Jensen Turntable JTA230 User Manual

DEAR JENSEN® CUSTOMER  
Selecting fine audio equipment such as the unit you've just purchased is only the start of your  
musical enjoyment. Now it's time to consider how you can maximize the fun and excitement  
your equipment offers. This manufacturer and the Electronic Industries Association's  
Consumer Electronics Group want you to get the most out of your equipment by playing it at a  
safe level. One that lets the sound come through loud and clear without annoying blaring or  
distortion and, most importantly, without affecting your sensitive hearing.  
Sound can be deceiving. Over time your hearing "comfort level" adapts to higher volumes of  
sound. So what sounds "normal" can actually be loud and harmful to your hearing. Guard  
against this by setting your equipment at a safe level BEFORE your hearing adapts.  
3-SPEED STEREO TURNTABLE WITH  
BUILT-IN SPEAKERS AND  
SPEED ADJUSTMENT  
To establish a safe level:  
Start your volume control at a low setting.  
Slowly increase the sound until you can hear it comfortably and clearly, and without  
distortion.  
Once you have established a comfortable sound level:  
Set the dial and leave it there.  
Taking a minute to do this now will help to prevent hearing damage or loss in the future. After  
all, we want you listening for a lifetime.  
We Want You Listening For a Lifetime  
Used wisely, your new sound equipment will provide a lifetime of fun and enjoyment. Since  
hearing damage from loud noise is often undetectable until it is too late, this manufacturer and  
the Electronic Industries Association's Consumer Electronics Group recommend you avoid  
prolonged exposure to excessive noise.  
Customer's Record:  
The serial number of this product is found on its back cover. You should note the serial  
number of this unit in the space provided as a permanent record of your purchase to aid in  
identification in the event of theft of loss.  
USER MANUAL  
Model Number: JTA-230  
Serial Number: ____________________  
JTA-230  
PLEASE READ THIS USER MANUAL COMPLETELY BEFORE OPERATING THIS UNIT  
AND RETAIN THIS BOOKLET FOR FUTURE REFERENCE.  
1
 
IMPORTANT NOTES  
Avoid installing the unit in locations described below:  
ACCESSORIES INCLUDED  
GETTING STARTED  
-
-
-
Application CD  
USB cable  
Places exposed to direct sunlight or close to heat radiating appliances such as  
electric heaters.  
User Manual  
Places subject to constant vibration.  
Dusty, humid or moist places.  
CONNECTING THE AC POWER CORD  
1. Unwind the AC power cord fully and connect it to any convenient household 120V~ 60Hz AC  
COMPLIANCE WITH FCC REGULATIONS  
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two  
outlet  
2. Turn on the power and the Power LED indicator will light. Your system is now ready to  
play your music.  
conditions:  
(1) this device may not cause harmful interference, and  
(2) this device must accept any interference received, including interference that may cause  
undesired operation.  
CONNECTING THE USB CABLE  
1. To encode music from your records or from the Aux-in line, connect the USB Port of  
the Turntable to a suitable USB port on your computer via the USB cable provided.  
2. Please refer to CONNECTING TO A COMPUTER FOR RECORDING section of this  
manual for detail.  
NOTE : This equipment has been tested and found to comply with the limits for a Class B digital  
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable  
protection against harmful interference in a residential installation. This equipment generates,  
uses and can radiate radio frequency energy and, if not installed and used in accordance with  
the instructions, may cause harmful interference to radio communications. However, there is no  
guarantee that interference will not occur in a particular installation. If this equipment does cause  
harmful interference to radio or television reception, which can be determined by turning the  
equipment off and on, the user is encouraged to try to correct the interference by one or more of  
the following measures:  
LOCATION OF CONTROLS  
1. Dust Cover  
2. Left Speaker  
3. Pitch Adjust Control  
4. 3.5mm Headphone Jack  
5. Power LED Indicator  
6. Power On/Off Switch  
7. Auto Stop Switch  
-
-
-
Reorient or relocate the receiving antenna.  
Increase the separation between the equipment and receiver.  
