Jensen Car Stereo System CD6112 User Manual

CD6112  
 
CD6112  
TABLE OF CONTENTS  
Table of Contents ......................................................................................i  
Introduction ..............................................................................................1  
Installation ................................................................................................2  
Wiring Diagram ........................................................................................4  
Front Panel Release ................................................................................5  
Operation .................................................................................................6  
Tuner Operation .......................................................................................8  
CD Player Operation ................................................................................9  
Remote Control ......................................................................................10  
Care and Maintenance ...........................................................................11  
Troubleshooting .....................................................................................12  
Specifications .........................................................................................13  
i
 
CD6112  
ii  
 
CD6112  
INTRODUCTION  
Congratulations on your purchase of the Jensen CD6112 Mobile Receiver.  
It’s a good idea to read all of the instructions before beginning the  
installation. We recommend having your Jensen CD6112 installed by a  
reputable installation shop.  
Features  
CD  
CD R / RW Compatible  
Last Position Memory  
Audible Forward / Reverse Track Search  
Random, Repeat and Intro  
Play, Pause, Stop, Next Track and Previous Track  
AM-FM  
USA / Europe Frequency Spacing  
30 Station Presets (18 FM / 12 AM)  
Stereo / Mono  
Local / Distance  
Auto Store / Preview Scan  
Chassis  
Detachable Faceplate  
1.0 DIN (Import / ISO-DIN Mountable)  
8 Character / Segment Type LCD Display  
Chassis Mounted Rear Auxiliary Inputs  
General  
Infrared Remote Control  
Media Adapter Cable (2 meter male 3.5mm to male RCA cable)  
Programmable Volume Control  
Three Preset EQ Curves  
Loudness  
Rotary Encoder Audio Control  
Beep Tone Confirmation (On-OFF Option)  
Rear Line Output  
200-Ohm Preamp Line Outputs  
2VRMS Line Outputs  
1
 
CD6112  
INSTALLATION  
This unit is designed for installation in cars, trucks and vans with an existing  
radio opening. In many cases, a special installation kit will be required to  
mount the radio to the dashboard. These kits are available at electronics  
supply stores and car stereo specialty shops. Always check the kit  
application before purchasing to make sure the kit works with your vehicle.  
If you have trouble locating a kit or need installation assistance, contact  
Technical Support at 1-800-323-4815 from 9:00am to 6:00pm EST Monday  
through Friday.  
Using the Mounting Sleeve  
1. Slide the mounting sleeve off the chassis. If it is locked into position,  
use the removal tools (supplied) to disengage it.  
2. Check the dashboard opening size by sliding the mounting sleeve into  
it.  
Tools and Supplies  
The following tools and supplies are needed to install the radio:  
Torx type, flathead and Philips screwdrivers  
Wire cutters and strippers  
Tools to remove existing radio (screwdriver, socket wrench set or other  
tools)  
Electrical tape  
Crimping tool  
Volt meter/test light  
Crimp connections  
18 gauge wire for power connections  
16-18 gauge speaker wire  
If the opening is too small, carefully cut or file as necessary until the  
sleeve easily slides into the opening. Do not force the sleeve into the  
opening or cause it to bend or bow. Check for sufficient space behind  
the dashboard for the radio chassis.  
3. Locate the series of bend tabs along the top, bottom, and sides of the  
mounting sleeve. With the sleeve fully inserted into the dashboard  
opening, bend as many of the tabs outward as necessary to firmly  
secure the sleeve to the dashboard.  
Preparation  
CAUTION: For proper operation of the CD player, the chassis must be  
mounted within 20° of horizontal. Make sure the unit is mounted within  
this limitation.  
1. Disconnect Battery  
Before you begin, always disconnect the battery negative terminal.  
2. Remove Transport Screws  
4. Place the radio in front of the dashboard opening so the wiring can be  
brought through the mounting sleeve. Follow the wiring diagram  
carefully and make certain all connections are secure and insulated  
with wire nuts or electrical tape. See “Wiring Diagram” on page 4.After  
completing the wiring connections, turn the unit on to confirm operation  
(vehicle ignition must be on). If the unit does not operate, re-check all  
wiring until the problem is corrected.  
TRANSPORT  
SCREWS  
HALF  
SLEEVE  
CD61  
12  
5. Make sure the radio is right-side up, then  
MOS  
FET  
POW  
ERE  
D
SPRING CLIP  
/
carefully slide the radio into the mounting  
LO  
/D  
X
LO  
UD  
PS/  
AS  
sleeve until it is fully seated and the spring clips  
lock it into place.  
DN  
UP  
6. Secure the rear of the unit to the car body  
using the mounting bolt and rubber cushion.  
3. Remove Radio from Sleeve  
Lift latches on both sides of sleeve to remove half-sleeve from radio.  
2
 
