Kambrook Hair Clippers KHC100 User Manual

Hair Clipper Kit  
KHC100  
Issue 1/07  
 
Do not pull, twist or wrap the power cord  
around the casing, when using or storing the hair  
clipper. Periodically check the cord for signs of  
wear.  
featureS of your KambrooK HaIr ClIpper  
KambrooK Safety  
read all InStruCtIonS  
before operatIng and Save  
for future referenCe  
Adjustable blade  
control lever for  
close trimming  
and finishing off  
Blade guard – protects  
blade when not in use  
Do not operate the hair clipper if it has been  
dropped or damaged in any manner.  
Welcome to Kambrook and your new Hair  
Clipper Kit.  
(particularly around  
the neck and ears)  
regularly inspect the power cord, plug  
and actual appliance for any damage. If  
found damaged in any way, immediately  
cease use of the appliance and return  
the entire appliance to the nearest  
authorised Kambrook Service Centre for  
examination, replacement or repair.  
At Kambrook we believe that the safe  
performance of our products is the first priority  
in any consumer product so that you, our valued  
customer, can confidently use and trust our  
products.  
We ask that any electrical appliance that you use  
be operated in a sensible fashion with due care  
and attention placed on the following important  
operating instructions:  
please call 1300 139 798 for service  
centre details.  
Easy hold grip  
On/Off switch  
Never drop or insert any object into any opening,  
as this may cause an electrical hazard.  
Barber’s scissors with  
stainless steel blades  
Ensure that the power source to be used is the  
same as the voltage requirements of the product.  
Always switch the hair clipper OFF before putting  
down on any surface.  
Never immerse the power cord or the appliance  
in any form of liquid and do not use near bath  
tubs, basins or other vessels containing water.  
To avoid injury, do not use the hair clipper with a  
damaged or broken comb nor with teeth missing  
from the blades.  
This appliance is not intended to use by young  
children or infirm persons without supervision.  
Use the hair clipper only as described in this  
instruction book. The use of attachments not  
recommended by the manufacturer may cause a  
hazard.  
Blade brush – for  
cleaning the cutting  
blades after use  
Young children should be supervised to ensure  
that they do not play with this appliance.  
This hair clipper is for household use only, and  
not for animal clipping or shearing.  
Keep blades regularly oiled and clean blades after  
each use.  
Barber’s comb – for  
precise cutting control  
The hair clipper may be plugged into any  
230/240V power outlet. It should not be left  
unattended when plugged in.  
If the appliance is connected to an extension  
cord or power board then the extension cord or  
power board should be positioned so that it is  
not subject to splashing or contact with moisture.  
Lubricating oil  
– keeps blades in  
optimal condition  
Always switch the hair clipper off then switch off  
and unplug from the power outlet when not in  
use and before cleaning.  
The installation of a residual current (RCD)  
is recommended to provide additional safety  
protection when using electrical appliances.  
It is also advisable that an RCD with a rated  
residual operating current not exceeding 30mA  
be installed in the electrical circuit supplying the  
bathroom. Consult with your electrician for  
professional advise.  
Disconnect by gripping the plug and do not pull  
the cord.  
Do not place or store the hair clipper where it  
can fall or be pulled into a bath tub or sink. If the  
hair clipper falls into water, unplug it immediately.  
Do not reach into the water.  
The hair clipper has arcing or sparking parts  
inside. Do not use in areas where petrol, paints,  
aerosols, oxygen or other inflammable substances  
are used or stored.  
Trim guide #1  
for short hair  
Trim guide #2  
for medium hair  
Trim guide #3  
for medium  
- long hair  
Trim guide #4  
for longer hair  
Keep the power cord and unit away from hot or  
heated surfaces.  
 