Connect the equipment into an outlet on a circuit different from that to which the receiver is  
connected.  
-
Consult the dealer or an experienced radio/TV technician for help.  
8. Right Speaker  
9. Volume Control Knob  
10. Tone Control Knob  
CAUTION: Changes or modifications not expressly approved by the party  
responsible for compliance could void the user’s authority to operate  
the equipment.  
11. 45 RPM Record Adaptor  
12. 33/45/78RPM Speed Selector  
13. Tone Arm Rest/Holder  
14. Line-Out RCA Jacks (L/R)  
15. AUX-IN jack  
PROTECT YOUR FURNITURE  
16. AC Power Cord  
This model is equipped with non-skid rubber 'feet' to prevent the product from moving  
when you operate the controls. These 'feet' are made from non-migrating rubber material  
specially formulated to avoid leaving any marks or stains on your furniture. However  
certain types of oil based furniture polishes, wood preservatives, or cleaning sprays may  
cause the rubber 'feet' to soften, and leave marks or a rubber residue on the furniture. To  
prevent any damage to your furniture we strongly recommend that you purchase small  
self-adhesive felt pads, available at hardware stores and home improvement centers  
everywhere, and apply these pads to the bottom of the rubber 'feet' before you place the  
product on fine wooden furniture.  
17. USB Port For Computer Connection  
CAUTION:  
This unit should not be adjusted or repaired by anyone except qualified service  
personnel.  
4
5
 
into the Line-out Jack or Headphone Jack of your external audio device. It will  
automatically switch the unit to AUX mode.  
3. Turn on unit power and your external audio device.  
4. The volume level can now be controlled through the main unit. Operate all other  
functions on the auxiliary device as usual.  
Note:  
(1). If the Line Out Jack of your external device is connected, then you only need to  
adjust the volume control of this system. If the Headphone Jack of your external  
device is connected, then you may need to adjust both the volume control of your  
external device and the volume control of this system to find the most desirable  
volume setting.  
(2). The turntable cannot be used while using the Aux-in cord is plugged in, so be sure to  
disconnect the Aux-in cord prior to using the turntable.  
(3). Slide the POWER ON/OFF switch to turn off the system when you finish listening.  
Don't forget to switch off the power on your external device as well.  
STEREO PHONOGRAPH OPERATION  
Please Note - Before Use  
Remove the stylus protector.  
-
-
Make sure that the tone arm is unlocked and free  
to move from the tone arm rest prior to operating.  
Lock the tone arm in place again when not in use.  
Cartridge  
Stylus assembly  
1. Slide the Power On/Off switch to the On position  
2. Raise the turntable dust cover.  
3. Place a record on the turntable platter (use the 45 RPM record adaptor if you are  
playing 45 RPM records).  
4. Set the speed selector to the proper position for the record you are playing.  
5. Lift the tone arm from the rest and slowly move it over the  
record. The turntable platter will begin spinning.  
6. Place the tone arm down onto the record at the location that  
you want to play.  
7. Adjust the volume to the desired level.  
LINE OUT CONNECTION  
You can connect this unit to an external Hi-Fi / AMPLIFIER system by connecting the  
LINE OUT RCA Jacks to the auxiliary input jacks on your Hi-Fi / AMPLIFIER system with  
RCA cables (not included).  
8. At the end of record, the platter will automatically stop spinning.  
Lift the tone arm from the record and return it to the rest.  
9. To stop playing manually, lift the tone arm from the record and return it to the rest.  
Note: The Volume control on the main unit will not adjust the volume when using the  
LINE OUT.  
NOTES:  
1. Certain types of records may have an auto-stop area outside the preset limit, so  
the turntable may stop before the last track finishes. If this occurs, set the  
AUTO-STOP switch to the “OFF” position. This allows the record to play to the  
end, but please note that it will not stop automatically. You must manually raise  
the tone arm and place it back in the rest and then turn off the power to stop the  
turntable from spinning.  
USING HEADPHONES(NOT INCLUDED)  
Inserting the plug of your headphones into the Headphone jack will enable you to listen  
in private.  