CD6112  
7. Test the radio using the Operating Instructions that follow.  
2. Carefully unsnap the plastic frame from the front of the new radio  
chassis. Remove and discard the frame.  
3. Remove the factory mounting brackets and hardware from the existing  
radio and attach them to the new radio. Do not exceed M5 x 9 MM  
maximum screw size. Longer screws may damage components inside  
the chassis.  
4. Wire the new radio to the vehicle as outlined in the Universal Installation  
instructions.  
BEND TABS  
MOUNTING  
SLEEVE  
RUBBER  
CUSHION  
5. Mount the new radio assembly to the dashboard or center console  
using the reverse procedure of step 1.  
MOUNTING BOLT  
Fuses  
RADIO  
When replacing a fuse, make sure the new fuse is the correct type and  
amperage. Using an incorrect fuse could damage the radio.  
TRIM RING  
Reconnect Battery  
When wiring is complete, reconnect the battery negative terminal.  
Removing the Radio  
Kit Installation  
To remove the radio after installation, remove the trim ring by lifting in the  
center and pulling it off from either side. Insert the removal keys straight  
back until they lock, then pull the radio out. If removal keys are inserted at  
an angle, they will not lock properly and will not release the unit.  
If your vehicle requires the use of an installation kit to mount this radio,  
follow the instructions included with the installation kit to attach the radio to  
the mounting plate supplied with the kit.  
1. Wire and test the radio as outlined in the Universal Installation instruc-  
tions.  
2. Install the radio/mounting plate assembly to the sub-dashboard  
according to the instructions in the installation kit.  
3. Attach the support strap to the radio and dashboard as described in the  
Universal Installation instructions.  
4. Replace the dashboard trim panel.  
ISO Installation  
This unit has threaded holes in the chassis  
side panels which may be used with the  
original factory mounting brackets of some  
vehicles to mount the radio to the  
dashboard. Please consult with your local  
car stereo shop for assistance on this type  
of installation.  
Technical Assistance  
If you require assistance, contact Technical Support at 1-800-323-4815  
from 9:00am to 6:00pm EST Monday through Friday.  
1. Remove the existing factory radio  
from the dashboard or center console  
mounting. Save all hardware and  
brackets as they will be used to mount the new radio.  
3
 
CD6112  
WIRING DIAGRAM  
Antenna  
Connect the antenna plug  
from the existing antenna  
cable (some vehicles  
Fuse (15 amp fast blow ATO)  
require an adaptor).  
Aux-in  
R (Red)  
R (Red)  
L (White)  
Rear Line out  
Gray  
L (White)  
Ground  
Power Antenna  
Connect to power antenna or amplifier.  
If not used, tape bare end of wire.  
Black  
Connect to ground terminal  
or clean, unpainted part  
of chassis.  
Blue  
Memory/Battery  
Connect to battery or 12 volt  
power source that is always live.  
The radio will not work if this  
wire is not connected.  
Yellow  
Accessory/Ignition  
Connect to existing radio wire  
or radio fuse.  
Red  
FRONT SP  
Gray  
REAR SP  
Green/Black  
White/Black  
Stripe  
White Gray/Black  
Stripe  
Green Purple/Black  
Stripe  
Purple  
Stripe  
Left Speaker  
(Front)  
Right Speaker  
(Front)  
Left Speaker  
(Rear)  
Right Speaker  
(Rear)  
NOTE: Only connect speakers rated in the load impedance of 4 ohms.  
Speakers with a load impedance less than 4 ohms could damage the  
unit.  
NOTE: The amplifier in this radio is only designed for use with four  
speakers. Never combine (bridge) outputs for use with two speakers.  
Never ground negative speaker leads to chassis ground. Failure to  
wire exactly as shown may cause electrical damage to the radio.  
4
 
CD6112  
FRONT PANEL RELEASE  
The front panel release button (4) releases the mechanism that holds the  
front panel to the chassis.  
Detaching the Front Panel  
To detach the front panel, first press the front panel release button to  
release the left side of the panel. Next, grasp the released side and pull it off  
the chassis. After removing the front panel, store it in the supplied carrying  
case to protect it from dirt and damage.  
Re-attaching the Front Panel  
To re-attach the front panel, make sure the electrical terminals on the back  
of the panel are free of dust and dirt, as debris could cause intermittent  
operation or other malfunctions. Position the right side of the panel in place  
so that it is correctly engaged, then lightly press the left side of the panel  
until the mechanism locks it into place.  
5
 
