JVC CD Player XL PG38BP User Manual

PORTABLE CD PLAYER  
LECTOR PORTÁTIL DE DISCOS COMPACTOS  
PORTABLE DRAAGBARE CD-SPELER  
XL-PG38BP  
OPERATING INSTRUCTIONS  
INSTRUCCIONES DE FUNCIONAMIENTO  
GEBRUIKSAANWIJZING  
LVT0978-010A [E]  
 
CAUTION:  
Do not block the ventilation opening or holes. (If the ventilation  
openings of holes are blocked by a newspaper or cloth, etc., the  
heat may not be able to get out.)  
WAARSCHUWING!  
IN DIT APPARAAT WORDT EEN LASER GE-  
BRUIKT. HET GEBRUIK VAN REGELAARS EN  
HET MAKENVAN AFSTELLINGEN OF BEDIENIN-  
GEN DIE NIET IN DEZE GEBRUIKSAANWIJZING  
STAAN BESCHREVEN,KAN LEIDENTOT BLOOT-  
STELLING AAN GEVAARLIJKE STRALING.  
MAAK HET APPARAAT NIET OPEN EN GA NIET  
ZELF REPAREREN. LAAT HET ONDERHOUD  
AAN ERKENDE VAKMENSEN OVER.  
Do not place any naked flame sources, such as lighted candles,  
on the apparatus.  
When discarding batteries, environmental problems must be con-  
sidered and local rules or laws governing the disposal of these  
batteries must be followed strictly.  
Do not expose this apparatus to rain, moisture, dripping or  
splashing and that no objects filled with liquids, such as vases,  
shall be placed on the aparatus.  
PRECAUCIÓN:  
No obstruya las rendijas o los orificios de ventilación.  
(Si las rendijas o los orificios de ventilación quedan tapados con  
un periódico, un trozo de tela, etc., no se podrá disipar el calor).  
No ponga sobre el aparato ninguna llama al descubierto, como  
velas encendidas.  
Cuando tenga que descartar las pilas, tenga en cuenta los proble-  
mas ambientales y observe estrictamente los reglamentos o las  
leyes locales sobre disposición de las pilas.  
WAARSCHUWING:  
TENEINDE HET GEVAAR VOOR BRAND OF  
ELEKTRISCHE SCHOKKEN TE VERKLEINEN,  
MAG DIT APPARAAT NIET WORDEN BLOOT-  
GESTELD AAN REGEN OF VOCHT.  
No exponga este aparato  
salpicaduras. Tampoco ponga recipientes conteniendo líquidos,  
como floreros, encima del aparato.  
a
la lluvia, humedad, goteos  
o
VOORZICHTIG:  
Zorg dat u de ventilatieopeningen en -gaten niet afsluit.  
(Als de ventilatieopeningen en -gaten worden afgesloten door  
bijvoorbeeld papier of een doek, kan er hitte in het apparaat wor-  
den opgebouwd.)  
Het kenteken bevindt zich op de onderzijde van  
het apparaat.  
Zet geen bronnen met open vuur, zoals brandende kaarsen, op  
het apparaat.  
Wees milieubewust en gooi lege batterijen niet bij het huishou-  
delijk afval. Lege batterijen dient u in te leveren met het KCA of  
bij een innamepunt voor batterijen.  
Stel dit apparaat niet bloot aan regen, vocht, drupwater of spat-  
water en plaats geen enkel voorwerp waarin zich een vloeistof  
bevindt, zoals een vaas, op het apparaat.  
 