READ THIS IMPORTANT INFORMATION BEFORE USING YOUR HEADPHONES  
1. Avoid extended play at very high volume as it may impair your hearing.  
2. If you experience ringing in your ears, reduce the volume or shut off your unit.  
3. Keep the volume at a reasonable level even if your headset is an open-air type designed to  
allow you to hear outside sounds. Please note that excessively high volume may still block  
outside sounds.  
2. The turntable will automatically disconnect and stop playing when a 3.5mm  
stereo aux-in cord (not included) is plugged into the Aux-in Jack on the back.  
The turntable cannot be used while using the Aux-in, so be sure to disconnect  
the Aux-in cord prior to using the turntable.  
TONE CONTROL  
CONNECTING TO A COMPUTER FOR RECORDING  
Before getting start, please install the “ AUDACITY ” recording software to your computer.  
Below is an example using a computer with Microsoft XP and the Audacity software  
installed. For other Windows OS or Mac OS, please visit Audacity website for details.  
Rotate the TONE control knob to adjust the treble level of the music you are playing.  
PITCH CONTROL  
The Pitch Control allows you to fine tune the playing speed of the record once the correct  
speed (33/45/78 RPM) is chosen. Slide the Pitch Adjust Control to slightly increase or  
decrease the speed of the turntable if necessary.  
INSTALLING THE AUDACITY SOFTWARE  
1. Insert the Audacity disc (included) into the CD drive of your computer.  
AUXILIARY INPUT  
2. Click on My computer on the desktop.  
This unit provides an auxiliary audio signal input jack for connecting external audio  
devices like MP3 players, CD players and older, non-dockable iPods (except iPod  
shuffle 3rd gen) so you can listen to your external source through the speakers of this  
system.  
1. Use an audio cable (not included) with one 3.5 mm stereo plug on each end of the  
cable.  
3. Double click CD drive to view the contents of the CD and select “Windows” under  
“Audacity” folder.  
4. Open “Windows” folder and select “Audacity 2.0 (Windows 2000, XP, Vista, 7)”.  
5. Open the folder and then double click Audacity set up icon with file name  
“audacity-win-2[1].0.exe)” to install the Audacity software according to the  
instruction, read license agreements of Audacity before installation.  
NOTE:  
2. Plug one end into the AUX-IN jack on the main unit and the other end of the cable  
Free software (AUDACITY) licensed under the GNU general public license (GPL).  
6
7
 
More information as well as open source code can be found on the provided CD or on  
4. In the Sound Recording field, click the pull down menu to select “USB Audio  
Controller” as Default device of sound recording.  
INSTALL THE USB DRIVE  
1. Use the included USB cable to connect the turntable to your computer.  
2. Your computer will detect the JTA-230 as a “USB Audio Controller” & start to install  
USB drivers for it automatically.  
3. Waiting for the installation complete until your computer shows a pop up a message  
that it is installed properly and ready to use.  
SET RECORDING INPUT LEVEL (USE WINDOWS XP COMPUTER)  
1. Click the “Start“ in the left corner of your computer  
2. Select “All Programs“ Î “Accessories” Î “Entertainment“Î “Sound Recorder“ to  
open the sound record interface.  
5. Click the Volume button under the Sound recording tab to open ”Recording  
Control“ interface;  
6. Adjust the line in volume to a level without distortion. You can play a record on the  
turntable and use the Sound Recorder to record a short clip of music for testing. The  
sound wave will show on the interface screen when recording.  
3. Select “Edit” and then click “Audio Properties“ towards the bottom of the menu to  
select “Audio properties” interface.  
RUNNING AUDACITY SOFTWARE  
Note: Please review the software license and distribution restrictions found on the  
software disc. Use of the Audacity software is subject to those conditions and restriction.  
8
9
 
For additional help with recording and editing music by using the Audacity software,  
1. Run the Audacity from the Windows start menu or double click the Audacity icon on  
your computer desktop.  
2. The Audacity main screen appears. You will find the Record, Play, Pause, Stop, Skip  
to Start and Skip to End control buttons here. Use the File, Edit, View, Transport,  
Tracks, Generate, Effect and Analyze menus from your computer screen to Save,  
Export or Edit the music.  
