when the System is powered by AC.  
7. Select the previous or next music tracks by pressing the B-SKIP  
repeatedly, and press the PLAY/PAUSE Button to play or pause.  
or F-SKIP  
Buttons  
Note: The System’s LCD cannot show any music information (e.g. song name) of your iPod.  
Please view the music information through your iPod display.  
8. Adjust the sound level using the VOLUME CONTROL.  
Note: The volume level cannot be adjusted using the volume control on your iPod after docking.  
9. To remove the iPod from the unit, press and hold the PLAY/PAUSE  
Button on the System for  
a few seconds or simply press the STOP Button once to switch off the device and then gently  
remove it from the dock connector.  
10. To turn the Docking System off, press the POWER / STANDBY Button.  
The LCD backlight will go off.  
10  
 
CD814 IPOD JENSEN IM 120V GB CUS11 11  
2010/1/12  
02:01:52  
AUX OPERATION  
You can playback your favorite music from your MP3 player or a portable digital audio player using  
the AUX IN jack.  
( Plug other  
end into  
external  
AUX.  
IN  
1. Connect the headphone jack of your external device and the  
AUX IN Jack located on the left side of this Docking System.  
(The connection cable is not included.)  
source )  
2. Press the POWER / STANDBY  
The LCD backlight will light.  
Button once to turn on the System.  
3. To enter the AUX function mode, press the FUNCTION Button to select AUX mode.  
FUNCTION  
4. Start to playing your MP3 player or other audio device.  
5. Slowly adjust both the volume controls on your Docking System and the external device.  
6. Turn off your MP3 player or other audio device etc. and unplug the AUX IN jack when finish  
listening.  
7. To turn the Docking System off, press the POWER / STANDBY Button. The LCD backlight will  
go off.  
CARE AND MAINTENANCE  
1. Avoid operating your unit under direct sunlight or in hot, humid or dusty places.  
2. Keep your unit away from heating appliances and sources of electrical noise such as fluorescent  
lamps or motors.  
3. If drop-outs or interruptions occur in the music during CD play,  
or if the CD fails to play at all, its bottom surface may require cleaning.  
Before playing, wipe the disc from the center outwards with a good soft cleaning cloth.  
4. Unplug the unit from the electrical power outlet immediately in case of malfunction.  
Cleaning the Unit  
To prevent fire or shock hazard, disconnect your unit from the AC power source when cleaning.  
The finish on the unit may be cleaned with a dust cloth and cared for as other furniture.  
Use caution when cleaning and wiping the plastic parts.  
If the cabinet becomes dusty wipe it with a soft dry dust cloth. Do not use any wax or polish sprays  
on the cabinet.  
If the front panel becomes dirty or smudged with fingerprints it may be cleaned with a soft cloth  
slightly dampened with a mild soap and water solution. Never use abrasive cloths or polishes as  
these will damage the finish of your unit.  
CAUTION: Never allow any water or other liquids to get inside the unit while cleaning.  
11  
 
CD814 IPOD JENSEN IM 120V GB CUS12 12  
2010/1/12  
02:01:53  
TROUBLESHOOTING GUIDE  
If you experience difficulties in the use of this Docking System, please check the following or call  
1-800-777-5331 for Customer Service.  
Symptom  
Possible Problem  
Solution  
Unit does not respond  
(no power)  
AC Cord is not plugged properly into Re-plug the AC Cord into the wall outlet  
a wall outlet or the connector is not and the connector into AC Socket on  
plugged into the AC Socket on the the System.  
back of the System  
Wall outlet is not functioning.  
Plug another device into the same outlet  
to confirm the outlet is working.  
Noise or sound distorted on  
AM or FM broadcast  
Station not tuned properly for  
AM or FM.  
Retune the AM or FM broadcast station.  
FM: Telescopic antenna is not fully FM: Fully extend the FM telescopic  
extended.  
antenna.  
AM: The bar antenna is not  
positioned correctly  
AM: Reposition the unit until the best  
reception is obtained.Undock your iPod.  
AM or FM no sound  
Unit not in TUNER function mode. Press Function Button to select TUNER  
Volume set at minimum  
Increase Volume  
Cannot dock iPod  
properly  
Using a wrong iPod insert  
Make sure the dock insert is the proper  
fit for your iPod.  
iPod is not installed properly.  
iPod is not installed properly.  
Your iPod software is too old  
Remove your iPod from the dock and  
check for any obstruction on the  
connectors in the dock and on your  
iPod, then reseat it in the dock.  
iPod does not respond  
to the unit.  
Remove your iPod from the dock and  
check for any obstruction on the  
connectors in the dock and on your  
iPod, then reseat it in the dock.  
Update software on your iPod. For  
details, please visit  
CD player will not play  
CD skips while playing  
Unit not in CD function mode.CD  
is installed incorrectly. It the CD is  
self-compiled, the media used may media and retest.  
Select CD function mode.Insert CD with  
label side up.Use better quality blank  
not be compatible with the player.  
Disc is dirty or scratched.  
Wipe CD with clean cloth or use  
another disc.  
Intermittent sound from  
CD Player  
Dirty or defective disc  
Dirty pick up lens  
Clean or replace the defective discUse  
a CD-lens cleaning disc to clean the  
lens  
Player is subject to excessive  
shock or vibration  
Relocate the player away from shock  
or vibration  
iPod is a trademark of Apple Inc., registered in the U.S. and other countries.  
"Made for iPod" means that an electronic accessory has been designed to connect specifically to iPod  
and has been certified by the developer to meet Apple performance standards.  
Apple is not responsible for the operation of this devise or its compliance with safety and regulatory  
standards  
12  
 
