Jet Tools Automobile Parts JSJ 10T User Manual

Operating Instructions and Parts Manual  
Long Chassis Service Jacks  
Models JSJ-3T/JSJ-5T/JSJ-10T  
WMH TOOL GROUP  
2420 Vantage Drive  
Elgin, Illinois 60123  
Ph.: 800-274-6848  
Part No. M-454430  
Revision A 8/05  
Copyright © WMH Tool Group  
 
Table of Contents  
Warranty and Service ..............................................................................................................................2  
Table of Contents ....................................................................................................................................3  
Warning...................................................................................................................................................3  
Introduction..............................................................................................................................................4  
Description ..............................................................................................................................................4  
Specifications ..........................................................................................................................................4  
Unpacking ...............................................................................................................................................5  
Assembly.................................................................................................................................................5  
Before Operation .....................................................................................................................................5  
Operation.................................................................................................................................................5  
Maintenance............................................................................................................................................5  
Replacement Parts ..................................................................................................................................6  
JSJ-3T, JSJ-5T, JSJ-10T Service Jacks...............................................................................................7  
Parts List: JSJ-3T Service Jack ............................................................................................................8  
Parts List: JSJ-5T Service Jack ..........................................................................................................10  
Parts List: JSJ-10T Service Jack ........................................................................................................12  
Warning  
1. Read and understand the entire owner’s manual before attempting assembly or operation.  
2. This jack is designed for lifting vehicles only.  
3. The vehicle owner’s manual should be consulted prior to lifting the vehicle. Lift only on areas of the  
vehicle specified by the vehicle manufacturer.  
4. The jack must be on level and solid ground with wheels of vehicle facing straight ahead.  
5. Do not overload the jack. Overloading can cause damage to or failure of the jack.  
6. No one should remain in a vehicle that is being lifted.  
7. When lifting the vehicle, be sure to place the axle on the center of the jack saddle.  
8. After lifting the vehicle, place safety stands under the axles.  
9. Never get under a vehicle that is supported only by a jack.  
10. Never move the jack while is it supporting the vehicle.  
11. When lowering the vehicle, make sure nobody is around or under the lifted vehicle. Lower slowly.  
12. Safety valve is factory adjusted and no further adjustment is required.  
13. While not in use, always keep the handle straight up and locked so that it won’t fall.  
14. Read and understand the warnings posted on the jack and in this manual. Failure to comply with all of  
these warnings may result in loss of load, damage to jack and/or personal injury or property damage.  
15. Replace the warning labels if they become obscured or removed.  
16. Use only factory replacement parts when part replacement is necessary.  
- - SAVE THESE INSTRUCTIONS - -  
3
 
Introduction  
This manual is provided by WMH Tool Group covering the safe operation and maintenance procedures  
for a JET Model JSJ Service Jack. This manual contains instructions on assembly, safety precautions,  
general operating procedures, maintenance instructions and parts breakdown. This jack has been  
designed and constructed to provide years of trouble free operation if used in accordance with  
instructions set forth in this manual. If there are any questions or comments, please contact either your  
local supplier or WMH Tool Group. WMH Tool Group can also be reached at our web site:  
Description  
The Model JSJ Service Jack is for heavy-duty automotive and truck repair and maintenance. It’s  
equipped with strong steel side plates, an extra wide swivel saddle, foot pump and locking T-bar handle.  
Hydraulic cylinder parts have been high-pressure tested at the factory, and parts at maximum stress  
points have been heat-treated. Also features a safety overload bypass system.  
Specifications  
Model Number..................................... JSJ-3T................................JSJ-5T.................................JSJ-10T  
Stock Number......................................454430............................... 454450 .................................. 454410  
Capacity (ton) ............................................... 3.........................................5..........................................10  
Minimum Height (in.).................................. 5.1.................................... 5.91.......................................6.30  
Maximum Height (in.)..............................23.62.................................. 22.05..................................... 22.05  
Overall Length (in.) .................................. 51.6................................. 55-1/2....................................60-7/8  
Overall Width (in.).................................... 12.8............................... 14-5/16....................................19-1/2  
Handle Length (in.) .................................45.28.................................. 45.28..................................... 45.28  
Net Weight (lbs.)....................................... 155..................................... 210 ........................................320  
The above specifications were current at the time this manual was published, but because of our policy of  
continuous improvement, WMH Tool Group reserves the right to change specifications at any time and  
without prior notice, without incurring obligations.  
4
 