4. Adjust the input and output volume by sliding the Input and Output Volume bars.  
Output Volume  
Input Volume  
3. Click “Preferences” at the bottom of the Edit menu, you can set the Devices, Quality,  
and various settings here.  
5. Click the record button to start recording, left and right tracks will show on your  
computer screen. If you cannot see the sound waves appear on the Interface when  
recording, adjust the Input volume bar.  
10  
11  
 
6. Use the Audacity control panel to record or listen the music you have recorded  
- Click  
button to start recording.  
button to skip to start;  
button to skip to end;  
button to play;  
- Click the  
- Click the  
- Click the  
- Click the  
- Click the  
button to pause;  
button to stop.  
EXPORT THE MUSIC FILES TO WAV OR MP3 FORMAT  
Once you have finished recording, make sure you save your recorded music to the  
computer.  
Fig. 1  
1. Click File menu and move down to “Export” to convert the file to WAV format or MP3  
format.  
2. Click on WAV or MP3 format you want to save the music as in pull down menu of  
“Save as type” field, and you will be asked for the file name of your recorded music  
NOTE: Audacity does not export MP3 files directly. If you want to encode your recorded  
music to MP3 format, you need to download the LAME MP3 encoder either in the CD  
provided or under the page “Other Audacity Downloads for Windows” of the website  
Fig.2  
INSTALL THE MP3 ENCODER  
1. Insert the included CD into your computer and select “Audacity 2.0(Windows  
2000, XP, Vista, 7)” under “Windows” folder.  
CARE AND MAINTENANCE  
1. Avoid operating your unit under direct sunlight or in hot, humid or dusty places.  
2. Keep your unit away from heating appliances and sources of electrical noise such as  
fluorescent lamps or motors.  
2. Open the folder and select “Plug-ins”.  
3. Double click the “Lame_v3.99.3_for_windows.exe” file under “Plug-ins” folder to  
start install the program.  
3. Unplug the unit from the electrical power outlet immediately in case of malfunction.  
Note: Normally, Audacity will automatically locate the Lame file that you installed.  
However, if you change default directory of Lame program, you may need to  
manually locate it by using AudacityÆEditÆPreferenceÆLibraries and the  
click “Locate” button on computer screen to browse “lame_enc.dll” file where  
the directory you have installed. See Fig.1 & 2 below and click OK to finish  
manual installation.  
CLEANING THE UNIT  
z
z
z
z
To prevent fire or shock hazard, disconnect your unit from the AC power source  
when cleaning.  
The finish on the unit may be cleaned with a dust cloth and cared for as other  
furniture, Use caution when cleaning and wiping the plastic parts.  
If the cabinet becomes dusty wipe it with a soft dry dust cloth. Do not use any wax or  
polish sprays on the cabinet.  
If the front panel becomes dirty or smudged with fingerprints it may be cleaned with a  
soft cloth slightly dampened with a mild soap and water solution. Never use abrasive  
cloths or polishes as these will damage the finish of your unit.  
CAUTION: Never allow any water or other liquids to get inside the unit while cleaning.  
12  
13  
 
90 DAY LIMITED WARRANTY AND SERVICE  
VALID IN THE U.S.A ONLY  
TROUBLESHOOTING GUIDE  
SHOULD YOU EXPERIENCE DIFFICULTIES IN THE USE OF THIS PLAYER PLEASE REFER TO THE  
FOLLOWING CHART OR CALL 1-800-777-5331 FOR CUSTOMER SERVICE.  
SPECTRA MERCHANDISING INTERNATIONAL, INC. warrants this unit to be free from defective  
materials or factory workmanship for a period of 90 days from the date of original customer purchase and  
provided the product is utilized within the U.S.A. This warranty is not assignable or transferable. Our  
obligation under this warranty is the repair or replacement of the defective unit or any part thereof, except  
batteries, when it is returned to the SPECTRA Service Department, accompanied by proof of the date of  
original consumer purchase, such as a duplicate copy of a sales receipt.  
