Jensen Portable CD Player CD 36 User Manual

DEAR JENSEN CUSTOMER  
Selecting fine audio equipment such as the unit you've just purchased is only  
the start of your musical enjoyment. Now it's time to consider how you can  
maximize the fun and excitement your equipment offers. This manufacturer and  
the Electronic Industries Association's Consumer Electronics Group want you to  
get the most out of your equipment by playing it at a safe level. One that lets  
the sound come through loud and clear without annoying blaring or distortion  
and, most importantly, without affecting your sensitive hearing.  
MODEL CD- 36  
Sound can be deceiving. Over time your hearing "comfort level" adapts to  
higher volumes of sound. So what sounds "normal" can actually be loud and  
harmful to your hearing. Guard against this by setting your equipment at a safe  
level BEFORE your hearing adapts.  
PERSONAL CD PLAYER  
INSTRUCTION MANUAL  
To establish a safe level:  
Start your volume control at a low setting.  
Slowly increase the sound until you can hear it comfortably and clearly, and  
without distortion.  
Once you have established a comfortable sound level:  
Set the dial and leave it there.  
Taking a minute to do this now will help to prevent hearing damage or loss in  
the future. After all, we want you listening for a lifetime.  
We Want You Listening For a Lifetime  
Used wisely, your new sound equipment will provide a lifetime of fun and  
enjoyment. Since hearing damage from loud noise is often undetectable until it  
is too late, this manufacturer and the Electronic Industries Association's  
Consumer Electronics Group recommend you avoid prolonged exposure to  
excessive noise.  
Customer's Record:  
The serial number of this product is found on its bottom cover. You should note  
the serial number of this unit in the space provided as a permanent record of  
your purchase to aid in identification in the event of theft of loss.  
Model Number: CD-36  
Serial Number: ____________________  
Please read this Instruction Manual carefully before  
using the unit and retain it for future reference  
EN-1  
 
LOCATION OF CONTROLS  
POWER SOURCE  
This CD player operates on two 1.5V DC ‘AA’ size (UM-3) alkaline batteries (not  
included) or with an AC adaptor with an output of 4.5VDC/700mA (not included).  
1. LCD Display  
2. DC Power Jack  
To install batteries into the player  
3. Battery Compartment  
Cover (bottom)  
1. Open the battery compartment cover located on bottom of  
cabinet.  
2. Insert two 1.5V DC ‘AA’ size (UM-3) alkaline batteries (not  
included) into the Battery Compartment following the polarity  
markings as indicated in the compartment.  
3. Close the battery door and completely slide it back to its  
original position.  
4. Play/Pause Button  
5. Volume Control  
6. CD LID Button  
7. Headphones Jack  
8. Stop Button  
Battery care  
i. Be sure that the batteries are installed correctly. Wrong polarity may  
damage the unit.  
ii. (a) Do not mix old and new batteries.  
9. Next Button  
(b) Do not mix alkaline, standard (carbon-zinc) or rechargeable (nickel-  
cadmium) batteries.  
iii. If the unit is not to be used for an extended period of time, remove the  
batteries. Old or leaking batteries can cause damage to the unit and  
may void the warranty.  
10. Previous Button  
11. Mode Button  
12. Program Button  
13. CD Door  
iv. Never attempt to charge “Non-rechargeable” batteries.  
v. Do not dispose of batteries in fire, batteries may explode or leak.  
Using an adaptor (not included) to power the player  
1. Before connecting the adaptor to the player, make sure that the AC voltage of  
the adaptor corresponds to your local AC outlet voltage. The polarity of the  
adaptor must match to the polarity markings next to the DC jack on the player.  
2. Plug the 4.5VDC/700mA AC-DC adaptor into  
an AC outlet.  
3. Insert the DC plug into the jack on the player.  
NOTE:  
When the adaptor is connected, the batteries will be automatically  
disconnected and the player will now operate on the adaptors power.  
Once the adaptor is unplugged the player will automatically switch to  
back to battery power.  
EN-4  
EN-5  
 