2. Carefully position the jack under the vehicle  
with the saddle under the point of contact.  
Unpacking  
3. Pull the lock lever (31) up and push it over to  
the left until it slides into the upper slot.  
Open shipping container and check for shipping  
damage. Report any damage immediately to  
your distributor and shipping agent. Do not  
discard any shipping material until the Service  
Jack is assembled and running properly.  
4. Pump the handle (38), or use the foot pedal  
(27) to raise the vehicle.  
5. To lower the vehicle, slowly and carefully  
rotate the release valve knob (39)  
counterclockwise. Speed of descent is  
controlled by how much the knob is rotated.  
Assembly  
The numbers in parentheses refer to the item  
numbers on the parts breakdown, page 7.  
Make sure all tools and  
personnel are clear before lowering the load.  
Lower slowly.  
1. Insert the handle (38) as far as it will go into  
the handle socket (26).  
2. Tighten the hex cap screw (30) securely.  
Maintenance  
Lubricate the pin and other moving elements on  
the Lifting Arm with #2 tube grease.  
When transporting the jack, the handle can be  
removed and carried separately.  
Before Operation  
Before operating the jack, any air in the  
hydraulic system must be removed. Proceed as  
follows:  
Lubricate the pin and other moving parts of the  
Handle Assembly. Tighten any loose screws.  
Insert grease into the grease fitting on the Front  
Wheels.  
1. Open the release valve by turning the  
release valve knob (39) counter-clockwise.  
Pump the foot pedal (27) about six full  
strokes to let the air out of the hydraulic  
system.  
With saddle completely lowered and handle in  
its lowest position, remove oil plug and check oil  
level. If low, fill with hydraulic jack oil until oil is  
level with the inner cylinder as seen from the  
opening of the filler hole.  
2. Close the release valve by turning the  
release valve knob (39) clockwise as far as  
it will go.  
NOTE: Completely drain and re-fill the oil tank at  
least once a year. With saddle completely  
lowered and handle in lowest position, remove  
the oil plug. Lay the jack on its side and drain  
fluid into an appropriate container. Re-fill with  
good quality hydraulic jack oil and replace oil  
plug. Never use brake fluid or any other highly  
viscous or volatile oil.  
3. Pump the foot pedal (27) to raise the jack as  
far up as it will go. Lower the jack by  
opening the release valve (39).  
NOTE: If the jack does not immediately respond  
to the pump action, repeat steps 1 through 3.  
Always store jack in the fully lowered position  
with handle upright.  
Operation  
Do not use a saddle extender  
with this jack. Failure to comply may cause  
damage to property and/or serious injury.  
1. To raise the vehicle, make sure the release  
valve knob (39) is closed – turn it clockwise  
until resistance is felt; do not overtighten.  
5
 