CD814 IPOD JENSEN IM 120V GB CUS13 13  
2010/1/12  
02:01:53  
90 DAY LIMITED WARRANTY AND SERVICE  
VALID IN THE U.S.A ONLY  
SPECTRA MERCHANDISING INTERNATIONAL, INC. warrants this unit to be free from defective  
materials or factory workmanship for a period of 90 days from the date of original customer purchase  
and provided the product is utilized within the U.S.A. This warranty is not assignable or transferable.  
Our obligation under this warranty is the repair or replacement of the defective unit or any part thereof,  
except batteries, when it is returned to the SPECTRAService Department, accompanied by proof of the  
date of original consumer purchase, such as a duplicated copy of a sales receipt.  
You must pay all shipping charges required to ship the product to SPECTRA for warranty service. If  
the product is repaired or replaced under warranty, the return charges will be at SPECTRA’s expense.  
There are no other express warranties other than those stated herein.  
This warranty is valid only in accordance with the conditions set forth below:  
1. The warranty applies to the SPECTRA product only while:  
a. It remains in the possession of the original purchaser and proof of purchase is demonstrated  
b. It has not been subjected to accident, misuse, abuse, improper service, usage outside the  
descriptions and warnings covered within the owner’s manual or non-SPECTRA approved  
modifications  
c. Claims are made within the warranty period  
2. This warranty does not cover damage or equipment failure caused by electrical wiring not in  
compliance with electrical codes or SPECTRA owner’s manual specifications, or failure to provide  
reasonable care and necessary maintenance as outlined in the owner’s manual.  
3. Warranty of all SPECTRA products applies to residential use only and is void when products are  
used in a nonresidential environment or installed outside the United States.  
This warranty gives you specific legal rights, and you may also have other rights which vary from state  
to state. TO OBTAIN SERVICE please remove all batteries (if any) and pack the unit carefully and  
send it prepaid by insured parcel post or UPS to SPECTRA at the address shown below. IF THE UNIT  
IS RETURNED WITHIN THE WARRANTY PERIOD shown above, please include a proof of purchase  
(dated cash register receipt) so that we may establish your eligibility for warranty service and repair  
of the unit without cost. Also include a note with a description explaining how the unit is defective. A  
customer service representative may need to contact you regarding the status of your repair, so include  
your name, address, phone number and e-mail address to speed the process.  
IF THE UNIT IS OUTSIDE THE WARRANTY PERIOD, please include a check for $25.00 to cover the  
cost of repair, handling and return postage. All out of warranty returns must be sent prepaid.  
It is recommended that you contact SPECTRArst at 1-800-777-5331 or by e-mail at [email protected] for  
updated information on the unit requiring service. In some cases the model you have may be discontinued  
and SPECTRA reserves the right to offer alternative options for repair or replacement.  
SPECTRA MERCHANDISING INTERNATIONAL, INC.  
4230 North Normandy Avenue,  
Chicago, IL60634, USA.  
1-800-777-5331  
To register your product, visit the link below on the website to enter your information.  
Printed in China  
13  
 
CD814 IPOD JENSEN IM 120V GB CUS14 14  
2010/1/12  
02:01:53  

InFocus Projector in5130 User Manual
Insignia CD Player IS PA040717 User Manual
Integra Stereo Receiver DTR 55 User Manual
JVC Ventilation Hood AV 20NX50 User Manual
Kambrook Clock Radio KCR90 User Manual
Karcher Pressure Washer K 3740 User Manual
Kenmore Vacuum Cleaner 11624194 User Manual
Kenmore Water System 6253882 User Manual
Kodak Scanner A 61195 User Manual
Kompernass Saw PPHSS 670 User Manual