CD6112  
OPERATION  
Power  
Press the power button (2) to turn the unit on. Press and hold the power  
button again to turn the unit off.  
NOTE: LCD panels may take longer to respond when subjected to cold  
temperatures for an extended period of time. In addition, the visibility  
of the numbers on the LCD may decrease slightly. The LCD display  
will return to normal when the temperature increases to a normal  
range.  
CD6112  
160  
Watts  
DX/ST  
PS/AS  
LOUD  
/
Source  
Press the SRC button (6) to select a different mode of operation, as  
indicated on the display panel. Available modes include tuner (FM1, FM2,  
FM3, AM1, AM2), CD, and auxiliary (AUX). CD mode appears in the menu  
only if a CD is present in the CD player.  
Bass  
Audio Mute  
To adjust the bass level from “-6” to “+6”, press the MENU button (5) until  
“BAS” appears in the display. Turn the rotary encoder clockwise to increase  
or counter-clockwise to decrease the bass. “0” represents a flat response.  
Press the mute button (2) to silence the audio volume. “Mute” appears on  
the display. Press mute again to restore volume to the previous setting.  
Volume / Audio Control  
Treble  
To increase the volume, turn the rotary encoder (5) clockwise. To decrease  
the volume, turn the rotary encoder counter-clockwise. When volume is  
adjusted, the volume level will be shown on the display panel as a number  
ranging from “0” (lowest) to “46” (highest).  
To adjust the treble level from “-6” to “+6”, press the MENU button until  
“TRE” appears in the display. Turn the rotary encoder clockwise to increase  
or counter-clockwise to decrease the treble. “0” represents a flat response.  
Balance  
Press the MENU button (5) repeatedly to step through the following audio  
functions: volume (VOL), bass (BAS), treble (TRE), balance (BAL), fader  
(FAD) and back to volume. The unit automatically exits audio control mode  
after five seconds of inactivity.  
To adjust the balance from “12L” (full left) to ”12R” (full right), press the  
MENU button until “BAL” appears in the display. Turn the rotary encoder to  
adjust the balance between the left and right speakers. “L = R” represents a  
center balance.  
Fader  
VOL  
VOL  
To adjust the fader from “12F” (full front) to “12R” (full rear), press the  
MENU button until “FAD” appears in the display. Turn the rotary encoder to  
adjust the fader between the front and rear speakers. “F = R” represents a  
center fader level.  
F
A
D
E
R
T
AS  
B
L
A
B
P
U
S
E
L
E
C
T
FAD  
BAS  
D
F
A
D
F
A
E
R
E
R
T
T
AS  
AS  
B
B
L
A
L
A
B
B
P
P
U
U
S
S
E
E
L
L
E
E
C
C
T
T
F
A
D
E
R
T
AS  
B
L
A
B
BAL  
TRE  
P
U
S
E
L
E
C
T
6
 
CD6112  
Equalizer Selector  
Clock Set  
The equalizer function applies preset sound effects to the unit’s audio  
output signal. Press EQ (16) to step through the following equalizer options:  
“ROCK”, “HIP-HOP”, “DANCE”, and “EQ OFF”.  
1. Press the DISP button (7) to display the clock.  
2. Press and hold the DISP button until the clock blinks.  
3. Turn the rotary encoder (5) clockwise the set the hour and counter-  
clockwise to set the minutes.  
When the equalizer function is activated, the most recently selected bass/  
treble levels cannot be adjusted. When the equalizer function is not active,  
the unit will return to the most recently selected bass and treble levels.  
Reset Button  
The RESET button is located on the front of the chassis and can only be  
accessed with the front panel removed. The reset circuitry protects the  
microprocessor circuitry. Since resetting the unit will erase the time and  
preset memories, it should only be activated upon initial installation after all  
wiring is complete or if there is a malfunction of any of the switches on the  
unit. In these circumstances, pressing the RESET button will clear the  
system and return the unit to normal operation.  
Loudness Control (LOUD)  
When listening to music at low volume levels, this feature will boost the  
bass and treble ranges to compensate for the characteristics of human  
hearing. Press the LOUD button (14) to turn the LOUD function on/off.  
Menu Operation  
Press and hold the MENU button (5) for more than two seconds to access  
the menu. Press the MENU button to move through the following menu  
options: VOL LAST/VOL ADJ, BEEP ON/OFF, AREA SET MODE, 12/24  
HOUR SET MODE.  
Programmable Turn-on Volume Level  
RESET  
RESET BUTTON  
Press the MENU button (5) to select “VOL LAST” or “VOL ADJ”.  
VOL LAST: When the unit is turned on, the volume will resume at the  
level selected when last turned off.  
VOL ADJ: After selecting “VOL ADJ”, turn the rotary encoder (5) to  
select the desired level. When this option is selected, the unit will revert  
to the adjusted volume each time the unit is turned on.  
Beep Tone  
The beep tone feature allows the selection of an audible beep tone to be  
heard each time a button is pressed on the face of the radio. “BEEP ON” is  
the default display.  
To turn the audible beep off:  
1. Press the MENU button to select “BEEP ON”.  
2. Turn the rotary encoder to select the “BEEP OFF” option.  
Frequency Spacing  
This option allows you to select the appropriate frequency spacing for your  
area. “AREA U.S.A.” is the default setting. Turn the rotary encoder to select  
“EUROPE”.  
12/24 Hour Time Format  
This option allows selection of a 12 hour or 24 hour clock format. “12  
HOUR” is the default setting. Turn the rotary encoder to change to the 24  
hour clock format.  
7
 