Troubleshooting  
Numbers in parentheses refer to the item numbers on the parts breakdown, page 7.  
Trouble  
Probable Cause  
Remedy  
Release valve not properly closed.  
No oil in system.  
Tighten release valve knob (39).  
Fill to prescribed level.  
Remedy overload condition. Use jack with  
proper capacity for the load.  
Jack is overloaded.  
Jack will not lift.  
Release Valve (52-54) or Safety Valve  
(55-60) malfunctioning. Valve Ball not  
properly seated.  
Clean valves to remove dirt or foreign  
matter and replace oil.  
Seal/gasket worn out or defective.  
Oil level low or too high.  
Replace seal/gasket.  
Jack will only lift part  
way.  
Fill to proper level, or remove excess oil.  
Release Valve (52-54) or Safety Valve  
(55-60) malfunctioning. Valve Ball not  
properly seated.  
Inspect valves; clean and adjust seat  
surface.  
Jack will lift load, but will  
not hold.  
Seal/gasket worn out or defective.  
Release valve (52-54) not opening.  
Reservoir is overfilled.  
Replace seal/gasket.  
Clean and adjust Release Valve.  
Drain oil to proper level.  
Jack will not lower after  
unloading.  
Linkages binding.  
Clean and lubricate moving parts.  
Pump gasket (50) defective or Valves  
malfunctioning.  
Replace gasket and/or clean valves.  
Poor lift performance.  
Oil level low, or dirty oil.  
Air trapped in system.  
Fill or replace oil.  
Bleed air from system.  
Replace pump plunger.  
Replace spring.  
Pump plunger (49) bent or marred.  
Jack Spring damaged.  
Jack will not lower  
completely.  
Link section warped or deformed due to  
possible over-loading.  
Replace warped parts.  
Replacement Parts  
Replacement parts are listed on the following pages. To order parts or reach our service department, call  
1-800-274-6848 between 7:30 a.m. and 6:00 p.m. (CST), Monday through Friday. Having the Model  
Number and Serial Number of your machine available when you call will allow us to serve you quickly and  
accurately.  
6
 