G-2  
Bottom of the unit  
Parte inferior del aparato  
Onderzijed van het apparaat  
1. CLASS 1 LASER PRODUCT 1. PRODUCTO LASER CLASE 1  
1. KLAS 1 LASERPRODUKT  
2. DENGER: Invisible laser  
radiation when open and  
interlock failed or defeated.  
Avoid direct exposure to  
beam.  
2. PELIGRO: En el interior hay  
radiación láser invisible. Evite  
el contacto directo con el haz.  
2. GEVAARLIJK: Onzichtbare  
laserstraling wanneer open en de  
beveiliging faalt of uitgeschakeld is.  
Voorkom het direkt blootstaan aan de  
straal.  
3. PRECAUCIÓN: No abra la  
tapa superior. En el interior de  
la unidad no existen piezas  
reparables por el usuario; deje  
todo servicio técnico en manos  
de personal calificado.  
3. CAUTION: Do not open the  
top cover. There are no user  
serviceable parts inside the  
Unit; leave all servicing to  
3. VOORZICHTIG: De bovenkap niet  
openen. Binnenin het toestel bevinden  
zich geen door de gebruiker te  
repareren onderdelen: laat onderhoud  
qualified service personnel.  
over aan bekwaam vakpersoneel.  
 
G-3  
Thank you for purchasing this JVC product.  
Please read these instructions carefully before starting  
operation to be sure to obtain optimum performance and  
a longer service life from the unit.  
Location of Controls  
Table of Contents  
Location of Controls . . . . . . . . . . . . . . . . . . . . .  
Power Supply Preparations. . . . . . . . . . . . . . . .  
Accidental Operation Prevention Function  
(Hold Mode) . . . . . . . . . . . . . . . . . . . . . . . . . . .  
Basic Play . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  
Other Play Methods . . . . . . . . . . . . . . . . . . . . . .  
1
2
Right side panel of the unit  
4
5
7
A Display  
B Play / pause button (3/8)  
C Skip / search buttons (4, ¢)  
D Stop / power off button (7)  
E PROGRAM button  
F A.S.P. (Anti-shock protection EX) button  
G MODE button  
Anti-Shock Protection EX . . . . . . . . . . . . . . . . . 10  
Concerning Compact Discs . . . . . . . . . . . . . . 11  
Cautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12  
Troubleshooting Guide . . . . . . . . . . . . . . . . . . 15  
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . 16  
Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . 16  
H Lid open switch (OPEN 3)  
I DC in jack (DC IN 4.5 V  
J Headphones volume control  
)
Supplied Accessories  
Check the packing carton for these accessories.  
(VOLUME  
)
Stereo headphones .......................................... 1 pc.  
K HOLD switch  
L Hyper-bass sound switch (HBS)  
M Headphones jack (  
)
 
1
2 Connect the AC adaptor. (not included)  
* Recharging will be completed after 10 hours.  
Power Supply  
Preparations  
Using rechargeable batteries  
(not included)  
Be sure to recharge the rechargeable batteries BN-R1211  
before using them.  
For information about these, see “When purchasing re-  
chargeable batteries” on page 13.  
a DC IN jack (DC IN 4.5 V  
b AC adaptor  
c AC power outlet  
)
Recharging procedure  
1 Insert the special rechargeable batteries  
3 When recharging is complete, unplug the  
AC adaptor from the power outlet and the  
DC IN jack.  
into the unit.  
Notes:  
To operate the unit on batteries, the AC adaptor must  
be disconnected from the DC IN jack.  
• It takes approximately 10 hours to recharge the  
rechargeable batteries.  
Caution:  
Do not open the battery lid too wide. It can break if you  
forcibly open it beyond approximately 90°.  
• Rechargeable batteries have a service life of approxi-  
mately 300 charge-discharge cycles. If the operating  
time on one full charge becomes noticeably shorter than  
it used to be, the batteries have reached the end of their  
service life and should be replaced.  
 
2
Recharging takes place only when the unit is powered  
off.  
The AC adaptor and rechargeable batteries may be-  
come warm while recharging is in progress. This is  
normal and is not a malfunction.  
Using dry-cell batteries (not included)  
After disconnecting the AC adaptor, insert two R6(LR-6)  
alkaline batteries.  
The procedure for inserting and removing dry-cell  
batteries is identical to that for rechargeable batteries.  
Using the AC adaptor (not included)  
Battery indicator  
Connect the AC adaptor.  
d Battery indicator  
This indicator flashes on and off when the batteries are  
almost out of power. Power is cut off completely a short  
while later.  
a DC IN jack (DC IN 4.5 V  
b AC adaptor  
c AC power outlet  
)
Tip:  
Turning off the Anti-Shock Protection EX will save the  
battery power more or less. For details, see Anti-Shock  
Protection EXon page 10.  
Note:  
If the unit malfunctions or freezes during use,  
disconnect the power source (the AC adaptor  
and batteries) once. Then, re-connect the power  
source and continue operation.  
The unit is in the standby condition when the AC adap-  
tor is connected. The primary circuit is always liveas  
long as the AC adaptor is connected to an electrical  
outlet.  
 