CD6112  
TUNER OPERATION  
The CD6112 allows you to receive channels in U.S.A. or EUROPE mode.  
See “Frequency Spacing” on page 7 to learn how to change the tuner  
options.  
Auto Seek Tuning  
Press the UP TUNING >>| or DOWN TUNING |<< buttons (17) for less than  
three seconds to move to the next/previous station automatically.  
Preset Stations  
Up to six stations on each band can be stored as presets and can then be  
instantly recalled by pressing the associated preset button (12). To store a  
station, turn the radio on and select the desired band and station. Press and  
hold the desired preset button (numbered one through six on the face of the  
radio) for more than two seconds. When stored, the preset number will  
appear in the display. The station is now stored and can be re-called at any  
time by pressing the corresponding preset button. Repeat for the remaining  
five presets on the current band and for all presets on the other four bands.  
CD6112  
160  
Watts  
DX/ST  
PS/AS  
LOUD  
/
Preview Scan / Automatically Store (PS/AS)  
Preview Scan  
Press PS/AS (13) to scan all strong stations in the current band. The unit  
will stop at each station for five seconds before continuing to the next  
station. Press PS/AS again to stop scanning and listen to the current  
station.  
Select a Band  
Press BAND (3) to change between three FM bands and two AM bands.  
Each band stores up to six preset stations.  
Automatically Store  
Select six strong stations and store them in the current band using the  
Automatic Store feature. To enable this feature, press and hold PS/AS (13)  
for more than two seconds. The radio will automatically scan the band in  
use and enter strong stations into the preset memory positions for that  
band. After entering the stations into memory, the unit will automatically  
stop at each station for five seconds so each can be heard. When using the  
Automatically Store feature, the new stations replace any stations already  
stored in preset memory for the selected band.  
Mono/Stereo Selection  
Press and hold the DX/ST button (15) to switch between monaural and  
stereo reception. Choose mono when a strong stereo signal cannot be  
achieved (stereo mode is indicated by the  
temporarily appears on the screen when selected.  
icon). “MONO” or “STEREO”  
Local/Distant Reception  
When the Local function is on, only radio stations with a strong radio signal  
are played. Activate the Local (LOC) function by pressing the DX/ST button  
(15). Press DX/ST again to activate the Distant (DX) mode (indicated by the  
triangle with rings above it).  
Tuning  
Manual Tuning  
Press the UP TUNING >>| or DOWN TUNING |<< buttons (17) for more  
than three seconds to enter manual tuning mode, then press the Up Tuning  
or Down Tuning buttons to move the radio frequency number up or down  
one step.  
8
 
CD6112  
CD PLAYER OPERATION  
Insert and Eject CD  
Insert a CD, label side up. To stop CD play and eject the CD, press the eject  
button (1).  
NOTE: The unit is designed for play of standard 5” (12 cm.) compact  
discs only. Do not attempt to use 3” (8 cm.) CD singles in this unit,  
either with or without an adaptor, as damage to the player and/or the  
disc may occur. Such damage will not be covered by the warranty on  
this product.  
CD6112  
160  
Watts  
DX/ST  
PS/AS  
LOUD  
/
Pause  
Press the pause >/|| button (8) to suspend disc play. Press the pause button  
again to resume disc play.  
Track Select  
Press the UP TUNING >>| or DOWN TUNING |<< buttons (17) for less than  
one second to advance to the next track on the CD. The selected track  
number will appear on the display. Press and hold the UP TUNING >>| or  
DOWN TUNING |<< buttons (17) to fast forward or fast reverse through the  
disc. CD play starts when the button is released.  
CD Player Error Codes  
If a problem should develop while operating the CD player, an error code  
(ER-1, ER-2, etc.) may appear on the display panel. This can indicate a  
number of problems with the unit, including a mechanical error or an error in  
the microprocessor control of the player. If an error code should appear, try  
ejecting and reloading the disc into the player. While the disc is out of the  
unit, make sure it is clean and undamaged, and then load it correctly. If this  
does not solve the problem, pressing the RESET button may help, but will  
erase the time and preset memory. If the suggested measures do not solve  
the problem, contact an approved warranty station near you for further  
assistance.  
Intro Scan (INT)  
During disc play, press INT (9) to play the first 10 seconds of each track on  
the disc. When the desired track is reached, press INT again to end the  
scan and play the selected track.  
Repeat (RPT)  
Press RPT (10) during disc play to continuously repeat the track. Press  
RPT again to stop repeating.  
NOTE: If an MP3 or other unsupported format disc is inserted in the  
unit, 'Disc Error' appears on the LCD. This unit only supports the CD-  
DA format.  
Random (RDM)  
Press RDM (11) during disc play to play all tracks on a CD in random,  
shuffled order. Press RDM again to stop random play.  
9
 
CD6112  
REMOTE CONTROL  
The remote control will allow you to control the basic functions of the  
CD6112.  
Replacing the Battery  
When the range of operation of the card remote control becomes short or  
stops functioning, replace the battery with a new lithium battery. Be sure to  
observe the proper polarity, as indicated below.  
(CR 2025)  
MUTE  
SRC  
VOL  
SEL  
PS/AS  
MENU  
LOUD  
DX/ST  
EQ  
BAND  
2
1
4
2
3
1
/
INT  
RPT  
RDM  
DISP  
5
6
Operating Range  
The remote control sensor (19) is located to the right of the SRC button.  
The remote control can operate within a distance of 3~5m.  
REMOTE SENSOR  
10  
 