JSJ-3T, JSJ-5T, JSJ-10T Service Jacks  
7
 
Parts List: JSJ-3T Service Jack  
Index No. Part No.  
Description  
Size  
Qty  
1...............JSJ3M-18................ Frame and Lift Arm Assembly...................... .........................................1  
2...............JSJ3T-2 .................. Front Wheel................................................. .........................................2  
3...............JSJ3M-16................ Flat Washer.................................................Ø 22.5 x 2mm ...................2  
4...............JSJ3M-15................ Snap Ring....................................................Ø 15mm............................2  
5...............JSJ3T-5 .................. Grease Fitting.............................................. .........................................4  
6...............JSJ3T-6 .................. Saddle......................................................... .........................................1  
7...............JSJ3M-12................ Link Rod...................................................... .........................................2  
8...............JSJ3M-11................ Link Rod Bolt............................................... .........................................2  
9...............JSJ3M-8.................. Lock Washer................................................M16 ..................................2  
10.............JSJ3M-9.................. Hex Nut .......................................................M16 ..................................2  
11.............JSJ3M-21................ Spring.......................................................... .........................................1  
12.............TS-2210161 ............ Hex Cap Screw............................................M10 x 16mm.....................1  
13.............TS-1491031 ............ Hex Cap Screw............................................M10 x 25mm.....................2  
14.............TS-2361101 ............ Lock Washer................................................M10 ..................................2  
15.............JSJ3T-15 ................ Shaft............................................................ .........................................1  
16.............JSJ3M-07................ Rear Wheel Assembly ................................. .........................................2  
17.............JSJ3M-02................ Hex Nut .......................................................M12 x 1.25mm..................4  
18.............JSJ3M-32................ Snap Ring....................................................Ø 18mm............................2  
19.............JSJ3M-33................ Shaft............................................................ .........................................1  
20.............TS-1550061 ............ Flat Washer.................................................M8 ....................................1  
21.............JSJ3T-21 ................ Pin...............................................................Ø 3 x 18mm......................2  
22.............JSJ3M-36................ Link ............................................................. .........................................2  
23.............JSJ3T-23 ................ Snap Ring....................................................Ø 12mm............................2  
24.............JSJ3T-24 ................ Pedal Pin..................................................... .........................................1  
25.............JSJ3M-26................ Spring.......................................................... .........................................1  
26.............JSJ3T-26 ................ Handle Socket ............................................. .........................................1  
27.............JSJ3M-29................ Pedal........................................................... .........................................1  
28.............JSJ3M-40................ Lock Nut......................................................M10 ..................................1  
29.............JSJ3M-41................ Flat Washer.................................................M10 ..................................2  
30.............JSJ3M-42................ Hex Bolt.......................................................M10 x 35mm.....................1  
31.............JSJ3T-31 ................ Control Rod ................................................. .........................................1  
32.............JSJ3T-32 ................ Handle Sleeve ............................................. .........................................2  
33.............JSJ3T-33 ................ Fixing Ring .................................................. .........................................1  
34.............JSJ3T-34 ................ Spring.......................................................... .........................................1  
35.............JSJ3M-53................ Flat Washer.................................................Ø 10mm............................1  
36.............JSJ3T-36 ................ Rod Joint..................................................... .........................................1  
37.............JSJ3T-137............... Cotter Pin ....................................................Ø 4 x 20mm......................1  
38.............JSJ3T-38 ................ Handle......................................................... .........................................1  
39.............JSJ3T-39 ................ Knob............................................................ .........................................1  
40.............JSJ3T-40 ................ Lock Pin ......................................................Ø 4 x 40mm......................1  
41.............JSJ3M-28................ Universal Joint Assembly............................. .........................................1  
42.............JSJ3T-42 ................ Pin...............................................................Ø 3 x 20mm......................1  
43.............JSJ3M-43................ Spring.......................................................... .........................................1  
44.............JSJ3T-44 ................ Lock Pin ......................................................Ø 3 x 18mm......................1  
45.............JSJ3T-45 ................ Release Rod................................................ .........................................1  
46.............JSJ3T-46 ................ Lock Pin ......................................................Ø 4 x 20mm......................2  
47.............JSJ3T-47 ................ Cover........................................................... .........................................1  
.................JSJ3T-200............... Hydraulic Cylinder Assembly (includes index # 48 thru 76)  
48.............JSJ3T-48 ................ Pump Plunger Pin........................................ .........................................1  
49.............JSJ3T-49 ................ Pump Plunger.............................................. .........................................1  
50.............JSJ3T-50 ................ Nylon Gasket *.............................................Ø 14mm............................2  
51.............JSJ3T-51 ................ O-Ring * ......................................................Ø 14 x 2.65mm .................2  
52.............JSJ3T-52 ................ Release Pin................................................. .........................................1  
53.............JSJ3T-53 ................ Seal *........................................................... .........................................1  
54.............SB-6MM.................. Steel Ball.....................................................Ø 6mm..............................2  
55.............SB-4MM.................. Steel Ball.....................................................Ø 4mm..............................1  
56.............JSJ3T-56 ................ Safety Valve Ball Seat ................................. .........................................1  
8
 
57.............JSJ3T-57 ................ Safety Valve Spring ..................................... .........................................1  
58.............JSJ3T-58 ................ Safety Valve Adjusting Screw ...................... .........................................1  
59.............JSJ3T-59 ................ Seal *........................................................... .........................................1  
60.............JSJ3T-60 ................ Safety Valve Screw...................................... .........................................1  
61.............JSJ3T-61 ................ Spring.......................................................... .........................................1  
62.............SB-9MM.................. Steel Ball.....................................................Ø 9mm..............................1  
63.............JSJ3T-63 ................ Spring.......................................................... .........................................1  
64.............JSJ3T-64 ................ Copper Washer ........................................... .........................................1  
65.............TS-1506011 ............ Socket Head Cap Screw..............................M12 x 20mm.....................1  
66.............JSJ3T-66 ................ Oil Filler Plug............................................... .........................................1  
67.............JSJ3T-67 ................ Oil Tank Assembly....................................... .........................................1  
68.............JSJ3T-68 ................ Snap Ring....................................................Ø 36mm............................1  
69.............JSJ3T-69 ................ O-Ring Retainer........................................... .........................................1  
70.............JSJ3T-70 ................ O-Ring * ......................................................Ø 36 x 4.6mm ...................1  
71.............JSJ3T-71 ................ Seal Washer *.............................................. .........................................1  
72.............JSJ3T-72 ................ Piston Ring.................................................. .........................................1  
73.............JSJ3T-73 ................ Ram ............................................................ .........................................1  
74.............JSJ3T-74 ................ Bushing ....................................................... .........................................2  
75.............JSJ3T-75 ................ O-Ring * ......................................................Ø 43 x 3.55mm .................1  
76.............JSJ3T-76 ................ Snap Ring.................................................... .........................................1  
.................JSJ3T-RK ............... Repair Kit for JSJ-3T.................................... ...........................................  
NOTE: Items marked with an asterisk (*) are included in the Repair Kit.  
9
 