3
To use the accidental operation prevention  
function  
To prevent the unit from powering up accidentally, set  
the HOLD switch to the ON position.  
To prevent the unit from unexpected operation during  
play, set the HOLD switch to the ON position after you  
starts playing the disc.  
Accidental Operation  
Prevention Function  
(Hold Mode)  
This function causes the unit to ignore short, accidental  
button presses.  
When the unit is in the hold mode according to the HOLD  
switch setting in the main unit, “  
lights up if the 6  
button is pressed.  
To release the function  
Move the HOLD switch back to the OFF position.  
Note:  
The accidental operation prevention function  
prevents the following:  
Powering on the unit accidentally (which can cause the  
If the HOLD switch is set to the ON position, you cannot  
turn on the unit.  
batteries to go dead).  
Play being cut off unexpectedly in the middle of a track.  
 
4
3
Basic Play  
4 Set the volume level to minimum position  
before playing the disc.  
5
1
2
R
L
Play now starts.  
b Track number in play  
c Elapsed playing time of each track  
Play stops automatically when all the tracks have  
been played.  
6 Ajust the volume level.  
a Label must face upward.  
Press the area near the center hole of the disc  
until it clicks into position.  
(To be continued on the next page)  
 
5
For your reference:  
This indication appears for about 30 seconds if the 3/8  
button is pressed when no disc is loaded in the unit or if  
the disc is not properly seated. Then, the unit is auto-  
matically shut off.  
“– –”  
This indication appears to let you know the status of the  
unit.  
To pause play  
Preparation period before playing the track  
Flashes for several seconds after you have press the  
3/8 button to play the disc.  
During play, press.  
(Flashes until the rotational speed of disc becomes  
constant or until the contents of disc is read.)  
Press again to resume play.  
To stop play Stop mode  
Opened lid  
Stays lit for 30 seconds when the lid is opened.  
Note:  
Never insert foreign objects into the body.  
During play, press.  
a Total number of tracks  
b Total playing time  
Auto power off function  
If the unit is left in stop mode for 30 seconds, the  
unit powers itself off automatically to prevent the  
batteries from running down.  
To turn off the unit Off mode  
In stop mode, press.  
 
6
Fast forward/reverse  
Other Play Methods  
Random play  
Skip function  
During play, press.  
Search function  
You can play all tracks in a random order. After playing  
all tracks, the unit stops.  
Keep depressed during play.  
c Reverse direction  
d Forward direction  
To skip back to the previous track, quickly press the  
4 button twice.  
During program play, the button is used to fast forward  
or back through the programmed sequence of tracks.  
During random play, the skip button cannot be used to  
skip back to tracks that were played previously in the  
random sequence.  
Follow steps 1–2.  
In step 1, play the disc.  
In step 2, press MODE until RANDOMflashes.  
Removing discs  
Release  
Press MODE until RANDOMgoes out, or press the 7  
button to stop the disc.  
For your reference:  
You can also select random play in stop mode. In stop  
mode, press MODE unitil RANDOMlights up. Then,  
press the 6 button to start random play.  
During program play (PROG.appears on the display),  
random play is not selectable.  
Turn off the unit and, after the disc has stopped rotating,  
remove the disc.  
 