CD6112  
CARE AND MAINTENANCE  
CD Player  
of the disc. Playing a defective or dusty CD can cause dropouts in  
sound.  
The following guidelines will help you extend the life of your CD player:  
2. Never use chemicals such as record sprays or household cleaners to  
clean CDs, as they can irreparably damage the disc’s surface.  
3. This unit cannot play 3-inch ( 8cm ) CDs. NEVER insert a 3-inch CD  
contained in the adapter or an irregularly shaped CD. The unit may not  
be able to eject it, resulting in a malfunction.  
4. Discs should be kept in their storage cases when not in use.  
5. Do not expose discs to direct sunlight, high temperatures or high  
humidity for long periods.  
1. When cleaning the vehicle interior, do not get water or cleaning fluids on  
the unit.  
2. DO NOT attempt to disassemble the unit. Laser beams from the optical  
pickup are dangerous to the eyes.  
3. The CD player may not operate properly in extreme hot/cold or under  
damp conditions. In case of such conditions, wait until the vehicle  
interior reaches a normal temperature or any condensation on the disc  
player lens has evaporated before using the player.  
4. Never insert anything other than round 5” CDs into the player.  
Attempting to insert CDs of other sizes (even with an adaptor) will  
cause damage not covered by the warranty.  
6. Do not stick paper, tape or CD labels on disc surfaces, as internal  
damage may occur.  
5. Always remove the CD when the player is not is use.  
6. The unit is designed with a vibration dampening CD mechanism to  
minimize interruption of disc play due to normal vibration in a moving  
vehicle. However, occasional sound skips may occur when driving on  
very rough roads. This will not scratch or damage the disc, and normal  
play will resume when the rough conditions cease.  
Compact Discs  
CD-R and CD-RW Capability  
Depending on media type and method of "recording/burning", some CD-R/  
RWs may be incompatible with this unit. After "recording/burning", the  
session must be closed. Please refer to your software's recommended  
procedures for closing a disc/session. Review your recording software to  
familiarize yourself with the correct "recording/burning" procedures. We  
TM  
TM  
recommend using the latest versions of ROXIO or NERO burning  
software.  
In addition, this unit will only recognize the CDDA (Compact Disc Digital  
Audio) format "recorded / burned" onto a CD-R/RW. This unit does not  
support .MP3, .WMA, .WAV, .OGG or other formats.  
CD Care and Handling  
Dirt, dust, scratches and warpage can cause skips in the playback and  
deterioration of sound quality. Please follow these guidelines to take care of  
your compact discs.  
1. Carefully wipe fingerprints, dust and dirt from the disc’s playing surface  
with a soft cloth. Wipe in a straight motion from the inside to the outside  
11  
 
CD6112  
TROUBLESHOOTING  
Problem  
Cause  
Corrective Action  
Does not operate No power to yellow  
Check connection with test  
(display does not wire; no power to red light; check vehicle fuse with  
light)  
wire  
test light  
Inline fuse blown  
Inline fuse blown  
Replace fuse  
Check/replace fuse  
No power to unit  
Not all speakers  
operate  
Incorrect splices or  
connections  
Check all splices and  
connections  
Speaker wires shorting Check splices; insulate all  
to chassis ground or to bare wires  
each other  
Blows fuses  
Power wire shorting to Make sure wire is not pinched  
ground  
Speaker wires shorting Make sure wire is not pinched  
to ground  
Incorrect fuse; fuse too Install fuse of correct rating  
small  
12  
 
CD6112  
SPECIFICATIONS  
CEA Power Ratings  
Power Output . . . . . . . . . . . . . . . 13 Watts RMS x 4 channels into 4-Ohms @ < 1% THD+N  
Signal to Noise Ratio  
70dBA below reference (Reference: 1 Watt, 4-Ohms)  
Frequency Response . . . . . . . . . .20 Hz - 20 kHz, -3dB (Aux Input used as reference input)  
Reference Supply Voltage. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14.4VDC  
CD Player  
Compatible Disc Media . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . CD-R / RW  
Compatible Media Formats . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . CD-DA  
Signal to Noise Ratio @ 1 kHz . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . >90dB  
Frequency Response . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20Hz to 20 kHz, -3dB  
Channel Separation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . > 60dB @ 1 kHz  
D/A Converter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1bit/channel  
FM Tuner  
Tuning Range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 87.5MHz - 107.9MHz  
Mono Sensitivity (-30dB). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11dBf  
Quieting Sensitivity (-50dB). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15dBf  
Signal to Noise Ratio @ 1 kHz . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58dB  
Stereo Separation @ 1 kHz. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . >30dB  
Frequency Response . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30Hz - 12kHz, -3dB  
AM Tuner  
Tuning Range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 530 kHz - 1710 kHz  
Sensitivity (-20dB). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15uV  
Signal to Noise Ratio @ 1 kHz . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50dB  
Frequency Response . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50Hz - 2kHz, -3dB  
Auxiliary Input  
Input Sensitivity. . . . . . . . . . . . . . . . . . . . . . . . . . . .400mV RMS for 1 watt RMS into 4-ohms  
Frequency Response . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20Hz to 20kHz, -3dB  
Input Impedance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10k ohms  
General  
Power Supply . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 to 16VDC, negative ground  
Power Antenna (Blue). . . . . . . . . . . . . . . . . . . . . . . . .500mA max, current limited protection  
Operating Temperature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -20C ~ 65C  
Fuse . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15-amp, ATO type  
* Specifications subject to change without notice.  
13  
 