Parts List: JSJ-5T Service Jack  
Index No. Part No.  
Description  
Size  
Qty  
1...............JSJ5M-18................ Frame and Lift Arm Assembly...................... .........................................1  
2...............JSJ5T-2 .................. Front Wheel................................................. .........................................2  
3...............JSJ5M-16................ Flat Washer.................................................Ø 22.5 x 2mm ...................2  
4...............JSJ5M-15................ Snap Ring....................................................Ø 19mm............................4  
5...............JSJ3T-5 .................. Grease Fitting.............................................. .........................................3  
6...............JSJ5T-6 .................. Saddle......................................................... .........................................1  
7...............JSJ5M-12................ Link Rod...................................................... .........................................2  
8...............JSJ5M-11................ Link Rod Bolt............................................... .........................................2  
9...............JSJ5M-8.................. Lock Washer................................................M20 ..................................2  
10.............JSJ5M-9.................. Hex Nut .......................................................M20 ..................................2  
11.............JSJ5M-21................ Spring.......................................................... .........................................1  
12.............TS-2210161 ............ Hex Cap Screw............................................M10 x 16mm.....................1  
13.............TS-1491031 ............ Hex Cap Screw............................................M10 x 25mm.....................2  
14.............TS-2361101 ............ Lock Washer................................................M10 ..................................2  
15.............JSJ5T-15 ................ Shaft............................................................ .........................................1  
16.............JSJ5T-16 ................ Rear Wheel Assembly ................................. .........................................2  
17.............JSJ3M-02................ Hex Nut .......................................................M12 x 1.25mm..................4  
18.............JSJ3M-32................ Snap Ring....................................................Ø 18mm............................2  
19.............JSJ5M-33................ Shaft............................................................ .........................................1  
20.............TS-1550061 ............ Flat Washer.................................................M8 ....................................1  
21.............JSJ3T-21 ................ Pin...............................................................Ø 3 x 18mm......................2  
22.............JSJ5M-36................ Link ............................................................. .........................................2  
23.............JSJ3T-23 ................ Snap Ring....................................................Ø 12mm............................2  
24.............JSJ3T-24 ................ Pedal Pin..................................................... .........................................1  
25.............JSJ3M-26................ Spring.......................................................... .........................................1  
26.............JSJ3T-26 ................ Handle Socket ............................................. .........................................1  
27.............JSJ3M-29................ Pedal........................................................... .........................................1  
28.............JSJ3M-40................ Lock Nut......................................................M10 ..................................1  
29.............JSJ3M-41................ Flat Washer.................................................M10 ..................................2  
30.............JSJ3M-42................ Hex Cap Screw............................................M10 x 35mm.....................1  
31.............JSJ3T-31 ................ Control Rod ................................................. .........................................1  
32.............JSJ3T-32 ................ Handle Sleeve ............................................. .........................................2  
33.............JSJ3T-33 ................ Fixing Ring .................................................. .........................................1  
34.............JSJ3T-34 ................ Spring.......................................................... .........................................1  
35.............JSJ3M-53................ Flat Washer.................................................Ø 10mm............................1  
36.............JSJ3T-36 ................ Rod Joint..................................................... .........................................1  
37.............JSJ3T-137............... Cotter Pin ....................................................Ø 4 x 20mm......................1  
38.............JSJ3T-38 ................ Handle......................................................... .........................................1  
39.............JSJ3T-39 ................ Knob............................................................ .........................................1  
40.............JSJ3T-40 ................ Lock Pin ......................................................Ø 4 x 40mm......................1  
41.............JSJ10M-28.............. Universal Joint Assembly............................. .........................................1  
42.............JSJ3T-42 ................ Pin...............................................................Ø 3 x 20mm......................1  
43.............JSJ3M-43................ Spring.......................................................... .........................................1  
44.............JSJ3T-44 ................ Lock Pin ......................................................Ø 3 x 18mm......................1  
45.............JSJ3T-45 ................ Release Rod................................................ .........................................1  
46.............JSJ3T-46 ................ Lock Pin ......................................................Ø 4 x 20mm......................2  
47.............JSJ5T-47 ................ Cover........................................................... .........................................1  
.................JSJ5T-200............... Hydraulic Cylinder Assembly (includes index #48 thru 76)  
48.............JSJ3T-48 ................ Pump Plunger Pin........................................ .........................................1  
49.............JSJ3T-49 ................ Pump Plunger.............................................. .........................................1  
50.............JSJ3T-50 ................ Nylon Gasket *.............................................Ø 14mm............................2  
51.............JSJ3T-51 ................ O-Ring * ......................................................Ø 14 x 2.65mm .................2  
52.............JSJ3T-52 ................ Release Pin................................................. .........................................1  
53.............JSJ3T-53 ................ Seal *........................................................... .........................................1  
54.............SB-6MM.................. Steel Ball.....................................................Ø 6mm..............................2  
55.............SB-4MM.................. Steel Ball.....................................................Ø 4mm..............................1  
56.............JSJ3T-56 ................ Safety Valve Ball Seat ................................. .........................................1  
10  
 
