DIGITAL CLOCK RADIO
LOCATION O F CONTROLS
OPERATION INSTRUCTION
CR-308
WARNING
EXPLANATION OF GRAPHICAL SYMBOLS:
1. SET/MEMORY Knob
10. ALARM2 Knob
The lightning flash with an
arrowhead symbol, within the
equilateral triangle, is intended to
alert the user to the presence of
uninsulated "dangerous voltage"
within the product's enclosure that
may be of sufficient magnitude to
constitute an electric shock to
persons.
2. POWER (ON/OFF) Knob 11. H...TIME SET...M
WARNING
3. BAND Knob
(Hour/Minute)
/TUNING Control
12. SLEEP Knob
13. DIMMER Knob
14. ALARM1 Knob
15. RESET Knob
16.VOLUME Control
RISK OF ELECTRIC SHOCK
DO NOT OPEN
4. SNOOZE Knob
5. BUZZER/RADIO Switch
6. PRESET (+) Knob
7. PRESET (-) Knob
8. DISPLAY
"WARNING: TO REDUCE THE RISK
OF ELECTRIC SHOCK, DO NOT
REMOVE COVER (OR BACK). NO
USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL."
The exclamation point within the
equilateral triangle is intended to
alert the user to the presence of
important
operating
and
maintenance (servicing) instructions
in the literature accompanying the
appliance.
WARNING: TO PREVENT FIRE OR SHOCK HAZARD,
DO NOT EXPOSE THIS APPLIANCE TO RAIN
OR MOISTURE.
9. COLORS Knob
3
PRECAUTION
Follow the advice below for safe and appropriate operation.
ON PLACEMENT
CLOCK SETTING
• The clock display and adjustment must be in radio off.
1. Connect AC power, the clock digital will
indicate on screen.
• Check that the rated voltage of your
unit matches your local voltage.
•
Do not use the unit in places which are extremely hot, cold, dusty, or
humid.
•
•
Place the unit on a flat and even surface.
Do not restrict the air flow through the ventilation slots by placing the
unit on soft furnishings, by covering the unit with a piece of cloth or by
placing the unit on a carpet.
2. Press “SET/MEMORY” knob, the clock
digital will flash.
3. Press “ H...TIME SET...M/TUNING ”
knob to adjust the Hour/Minute.
ON AC VOLTAGE
•
Before using, check that the rated voltage of your unit matches your
local voltage.
• When “
noontime.
” appears, it comes to set
ON SAFETY
• When connecting and disconnecting the AC cord, grip the plug instead
of the cord itself. Pulling the cord may damage it and create hazard.
•
When you are not going to use the unit for a long period of time,
disconnect the AC power cord.
FCC INFORMATION (FOR USA ONLY)
This device complies with Part 15 of FCC Rules.
Operations are subject to the following two conditions:
(1) This device may not causeharmful interference, and
(2) This device must accept any interference received, including
interference that may cause undesirable operations.
4. Press “ MEMORY ” knob to store.
DIMMER FUNCTION
• Press “DIMMER” knob to change the LCD display brightness.
• Press “COLORS” knob to repeatly select the multi-color display
changed cyclically as below.
Should any trouble occur, disconnect the AC power cord and
refer servicing to qualified personnel.
2
4
|