CD6112  
14  
 
Limited Warranty  
DO NOT RETURN THIS PRODUCT TO THE STORE  
CD or Multimedia Radios/Headunits  
Audiovox Electronics Corporation (“the Company”) is committed to  
quality and customer service, and are pleased to offer you this  
Warranty. Please read it thoroughly and contact the Company at 1-800-  
323-4815 with any questions.  
Limitations  
THE EXTENT OF THE COMPANY'S LIABILITY UNDER THIS WARRANTY  
IS LIMITED TO THE REPAIR OR REPLACEMENT PROVIDED ABOVE AND,  
IN NO EVENT, SHALL THE COMPANY'S LIABILITY EXCEED THE  
PURCHASE PRICE PAID BY PURCHASER FOR THE PRODUCT.  
Who is covered?  
The Company extends this warranty to the original retail purchaser of products  
purchased through an authorized Audiovox retailer in the U.S.A., Puerto Rico or  
Canada. This warranty is not transferable or assignable. Proof of purchase is  
required in the form of an original sales receipt.  
This Warranty is in lieu of all other express warranties or liabilities. ANY IMPLIED  
WARRANTIES,  
INCLUDING  
ANY  
IMPLIED  
WARRANTY  
OF  
MERCHANTABILITY, SHALL BE LIMITED TO THE DURATION OF THIS  
WRITTEN WARRANTY. ANY ACTION FOR BREACH OF ANY WARRANTY  
HEREUNDER  
MERCHANTABILITY MUST BE BROUGHT WITHIN  
INCLUDING  
ANY  
IMPLIED  
WARRANTY  
OF  
What is covered?  
A
PERIOD OF 24  
The Company warrants that should this product or any part thereof, under normal  
use, be proven defective in material or workmanship within 12 months from the  
date of original purchase, such defect(s) will be repaired or replaced with a new or  
reconditioned product (at the Company's option) without charge for parts and  
repair labor.  
MONTHS FROM DATE OF ORIGINAL PURCHASE. IN NO CASE SHALL THE  
COMPANY BE LIABLE FOR ANY CONSEQUENTIAL OR INCIDENTAL  
DAMAGES FOR BREACH OF THIS OR ANY OTHER WARRANTY, EXPRESS  
OR IMPLIED, WHATSOEVER. No person or representative is authorized to  
assume for the Company any liability other than expressed herein in connection  
with the sale of this product.  
What is not covered?  
This Warranty does not cover the following:  
Some states do not allow limitations on how long an implied warranty lasts or the  
exclusion or limitation of incidental or consequential damage so the above  
limitations or exclusions may not apply to you. This Warranty gives you specific  
legal rights and you may also have other rights which vary from state to state.  
x
Damage incurred during shipping or transporting the product to the  
Company or a service center  
x
x
x
x
x
Elimination of car static or motor noise  
Defects in cosmetic, decorative or non-operative structural parts  
Correction of antenna problems  
Costs incurred for installation, removal or reinstallation of the product  
Consequential damage to compact discs, USB devices, digital media  
cards, accessories or vehicle electrical systems  
Obtaining Warranty Service  
x
To obtain repair or replacement within the terms of this Warranty,  
call 1-800-323-4815 for the location of a warranty station serving  
your area.  
x
x
x
Damage caused by improper installation, mishandling, misuse, neglect,  
accident, blown fuse, battery leakage, theft or improper storage  
Products whose factory serial number/bar code label(s) or markings  
have been removed or defaced  
Damage resulting from moisture, humidity, excessive temperature,  
extreme environmental conditions or external natural causes  
x
You must prepay the initial shipping charges to the Company.  
The Company will pay the return shipping charges for all  
warranteed products returned to an address within the U.S.A.,  
Puerto Rico or Canada.  
Please package the product securely to avoid shipping damage.  
We recommend using a carrier that provides tracking service to  
prevent lost packages. Lost or damaged packages are not  
covered by this warranty.  
x
x
Please review the “Care and Maintenance” section of your Installation  
and Operation Manual for additional information regarding the proper  
use of your product.  
Provide a detailed description of the problem(s) for which you  
require service.  
 