57.............JSJ3T-57 ................ Safety Valve Spring ..................................... .........................................1  
58.............JSJ3T-58 ................ Safety Valve Adjusting Screw ...................... .........................................1  
59.............JSJ3T-59 ................ Seal *........................................................... .........................................1  
60.............JSJ3T-60 ................ Safety Valve Screw...................................... .........................................1  
61.............JSJ3T-61 ................ Spring.......................................................... .........................................1  
62.............SB-9MM.................. Steel Ball.....................................................Ø 9mm..............................1  
63.............JSJ3T-63 ................ Spring.......................................................... .........................................1  
64.............JSJ3T-64 ................ Copper Washer ........................................... .........................................1  
65.............TS-1506011 ............ Socket Head Cap Screw..............................M12 x 20mm.....................1  
66.............JSJ3T-66 ................ Oil Filler Plug............................................... .........................................1  
67.............JSJ5T-67 ................ Oil Tank Assembly....................................... .........................................1  
68.............JSJ5T-68 ................ Snap Ring....................................................Ø 40mm............................1  
69.............JSJ5T-69 ................ O-Ring Retainer........................................... .........................................1  
70.............JSJ5T-70 ................ O-Ring * ......................................................Ø 46.2 x 5.7mm ................1  
71.............JSJ5T-71 ................ Seal Washer *.............................................. .........................................1  
72.............JSJ5T-72 ................ Piston Ring.................................................. .........................................1  
73.............JSJ5T-73 ................ Ram ............................................................ .........................................1  
74.............JSJ5T-74 ................ Bushing ....................................................... .........................................2  
75.............JSJ5T-75 ................ O-Ring * ......................................................Ø 51.5 x 4.6mm ................1  
76.............JSJ5T-76 ................ Snap Ring.................................................... .........................................1  
.................JSJ5T-RK ............... Repair Kit for JSJ-5T.................................... ...........................................  
NOTE: Items marked with an asterisk (*) are included in the Repair Kit.  
11  
 