7
In step 4, when you program exceeding 20 tracks, the  
program sequence number returns to 01and will  
overwrite the previous setting.  
In step 5, the tracks are played in the programmed or-  
der, and then the unit stops.  
Program play  
You can program up to 20 tracks in any desired order  
including the same tracks.  
7 To confirm the programmed tracks  
In stop mode, press PROGRAM repeatedly. The pro-  
grammed track number will successively appear together  
with the program sequence number. At this time, you  
can change the program, if required.  
If the programmed tracks are less than 20, track number  
00appears for the youngest programmable sequence  
number, enabling further programming.  
7 To delete the entire programmed sequence  
Turn off the unit, or set the track number to 00 for the  
first program sequencer number, 01.  
Repeat steps 2 and 3 to program all the desired  
tracks.  
Follow steps 1–5.  
In step 1, during playback or in stop mode, press PRO-  
GRAM.  
a Track number to be programmed  
00: Not programmed yet.  
b Program sequence number  
In step 2, select the desired track.  
c e.g. Track number 3  
In step 3, register in sequence.  
The track is registered, and 00and the next program  
sequence number appear.  
 
8
Repeat function  
Intro play  
You can repeatedly play one track or all tracks.  
You can successively play the first 10 seconds of every  
track from the first track.  
Intro play stops after playing the last track.  
In step 1, during playback or in stop mode, press MODE  
until the repeat indicator lights up.  
In step 2, press the 6 button, if in stop mode.  
In step 1, during playback, press MODE until INTRO”  
flashes.  
Cancelling  
In step 2, the INTROplay will start from the first track.  
Press MODE until the repeat indicator goes out and the  
Cancelling  
unit returns to normal play mode.  
Press MODE until INTROgoes out and the unit re-  
For your reference:  
turns to normal play mode.  
Repeat function is also effective for program play.  
To normally play the track being played  
Press the 6 button.  
For your reference:  
You can also enter intro play in stop mode.  
You can also use intro play for program play.  
 
9
Hyper-Bass Sound effect  
Anti-Shock Protection EX  
You can enjoy powerful bass sound.  
This function has been developed to achieve excellent  
performance against sound interruption caused by vi-  
brations. You will be able to enjoy listening to music dur-  
ing jogging (not vigorous jogging). This function is  
achieved by utilizing the high-performance servo circuit  
and audio data that has been stored in the memory  
ahead of time (up to 45 seconds worth).  
To get the hyper-bass sound effect  
Set HBS switch to 1.  
Set HBS switch to 2to set more effect.  
ANTI SHOCK  
indicator  
To cancel the effect  
Set HBS switch to OFF.  
When the disc is played, as the audio data gradually  
stored in the memory, the ANTI SHOCKindicator  
changes.  
[Fully stored]  
 
10  
To cancel the Anti-Shock Protection EX  
Concerning Compact  
Discs  
Press the A.S.P. button in stop mode or during playback.  
The ANTI SHOCKindicator goes out on the display.  
To activate the Anti-Shock Protection EX again  
Press the A.S.P. button again.  
Only compact discs bearing this mark can be used  
with this unit.  
However, continued use of irregular shape CDs (heart-  
shape, octagonal, etc.) can damage the unit.  
CD-R and CD-RW discs recorded with the audio CD  
format can be played back, though some may not be  
played back because of the disc characteristics or  
recording condition.  
Notes:  
During Anti-Shock Protection EX operation, the disc  
rotates at a higher rate than usual in order to collect  
extra audio data. This may cause the batteries to run  
out faster and could result in a slight increase in disc  
rotation noise.  
TheAnti-Shock Protection EX function can be switched  
ON and OFF during playback. However, this may cause  
a slight interruption in the sound because the discs  
rotational speed changes.  
How to remove a disc from its case  
How to store the disc in its case  
Label side up  
(To be continued on the next page)  
 