Turning Power On and Off  
To turn ON and OFF, press the following buttons after a disc is inserted into the  
player.  
EARPHONES CONNECTION  
Connect the plug of the stereo earbuds (included) into the PHONES socket.  
To turn ON:  
To turn OFF : Press STOP button once for standby mode.  
Press STOP button again to turn off the power.  
Press PLAY/PAUSE  
button (playback starts)  
CAUTION  
AVOID EXCESSIVE VOLUME LEVELS FOR LONG PERIODS OF TIME  
WHEN USING THE HEADPHONES. PROLONGED USE AT HIGH LEVELS  
MAY IMPAIR YOUR HEARING.  
Do not use earphones while operating a motorized vehicle, as it  
may create a traffic hazard and is illegal in many areas.  
Auto power-off function  
When the unit is stopped (Standby mode) for approximately 30 seconds, the  
power is automatically turned off.  
To Remove the Disc  
1. Press the CD LID OPEN button to open the CD  
compartment lid.  
BASIC OPERATION  
2. Hold the edge and gently press the center pivot as  
illustrated, then pick up the disc.  
NOTE: This unit can also play 3 inch (8cm) single CDs without an adaptor. Do not  
use a CD single adaptor for these smaller discs.  
1. Press the CD LID OPEN button to release the CD lid.  
2. Insert a disc with the label side facing up.  
3. Close the CD Lid. A click will be heard when it locks into  
place.  
CAUTION: WAIT FOR THE DISC TO STOP SPINNING BEFORE SLIDING  
THE OPEN SWITCH AND OPENING THE LID.  
4. Press the PLAY/PAUSE  
button once to start playing.  
5. The display will show the total number of tracks and  
playing time. The player will then start playing the first track.  
6. Adjust the volume by turning the Volume Control.  
LCD DISPLAY INFORMATION  
When the  
button is pressed at initial start up  
The display will show “- -“ and then the total number of tracks and total playing  
time. The disc will start playing and the display will show the first track number  
and instant playing time.  
To review the total number of tracks and total playing time of the disc, press  
the STOP button once.  
Locating a Particular Track  
To skip back to the beginning of the  
Press  
Press  
once or repeatedly.  
once or repeatedly.  
current or a previous track  
To skip to the beginning of following  
tracks  
During PLAY mode  
The track number and instant playing time are displayed.  
Locating a Particular Point in a Track  
To search back at a high speed  
To search forward at a high speed  
Press & hold  
Press & hold  
During PAUSE mode  
When the track playback is paused, the playing time flashes.  
Battery Low Indicator  
A flashing battery indicator  
be changed.  
flashes in the display when the batteries need to  
EN-7  
EN-6  
 
RANDOM  
VARIOUS PLAYBACK MODES  
Enables all the tracks on the disc to be played in a Random sequence.  
NORNAL PLAYBACK  
The whole disc is played and the player will stop after the last track is finished.  
1. In STOP mode press the MODE button four times,  
RANDOM Indicator, “RND”, will be displayed.  
Every time the MODE button is pressed, the corresponding mode appears  
in the display window, in the following sequence:  
2. Press  
button. A track is selected at random and playback begins.  
3. If RANDOM mode is selected during play, “RND” will appear and flash in the  
LCD Display.  
REPEAT 1  
In stop or playback mode press the MODE Button once.  
4. Press  
begins.  
button once. “RND” stops flashing and RANDOM playback  
When shown on the LCD display, the current track on the  
disc will be repeated.  
5. Press the MODE Button again to return to normal play mode.  
REPEAT ALL  
In stop or playback mode press the MODE Button twice.  
PROGRAMMED PLAY  
When shown in the LCD display, all tracks on the disc will be  
repeated.  
Programs can be set in either the STOP or normal play mode.  
1. Press the PROG button once, PROG No. 01 appears.  
PROG and Track No. 00 start flashing in the display.  
To cancel the Repeat Function, press the MODE Button repeatedly until  
” or “ ” disappears.  
2. Press  
or  
to select the desired track.  
3. When the desired track is displayed, press the PROG button  
to register. The PROG No. changes to 02. Track No. returns to 00 and flashes  
together with PROG.  
INTRODUCTARY SCAN  
4. Repeat steps 2 and 3 to program more tracks.  
Up to 20 tracks can be programmed into the memory.  
To play the first 10 seconds of each track on the disc.  
1. In STOP mode press the MODE button three times, INTRO  
is displayed.  
5. Press  
to start the programmed play.  
6. To erase the program, in STOP mode simply press the  
button.  
2. Press  
button to start INTRO play from track number 01.  
3. If INTRO mode is selected during play, INTRO will start flashing in the display.  
Press  
Press  
Press  
button. INTRO stops flashing and INTRO play starts from track 01.  
to start INTRO play from next track.  
to start INTRO play from current track.  
To cancel INTRO play, press  
again. Playback continues on current track.  
EN-9  
EN-8  
 