Parts List: JSJ-10T Service Jack  
Index No. Part No.  
Description  
Size  
Qty  
1...............JSJ10M-18.............. Frame and Lift Arm Assembly...................... .........................................1  
2...............JSJ10T-2 ................ Front Wheel................................................. .........................................2  
3...............JSJ10M-16.............. Flat Washer.................................................Ø 22.5 x 2mm ...................2  
4...............JSJ10M-15.............. Snap Ring....................................................Ø 19mm............................4  
5...............JSJ3T-5 .................. Grease Fitting.............................................. .........................................3  
6...............JSJ10T-6 ................ Saddle......................................................... .........................................1  
7...............JSJ10M-12.............. Link Rod...................................................... .........................................2  
8...............JSJ10M-11.............. Link Rod Bolt............................................... .........................................2  
9...............JSJ5M-8.................. Lock Washer................................................M20 ..................................2  
10.............JSJ5M-9.................. Hex Nut .......................................................M20 ..................................2  
11.............JSJ10M-21.............. Spring.......................................................... .........................................1  
12.............TS-2210161 ............ Hex Cap Screw............................................M10 x 16mm.....................1  
13.............TS-1491031 ............ Hex Cap Screw............................................M10 x 25mm.....................2  
14.............TS-2361101 ............ Lock Washer................................................M10 ..................................2  
15.............JSJ10T-15............... Shaft............................................................ .........................................1  
16.............JSJ10T-16............... Rear Wheel Assembly ................................. .........................................2  
17.............TS-154010 .............. Hex Nut .......................................................M16 ..................................2  
17A...........TS-2361161 ............ Lock Washer (not shown) ............................M16 ..................................2  
18.............JSJ3M-32................ Snap Ring....................................................Ø 18mm............................2  
19.............JSJ10M-33.............. Shaft............................................................ .........................................1  
20.............TS-1550061 ............ Flat Washer.................................................M8 ....................................1  
21.............JSJ3T-21 ................ Pin...............................................................Ø 3 x 18mm......................2  
22.............JSJ10M-36.............. Link ............................................................. .........................................2  
23.............JSJ3T-23 ................ Snap Ring....................................................Ø 12mm............................2  
24.............JSJ3T-24 ................ Pedal Pin..................................................... .........................................1  
25.............JSJ10M-26.............. Spring.......................................................... .........................................1  
26.............JSJ3T-26 ................ Handle Socket ............................................. .........................................1  
27.............JSJ3M-29................ Pedal........................................................... .........................................1  
28.............JSJ3M-40................ Lock Nut......................................................M10 ..................................1  
29.............JSJ3M-41................ Flat Washer.................................................M10 ..................................2  
30.............JSJ3M-42................ Hex Cap Screw............................................M10 x 35mm.....................1  
31.............JSJ3T-31 ................ Control Rod ................................................. .........................................1  
32.............JSJ3T-32 ................ Handle Sleeve ............................................. .........................................2  
33.............JSJ3T-33 ................ Fixing Ring .................................................. .........................................1  
34.............JSJ3T-34 ................ Spring.......................................................... .........................................1  
35.............JSJ3M-53................ Flat Washer.................................................Ø 10mm............................1  
36.............JSJ3T-36 ................ Rod Joint..................................................... .........................................1  
37.............JSJ3T-137............... Cotter Pin ....................................................Ø 4 x 20mm......................1  
38.............JSJ3T-38 ................ Handle......................................................... .........................................1  
39.............JSJ3T-39 ................ Knob............................................................ .........................................1  
40.............JSJ3T-40 ................ Lock Pin ......................................................Ø 4 x 40mm......................1  
41.............JSJ10M-28.............. Universal Joint Assembly............................. .........................................1  
42.............JSJ3T-42 ................ Pin...............................................................Ø 3 x 20mm......................1  
43.............JSJ3M-43................ Spring.......................................................... .........................................1  
44.............JSJ3T-44 ................ Lock Pin ......................................................Ø 3 x 18mm......................1  
45.............JSJ3T-45 ................ Release Rod................................................ .........................................1  
46.............JSJ3T-46 ................ Lock Pin ......................................................Ø 4 x 20mm......................2  
47.............JSJ10T-47............... Cover........................................................... .........................................1  
.................JSJ10T-200............. Hydraulic Cylinder Assembly (includes index # 48 thru 76)  
48.............JSJ10T-48............... Pump Plunger Pin........................................ .........................................1  
49.............JSJ10T-49............... Pump Plunger.............................................. .........................................1  
50.............JSJ10T-50............... Nylon Gasket *.............................................Ø 15mm............................2  
51.............JSJ10T-51............... O-Ring * ......................................................Ø 15 x 2.65mm .................2  
52.............JSJ3T-52 ................ Release Pin................................................. .........................................1  
53.............JSJ3T-53 ................ Seal *........................................................... .........................................1  
54.............SB-6MM.................. Steel Ball.....................................................Ø 6mm..............................2  
55.............SB-4MM.................. Steel Ball.....................................................Ø 4mm..............................1  
12  
 