11  
fingerprints or scratches. Do not use record cleaners,  
solvents, etc.  
How to hold a disc  
Do not attach labels or stickers to CDs.  
Do not use CDs with exposed adhesive from tape or  
left over peeled off stickers.  
Do not use scratch-proof protectors or covers other than  
those specified for use with this unit.  
If the disk surface is dirty  
Cautions  
Rechargeable batteries  
a Play surface (shiny surface)  
Wipe it with a damp cloth and then wipe dry.  
Wipe from the center toward the outer edge.  
If moisture has formed on a disc  
Only the BN-R1211 battery can be recharged.  
If the power delivered by the batteries lasts for a very  
short time after recharging, it means that the  
batteriesservice life is over. Do not use them any  
more.  
When moisture has formed because the disc was  
brought suddenly into a warm room from a cold  
environment, wipe off the moisture using a soft dry  
cloth.  
When storing discs  
Avoid locations which are  
Recharging already charged batteries will shorten  
their service life.  
Exposed to direct sunlight.  
When recharging batteries for the first time or when  
they have not been used for a long period of time,  
the play time may be shorter than usual. In a case  
like this, repeatedly recharge and discharge the  
batteries. This will restore them to their regular state.  
Do not allow any metal objects to touch the terminals  
of rechargeable batteries since this may cause short-  
circuiting which is dangerous.  
Susceptible to high levels of humidity or dust.  
Directly exposed to heat from a heating appliance.  
On top of a car dashboard or near the rear window.  
Handling precautions  
On the label side (the side with writing)  
Do not write anything using a pencil, ball-point pen,  
etc. Do not use adhesive paper or labels.  
On the disc (shiny) side  
Handle this side carefully to keep it free from  
 
12  
Do not peel off the plastic covering on the recharge-  
able batteries. Short-circuiting may occur which is  
dangerous.  
When purchasing rechargeable  
batteries  
As a safety precaution, the portable CD players made  
by JVC have a construction designed to make it  
impossible to recharge ordinary batteries.  
To use rechargeable batteries, be absolutely sure to  
purchase the rechargeable Ni-Cd batteries designed  
especially for this unit.  
Special rechargeable Ni-Cd batteries:  
BN-R1211 (set of 2)  
For details, check with your dealer.  
Dry cell batteries/rechargeable  
batteries  
To prevent damage to the batteries and electrolyte  
leakage, heed the following points.  
Align the , and . polarities properly when inserting  
the batteries.  
Do not mix different types or makers of batteries or  
old and new batteries.  
Remove the batteries if you do not plan to use the  
unit for a long period of time.  
Do not throw batteries into a fire, and do not short-  
circuit, disassemble or subject them to excessive  
heat.  
Special rechargeable  
batteries  
Ordinary dry cell  
batteries/  
rechargeable  
batteries  
Do not attempt to recharge dry cell batteries.  
Carrying dry cell batteries/  
rechargeable batteries around  
Notice about the rechargeable battery  
The battery is designated recyclable.  
Please follow your local recycling regulations.  
When putting dry cell or rechargeable batteries in a  
pocket or bag, ensure that no other metal objects such  
as a necklace are placed together with them. Contact  
with metal may cause short-circuiting which, in turn,  
may cause a fire.  
 
13  
Do not leave the unit exposed to direct sunlight for long  
periods of time  
AC adaptor  
This may deform or discolor the cabinet and may also  
cause malfunctioning.  
Handle the AC adaptor carefully. Improper handling  
is dangerous.  
Do not touch it with wet hands.  
Do not place heavy objects on top of it.  
Do not forcibly bend it.  
Disconnect the AC adaptor from the power outlet if  
the unit is not going to be used for a long time.  
Listening precautions  
Do not play your headphones at a high volume.  
Hearing experts advise against continuous extended  
play.  
If you experience a ringing in your ears, reduce  
volume or discontinue use.  
When purchasing AC adaptor  
You should use extreme caution or temporarily  
discontinue use in potentially hazardous situations.  
Even if your headphones is an open-air type  
designed to let you hear outside sounds, dont turn  
up the volume so high that you cant hear whats  
around you.  
To use AC adaptor, be absolutely sure to purchase the  
AC adaptor designed especially for this unit.  
AC adaptor : AA-R4515 (for the U.K.)  
: AA-R4514 (for other area)  
For details, check with your dealer.  
Unit  
No altering or remodeling  
This can cause malfunctioning.  
No dropping or strong impacts  
This may damage the unit.  
Locations to be avoided  
Avoid using the unit in the following locations since  
they can cause malfunctioning.  
1. Bathrooms and other moisture-prone places.  
2. Warehouses and other dusty places.  
3. Very hot places near heating appliances, etc.  
 