against the hair with the teeth of the attachment  
comb pointing up but flat against the head. Slowly  
lift the hair clipper up and outward through  
the hair, cutting only a small amount at a time.  
(Diagram A-1)  
1. Always cut from the back of the neck to the  
crown, using the longest attachment comb.  
Holding it flat against the head, slowly move the  
hair clipper up from the hair. (Diagram C-1)  
adjuStable lever  
CloSe  
uSIng your KambrooK HaIr  
ClIpper  
before uSe  
2. Use the same technique for the sides, cutting  
from the bottom to the upper side of the head.  
Before starting to cut your hair, follow these  
simple steps . . .  
3. Repeat around sides and back of head. (Diagram  
A-2 & A-3)  
3. From the front to the crown, cut the hair  
against the direction in which it grows. Then  
even it up with the sides. (Diagram C-2)  
1. Make sure the blades are clean and well oiled.  
Unwind the cord to its full length, ensure that the  
on/off switch is in the OFF position, and plug the  
clipper into a 230/240V power outlet. You may  
then proceed to turn the power on.  
4. If you desire a shorter cut, either change to a  
lower number attachment comb or apply more  
pressure and less lift away from the head with the  
attachment comb already in use.  
long  
4. To taper hair down to the neckline, use closer  
cutting attachment combs. Comb hair, check for  
uneven spots and outline sideburns and neckline.  
(Diagram C-3)  
5. For the top of the head, you will give a fairly  
short cut if you use the #4 attachment comb.  
With the teeth flat against the head, slowly start  
trimming from the front to the back (Diagram A-4)  
2. Place a towel around the neck of the person  
who’s hair is being cut to prevent hair from falling  
inside the shirt collar.  
The adjustable lever adds versatility to your hair  
clipper by allowing you to gradually adjust the  
closeness of your cut without using an attachment  
comb.  
5. If a short tapered cut on the sides and back is  
desired, follow the diagram below and change  
attachments as illustrated. (Diagram C-4)  
3. Position the person in a chair so that his/her  
head is at your eye level  
outlining  
When the lever is in the uppermost position, the  
blade will give you the closest cut. To increase the  
cutting length, push the lever downward gradually.  
maIntaInIng your KambrooK  
HaIr ClIpper  
4. Comb the hair to remove all the tangles and  
hold the clipper in a relaxed, comfortable grip to  
help you maintain accurate cutting control.  
The lever extends the variety of lengths that can be  
achieved with each attachment comb, by using the  
varying cutting edges with each attachment comb.  
CleanIng  
After you have finished using your hair clipper,  
rapidly move the adjustable lever up and down  
a couple of times while the hair clipper is still  
running to remove any hair that may be caught in  
between the blades. Switch off the appliance and  
power outlet. Then, unplug your hair clipper and  
clean the blades with the brush supplied.  
5. Ensure that the blades are free of any hair  
clippings and that they are well oiled (see  
maintaining your Kambrook Clipper on page 5).  
b-1  
b-2  
attaCHment CombS  
1. Outlining requires no attachment comb. Take  
the hair clipper and push the lever up to the close  
– cut position (see “adjustable lever”)  
Attachment combs should be fitted to the hair  
clipper by placing the top edge (comb edge) of  
the attachment comb over the top of the cutting  
blades.  
Take special note of the following tips to ensure  
you achieve the best cut possible….  
1. For Uniform cutting, never push or force the  
hair clipper through the hair at a fast speed. The  
hair clipper works most efficiently when it runs at  
its own speed.  
2. Comb hair into the style. Position hair clipper  
between the side burns and the ear. (Diagram B-1)  
oIlIng  
Gently lift the tab at the other end of the  
attachment comb and push down until a click is  
heard.  
To maintain the hair clipper in peak condition,  
the blades should be regularly oiled before,  
during and after every haircut. A substitute/  
replacement for the clipper oil supplied in the kit  
is household sewing machine oil.  
3. Make sure the corner edge of the blade is up  
against the hairline. With the outline of the hair  
as your guide, slowly move the hair clipper over,  
around and behind the ears. (Diagram B-2)  
2. Initially cut only a small amount of hair until  
you become accustomed to the length each  
attachment leaves the hair.  
NOTE: Do not use hair oil, grease, oil mixed with  
kerosene or solvent, as these may slow down the  
motion of the blade.  
4. For the back of the neck and side burns, hold the  
clipper up side down, and holding it against the skin  
at the length desired, move downwards.  
3. The entire procedure requires practice and it is  
suggested to try the longest attachment comb on  
their hair clipper first. Then use the shorter one  
if a shorter length is desired.  
To oil the blades, gently squeeze a few drops of  
oil between the blade teeth and turn the clipper  
on, checking that the clipper is running smoothly.  
Short Cuts  
CuttIng your HaIr  
medium to long Cut (with attachment  
combs)  
Attachment Comb #1  
leaves hair approximately 3mm (1/8”) in length  
C-1  
C-2  
C-3  
Attachment Comb #2  
leaves hair approximately 6mm (1/4”) in length  
Attachment Comb #3  
leaves hair approximately 9mm (3/8”) in length  
a-1  
a-2  
a-3  
a-4  
1. Begin by combing your hair in its natural  
direction.  
If the blades are dulled and have stopped cutting,  
replace them with new blades from your nearest  
Kambrook service centre.  
Attachment Comb #4  
leaves hair approximately 12mm (1/2”) in length  
2. Place the largest attachment comb onto the  
hair clipper and start by trimming the sides from  
the bottom upwards. Hold the hair clipper lightly  
C-4  
 