PROBLEM  
POSSIBLE CAUSE  
SOLUTION  
AC power cord is not plugged into a  
wall outlet or the connector is not  
plugged into the power supply jack  
on the back of the unit.  
Plug the AC power cord into a wall  
outlet and plug the connector into the  
supply jack on the unit.  
You must pay all shipping charges required to ship the product to SPECTRA for warranty service. If the  
product is repaired or replaced under warranty, the return charges will be at SPECTRA’s expense. There  
are no other express warranties other than those stated herein.  
The unit does  
not respond (no  
power).  
Plug another device into the same  
outlet to confirm the outlet is working.  
Wall outlet is not functioning.  
This warranty is valid only in accordance with the conditions set forth below:  
1. The warranty applies to the SPECTRA product only while:  
a. It remains in the possession of the original purchaser and proof of purchase is demonstrated.  
b. It has not been subjected to accident, misuse, abuse, improper service, usage outside the  
descriptions and warnings covered within the user manual or non-SPECTRA approved  
modifications.  
Slide the POWER ON/OFF switch to  
the ON position  
POWER Switch in the OFF position  
Unit is ON but  
there is low or  
no volume  
The volume Control has been  
turned all the way down  
Turn the Volume control to a higher  
output  
c. Claims are made within the warranty period.  
2. This warranty does not cover damage or equipment failure caused by electrical wiring not in compliance  
with electrical codes or SPECTRA user manual specifications, or failure to provide reasonable care and  
necessary maintenance as outlined in the user manual.  
3. Warranty of all SPECTRA products applies to residential use only and is void when products are used in  
a nonresidential environment or installed outside the United States.  
Sound is  
distorted.  
Volume level is set too high  
Decrease the volume  
This warranty gives you specific legal rights, and you may also have other rights which vary from state to  
state. TO OBTAIN SERVICE please remove all batteries (if any) and pack the unit carefully and send it  
freight prepaid to SPECTRA at the address shown below. IF THE UNIT IS RETURNED WITHIN THE  
WARRANTY PERIOD shown above, please include a proof of purchase (dated cash register receipt) so  
that we may establish your eligibility for warranty service and repair of the unit without cost. Also include a  
note with a description explaining how the unit is defective. A customer service representative may need to  
contact you regarding the status of your repair, so please include your name, address, phone number and  
email address to expedite the process.  
SPECIFICATION  
Power requirement:  
Main Unit  
AC 120V ~ 60Hz 13 Watts  
System Requirement:  
Windows 2000 / XP/ Vista/7  
Mac OS X 10.4 – 10.7.5  
IF THE UNIT IS OUTSIDE THE WARRANTY PERIOD, please include a check for $30.00 to cover the cost  
of repair, handling and return postage. All out of warranty returns must be sent prepaid.  
It is recommended that you contact SPECTRA first at 1-800-777-5331 or by email at  
[email protected] for updated information on the unit requiring service. In some cases the model  
you have may be discontinued, and SPECTRA reserves the right to offer alternative options for repair or  
replacement.  
SPECTRA MERCHANDISING INTERNATIONAL, INC.  
4230 North Normandy Avenue,  
Chicago, IL60634, USA.  
At Spectra, environmental and social responsibility is a core  
value of our business. We are dedicated to continuous  
implementation of responsible initiatives with an aim to  
conserve and maintain the environment through responsible  
recycling.  
initiatives or to find a recycler in your area.  
1-800-777-5331  
To register your product, visit the link on the website below to enter your information.  
0213  
Printed in China  
14  
15  
 

Ingersoll Rand Marine Instruments 63536X User Manual
Intel Laptop WalkAbout Computer User Manual
Intel Server SR870BN4 User Manual
Invacare Mobility Aid 6265E User Manual
Invacare Mobility Aid 1130200 User Manual
JBL Home Theater System HLS410 User Manual
JVC DVD Player XV NA7SL User Manual
Kenwood DVD VCR Combo FS450 User Manual
Kenwood Stereo System VR 8060 User Manual
Kodak Computer Accessories OL400 10 User Manual