14  
Troubleshooting Guide  
Before requesting service for this unit, check the chart below for a possible cause of the problem you are experienc-  
ing. Some simple checks or a minor adjustment on your part may eliminate the problem and restore proper operation.  
If you are in doubt about some of the check points, or if the remedies indicated in the chart do not solve the problem,  
refer to the directory of Authorized Service Centers (enclosed with this unit) to locate a convenient service center, or  
consult your dealer for instructions.  
Problem  
Check this  
Does not turn on.  
Are the batteries charged?  
Is the AC adaptor securely connected?  
Is the HOLD switch set to HOLD position?  
Is the disc properly secured in place?  
Is the unit in HOLD status?  
Cannot close cover.  
Cannot play discs.  
Is the disc properly secured in place?  
Is there moisture condensation on the lens?  
(Wait for about an hour and then try again.)  
Are the headphone plug and the wire remote control plug inserted  
all the way?  
Cannot hear music—too noisy.  
Is the plug dirty? (Wipe away dirt on the plug.)  
Are you using the unit body too near a TV or tuner? (If the TV or  
tuner is connected to a simple indoor antenna, connect it to an out-  
door antenna.)  
TV picture is distorted.  
Radio reception is noisy.  
Is the disc damaged?  
Is the disc playable on this player?  
“diSC” or “Er” is displayed when a disc is  
in the player.  
Has the disc been inserted upside down?  
 
15  
Specifications  
Maintenance  
Maintaining the unit  
Type  
: Compact disc player  
Signal detection system : Non-contact optical pickup  
(semiconductor laser)  
Wipe the unit with a soft cloth. Remove stubborn dirt  
using a cloth which has been dipped in water or soapy  
water and wrung out, and then wipe dry.  
• If you intend to use a chemically treated cleaning cloth,  
read its directions first.  
Pickup system  
: 3 beam laser  
Number of channels : 2 channels (stereo)  
Frequency response : 20 Hz to 20 000 Hz  
Wow & flutter  
Output  
: Unmeasurable  
: Headphone (3.5 mm dia.  
stereo × 1)  
• Do not use alcohol or paint thinners.  
Maintaining the lens  
lens  
9 mW/ch at 10 % THD/16 Ω  
matching impedance (16 to  
1 k)  
Air blower for  
camera lens  
Duration of battery : Approx. 3 hours when using  
(with Anti-Shock  
Protection EX OFF)  
two rechargeable batteries  
(BN-R1211) charged for 10  
hours.  
Approx. 20 hours when using  
two alkaline batteries (LR6)  
Power requirements : DC 3 V (“R6” size battery × 2)  
DC 2.4 V (rechargeable battery  
× 2)  
lens  
DC IN 4.5 V  
Dimensions (W×H×D) : 134 mm × 30 mm × 144 mm  
(Excluding buttons and controls)  
Mass  
: 237 g  
(without batteries)  
* Design and specifications are subject to change with-  
out notice.  
 
16  
VICTOR COMPANY OF JAPAN, LIMITED  
EN,SP,NL  
©2003 VICTOR COMPANY OF JAPAN, LIMITED  
0303SKMCREORI  
 

Indesit Washer Dryer WDE 12 User Manual
Ingersoll Rand Marine Safety Devices 1 1 2002 User Manual
Ingersoll Rand Sprinkler 99828618 User Manual
Integra Stereo Receiver DTR 83 User Manual
IntraServer Technology Network Card ITIpci 5100G GF User Manual
ION Camcorder Accessories 2 SD User Manual
Jasco Indoor Furnishings ZWAVEKIT User Manual
Jensen Car Stereo System BT1613 User Manual
JL Audio Car Speaker SB GM SLVCTR2 10W3v3 User Manual
KitchenAid Freezer KSRB22Q User Manual