Garantía Limitada  
NO RETORNE ESTE PRODUCTO A LA TIENDA  
Radios del CD o de los Multimedia  
Audiovox Electronics Corporation (“la Compañía) es una corporación  
comprometida con la calidad y el servicio al cliente, y se complace en  
ofrecerle esta Garantía. Por favor, léala completamente y contacte a la  
Compañía al 1-800-323-4815 por cualquier duda.  
Limitaciones  
LA EXTENSIÓN DE LA RESPONSABILIDAD DE LA COMPAÑÍA BAJO  
ESTA GARANTÍA SE LIMITA LA REPARACIÓN REEMPLAZO  
PROVISTO ARRIBA Y, EN NINGÚN CASO, EXCEDERÁ LA  
RESPONSABILIDAD DE LA COMPAÑÍA EL PRECIO DE COMPRA  
PAGADO POR EL COMPRADOR DEL PRODUCTO.  
A
O
¿Quién está cubierto?  
La Compañía extiende esta garantía al comprador minorista original de los  
productos comprados a un distribuidor Audiovox autorizado en USA, Puerto Rico o  
Canadá. Esta garantía no es transferible o asignable. Se requiere prueba de compra en  
forma de recibo de venta original.  
Esta Garantía está en lugar de todas las otras garantías o responsabilidades.  
CUALQUIER GARANTÍAS IMPLICADAS, INCLUYENDO CUALQUIER  
GARANTÍA IMPLICADA DE MERCANTIBILIDAD, SERÁ LIMITADA  
A
LA  
DURACIÓN DE ESTA GARANTÍA ESCRITA. CUALQUIER ACCIÓN POR  
INCLUMPLIMIENTO DE CUALQUIER GARANTÍA AQUÍ ESPECIFICADA  
INCLUIDA CUALQUIER GARANTÍA IMPLÍCITA DE MERCANTIBILIDAD DEBE  
SER LLEVADA A CABO DENTRO DE UN PERIDO DE 24 MESES DESDE LA  
FECHA DE COMPRA ORIGINAL. IN NINGÚN CASO LA COMPAÑÍA SERÁ  
RESPONSABLE POR NINGÚN DAÑO CONSECUENTE O INCIDENTAL POR  
INCLUMPLIMIENTO DE ESTA O CUALQUIER OTRA GARANTÍA, EXPRESA  
O IMPLICADA, DE NINGUNA FORMA. No se autoriza a ninguna persona o  
representante a asumir por parte de la Compañía ninguna responsabilidad  
diferente a la aquí expresada en conexión con la venta de este producto.  
¿Qué está cubierto?  
La Compañía garantiza que si este producto o cualquier parte del mismo, bajo uso  
normal, se prueba que tiene defectos en materiales o mano de obra dentro de los 12  
meses desde la fecha de compra original, dichos defectos serán reparados o  
reemplazados con un producto nuevo o reacondicionado (a opción de la Compañía)  
sin costos por repuestos o por labor de reparación.  
¿Qué no está cubierto?  
Esta Garantía no cubre lo siguiente:  
x
Daños ocurridos durante el envío o transporte del producto a la Compañía o al  
centro de servicio  
Eliminación de estática o ruido de motor  
Defectos en cosmética, partes estructurales decorativas o no operativas  
Corrección de problemas de antena  
Costos incurridos por instalación, retiro o reinstalación del producto  
Algunos estados no permiten limitaciones sobre el tiempo de duración de una  
garantía implicada o de la exclusión o limitación de daños incidentales o  
consecuentes, entonces las limitaciones y exclusiones antes mencionadas  
pueden no aplicarle a usted. Esta Garantía le da derechos legales específicos  
y usted también puede tener otros derechos que pueden variar de estado en  
estado.  
x
x
x
x
x
Daños consecuentes  
a
discos compactos, dispositivos USB, tarjetas  
multimedia digitales, accesorios o sistemas eléctricos del vehículo  
Daños causados por instalación inadecuada, mal manejo o uso, negligencia,  
accidentes, fusibles quemados, goteras en la batería, robo o almacenamiento  
inadecuado.  
Productos cuyo número de serie o código de barra de fábrica o sus marcas  
hayan sido quitados o borrados  
Obteniendo el Servicio de Garantía  
x
x
Para obtener reparación o reemplazo dentro de los términos de esta  
Garantía, llame al 1-800-323-4815 por la ubicación de un servicio de  
garantía en su área.  
x
x
x
Usted debe pagar previamente los costos de envío inicial  
Compañía. La Compañía pagará los costos de envío de retorno de  
a
la  
Daños resultantes de la humedad, temperatura excesiva, condiciones  
medioambientales extremas o causas naturales externas  
todos los productos en garantía enviados  
USA, Puerto Rico o Canadá.  
a
direcciones dentro de  
x
x
Por favor empaquete el producto de forma segura para evitar daños en  
el transporte. Recomendamos usar una empresa de transporte que  
provea servicio de rastreo para prevenir la pérdida de paquetes.  
Paquetes perdidos o dañados no están cubiertos por esta garantía.  
Provea una descripción detallada del problema o problemas por los  
cuales usted requiere servicio.  
Por favor, revea la sección “Cuidados y Mantenimiento” de su Manual de  
Instalación y Operación para obtener información adicional relacionada al uso  
adecuado de su producto.  
 