TROUBLESHOOTING GUIDE  
Should you experience difficulties in the use of this player please refer to the  
following chart or call 1-800-777-5331 for Customer Service.  
PLAYER MAINTENANCE  
Cleaning the Cabinet  
Problem  
Points to Check  
Wipe with a soft cloth. If the cabinet is very dirty, dampen the cloth with a weak  
solution of neutral detergent and water, and then wipe clean.  
Disc may be inserted upside down  
Disc not mounted correctly on chuck  
Dirty or defective disc  
Dirty pick up lens  
Player lid not closed  
Cleaning the Lens  
Player fails to function  
Moisture/Condensation, allow player to warm up to  
room temperature for 60 minutes  
AC power to adaptor switched off  
Weak batteries  
A dirty lens will cause sound skipping and, if the lens is very dirty, the CD may not  
work. Never touch the lens with your finger or press down on the lens assembly.  
Damage may occur or you may scratch the lens. Open the disc cover and clean  
the lens as follows:  
Auto switch off has occurred  
Headphone plug is not firmly inserted into the Phones  
socket.  
No sound from Headphones  
Intermittent sound  
Dirty or defective disc  
Dirty pick up lens  
Player is subject to excessive vibration or shock  
Low battery power  
Dust or Dry Particles  
Using a camera lens brush/blower, blow on the lens a couple of times, wipe it  
lightly with the brush to remove dust. Then, blow on the lens once more.  
Poor Headphone connection  
DISC CLEANING AND TROUBLESHOOTING GUIDE  
SERVICE  
Cleaning the Disc  
Please refer to the instructions on the enclosed warranty card for returning your  
unit for service. When returning the unit, please remove batteries to prevent  
damage to the unit in transit and/or from possible battery leakage. We are not  
responsible for batteries returned with the product or for the cost of replacement.  
When a disc becomes dirty, clean it with a  
cleaning cloth. Wipe the disc from the  
centre out.  
Note  
Do not use solvents such as benzene petrol, thinner, commercially available  
cleaners or anti-static spray intended for analogue discs.  
Distributed by:  
SPECTRA - Merchandising International, Inc.  
Chicago Industry Tech Park  
4230 North Normandy Avenue,  
Chicago. IL 60634, U. S. A.  
Please have model number ready,  
for Customer Service, call 1-800-777-5331  
Printed in China  
EN-11  
EN-10  
 

Ingersoll Rand Marine Sanitation System 65142X XX User Manual
Intelligent Motion Systems Webcam IB462He User Manual
Jacuzzi Hot Tub X315 LH User Manual
JVC Speaker System NX G5 User Manual
Kamera Werk Dresden Digital Camera CMOS User Manual
Kenwood Two Way Radio TH 55AT7E User Manual
Keys Fitness Fitness Equipment KF1860 User Manual
Kicker Stereo Amplifier ZX5502 User Manual
KitchenAid Microwave Oven W10189714A User Manual
Kramer Electronics Switch VS 1211 User Manual