notes  
KambrooK 12 montH replaCement Warranty  
If the product includes one or a number of  
accessories only the defective accessory  
or product will be replaced. In the event of  
Kambrook choosing to replace the appliance,  
the guarantee will expire at the original  
date, i.e. 12 months from the original date of  
purchase.  
Kambrook warrants the purchaser against  
defects in workmanship and material for a  
period of 12 months from the date of purchase  
(3 months commercial use).  
Guarantee and purchase receipt for this  
product are to be retained as proof of  
purchase and must be presented if making a  
claim under the Kambrook guarantee.  
In Australia, this KAMBROOK Guarantee is  
additional to the conditions and guarantees  
which are mandatory as implied by the Trade  
Practises Act 1974 and State and Territory  
legislation.  
Kambrook reserves the right to replace or  
repair the appliance within the warranty  
period,  
Warranty does not apply to any defect,  
deterioration, loss, injury or damage  
occasioned by, or as a result of the misuse  
or abuse, negligent handling or if the product  
has not been used in accordance with the  
instructions. The guarantee excludes breakages  
and consumable items such as kneading blades.  
For service, spare parts or product information  
in Australia, please call KAMBROOK on the  
Customer Service Line; 1300 139 798.  
For service, spare parts or product information  
in New Zealand, please call KAMBROOK New  
Zealand; 0800 273 845. For spare parts phone  
0800 273 845.  
This warranty is void if there is evidence of the  
product being tampered with by unauthorised  
persons.  
If claiming this guarantee the product must be  
returned freight prepaid.  
Attach a copy of the purchase receipt here.  
KambrooK 12 montH  
replaCement Warranty  
YOUR PURCHASE RECORD (Please complete)  
DATE OF PURCHASE ___________________  
MODEL NUMBER ______________________  
SERIAL NUMBER ______________________  
PURCHASED FROM ____________________  
(Please don’t return purchase record until  
you are making a claim)  
Kambrook - australia  
461 Plummer Street, Port Melbourne, 3207, Australia  
Customer Service Line 1300 139 798  
Customer Service Fax 1800 621337  
Kambrook - new Zealand  
Private Bag 94411, Greenmount, Auckland, New Zealand  
Customer Service Line/Spare Parts 09 271 3980  
Customer Service Fax 0800 288 513  
Due to continual improvement in design or otherwise, the product you purchase may differ slightly from the illustration in this book. Issue 1/07  
 

Indesit Washer WDG1195WG User Manual
ION Turntable IPTUSB User Manual
JBL Stereo Equalizer SDEC 4000 User Manual
Johnson Hardware Door 100MD User Manual
JVC Home Theater System TH C9 User Manual
Kalorik Water Heater USK JK 32207 User Manual
Kenwood Home Security System NX 410 User Manual
KitchenAid Refrigerator KBLS19KTSS00 User Manual
Kobe Range Hoods Ventilation Hood RA3830SQD User Manual
Kodak Digital Camera CD44 User Manual