56.............JSJ3T-56 ................ Safety Valve Ball Seat ................................. .........................................1  
57.............JSJ3T-57 ................ Safety Valve Spring ..................................... .........................................1  
58.............JSJ3T-58 ................ Safety Valve Adjusting Screw ...................... .........................................1  
59.............JSJ3T-59 ................ Seal *........................................................... .........................................1  
60.............JSJ3T-60 ................ Safety Valve Screw...................................... .........................................1  
61.............JSJ3T-61 ................ Spring.......................................................... .........................................1  
62.............SB-9MM.................. Steel Ball.....................................................Ø 9mm..............................1  
63.............JSJ3T-63 ................ Spring.......................................................... .........................................1  
64.............JSJ3T-64 ................ Copper Washer ........................................... .........................................1  
65.............TS-1506011 ............ Socket Head Cap Screw..............................M12 x 20mm.....................1  
66.............JSJ3T-66 ................ Oil Filler Plug............................................... .........................................1  
67.............JSJ10T-67............... Oil Tank Assembly....................................... .........................................1  
68.............JSJ10T-68............... Snap Ring....................................................Ø 48mm............................1  
69.............JSJ10T-69............... O-Ring Retainer........................................... .........................................1  
70.............JSJ10T-70............... O-Ring * ......................................................Ø 53 x 5.3mm ...................1  
71.............JSJ10T-71............... Seal Washer *.............................................. .........................................1  
72.............JSJ10T-72............... Piston Ring.................................................. .........................................1  
73.............JSJ10T-73............... Ram ............................................................ .........................................1  
74.............JSJ10T-74............... Bushing ....................................................... .........................................2  
75.............JSJ10T-75............... O-Ring * ......................................................Ø 61.5 x 5.3mm ................1  
76.............JSJ10T-76............... Snap Ring.................................................... .........................................1  
.................JSJ10T-RK.............. Repair Kit for JSJ-10T.................................. ...........................................  
NOTE: Items marked with an asterisk (*) are included in the Repair Kit.  
13  
 
WMH Tool Group  
2420 Vantage Drive  
Elgin, Illinois 60123  
Phone: 800-274-6848  
14  
 
WMH Tool Group  
2420 Vantage Drive  
Elgin, Illinois 60123  
Phone: 800-274-6848  
15  
 
WMH Tool Group  
2420 Vantage Drive  
Elgin, Illinois 60123  
Phone: 800-274-6848  
16  
 

Jet Tools Cordless Saw HBVS 7MW User Manual
JVC Camcorder NAB 2007 User Manual
JVC CD Player KD G110 User Manual
JVC Laptop MP XV841DE User Manual
Kidde Carbon Monoxide Alarm 1275CA User Manual
King Canada Saw KC 162SSC User Manual
KitchenAid Cooktop KGRT607HBL5 User Manual
Klipsch MP3 Docking Station SXT User Manual
Kodak Digital Camera C503 User Manual
Kompernass Sander PSS 260 User Manual