Garantie Limitée  
NE RENVOYEZ PAS CE PRODUIT AU MAGASIN  
Radios CD ou Multimédia / Unités principales  
Audiovox Electronics Corporation (la Société) s’engage à la qualité et  
au service des clients, et est content de vous offrir cette garantie. Nous  
vous prions de le lire attentivement et prendre contact avec la Société  
au 1-800-323-4815 avec des questions.  
Limitations  
LA MESURE DE LA RESPONSABILITE DE LA SOCIETE SOUS CETTE  
GARANTIE EST LIMITEE LA REPARATION OU REMPLACEMENT  
MENTIONNES CI-DESSUS ET DANS AUCUN CAS LA RESPONSABILITE  
DE LA SOCIETE N’EXCEDERA LE PRIX D’ACHAT PAYE PAR  
L’ACHETEUR POUR CE PRODUIT.  
A
Qui est couvert ?  
La Société étend cette garantie à l’acheteur d’origine en détail des produits achetés à  
un détaillant autorisé d’Audiovox aux Etats-Unis, Puerto Rico ou Canada. Cette  
garantie ne peut pas être transférée ni aliénée. Preuve d’achat est exigé sous forme  
du récépissé de vente d’origine.  
Cette garantie tient lieu de toute autre garantie ou responsabilité expresses.  
TOUTE GARANTIE IMPLIQUEE, Y COMPRISE UNE GARANTIE IMPLIQUEE  
DE MARCHANDABILITE , SERA LIMITEE A LA DUREE DE CETTE GARANTIE  
ECRITE. TOUTE ACTION POUR RUPTURE D’UNE GARANTIE  
Ce qui est couvert ?  
QUELCONQUE SOUS LA PRESENTE, Y  
COMPRIS TOUTE GARANTIE  
La Société garantit que si ce produit ou une partie de ce produit, sous l’utilisation  
normale par l’acheteur d’origine, dans des conditions normales, s’avère  
défectueux en matériel ou en artisanat, dans 12 mois depuis la date d’achat  
d’origine, de tels défauts seront réparés ou remplacés avec un nouveau produit  
ou un produit reconditionné (à la seule discrétion de la société) sans frais pour les  
pièces de rechange ou le travail réparateur.  
IMPLIQUEE DE MARCHANDABILITE DOIT ËTRE PORTEE DANS UNE  
PERIODE DE 24 MOIS DEPUIS LA DATE D’ACHAT D’ORIGINE. EN AUCUN  
CAS LA SOCIETE NE SERA RESPONSABLE POUR TOUT DOMMAGE  
INDIRECT OU ACCESSOIRE POUR RUPTURE DE CETTE GARANTIE OU  
TOUTE AUTRE GARANTIE, EXPRESSE OU IMPLIQUEE. Aucune personne ni  
un représentant n’est autorisée d’assumer de la part de la société une  
responsabilité autre que celle exprimée ici relatif à la vente de ce produit.  
Ce qui n’est pas couvert ?  
Cette garantie ne couvre pas le suivant :  
Certains états ne permettent pas de limitations sur la durée d’une garantie  
impliquée ou sur l’exclusion ou la limitation des dommages indirects et  
accessoires, tels que les informations ci-dessus ne s’appliquent pas à vous. Cette  
garantie vous donne des droits légaux spécifiques et vous pouvez aussi jouir  
d’autres droits qui varient d’état à l’état.  
x
Des dommages survenus lors de la transportation de ce produit à la  
Société ou à un centre d’entretien.  
x
x
Elimination des parasites de voiture ou le bruit du moteur  
Des défauts dans des parties cosmétiques, décoratives ou structurelles  
non-opératives  
x
x
x
Rectification des problèmes d’antenne  
Obtenir le service de garantie  
Le coût de l’installation, de l’enlèvement ou de la réinstallation du produit  
Dommages indirects aux disques compacts, des engins USB, des cartes  
de média digitales, des accessoires ou le système électrique du véhicule  
Des dégâts survenus à cause de la manipulation mauvaise, l’installation  
incorrecte, mauvaise utilisation, négligence, des accidents, des fusibles  
sautés, fuite de la pile, du vol et du stockage incorrect  
x
Pour obtenir la réparation ou le remplacement dans les termes  
de cette garantie, appelez 1-800-323-4815 pour avoir  
l’emplacement d’une station de garantie qui dessert votre région.  
Si le produit est envoyé pour un service de garantie vous devez  
payer les frais de transportation de départ. La Société payera la  
transportation de retour pour tout produit sous garantie si le  
produit est retourné à une adresse située aux Etats-Unis, Puerto  
Rico ou Canada.  
x
x
x
x
Produits soumis à l’enlèvement ou la dégradation du numéro de série  
d’usine/étiquettes de code à barres ou des marquages.  
Des dégâts survenus  
à
cause de la moisissure, l’humidité, des  
x
x
Assurez-vous que le produit soit bien emballé pour éviter des  
accidents pendant la transportation. Nous recommandons un  
transporteur qui fourni un service de dépistage pour éviter la  
perte des paquets. Des paquets perdus ou endommagés ne sont  
pas couverts par cette garantie.  
températures excessives, des conditions environnementales extrêmes ou  
des causes naturelles externes  
Veuillez revoir la section Soin et Entretien de votre Guide d’Opération,  
pour avoir des informations supplémentaires quant à la bonne  
utilisation de votre produit.  
Fournissez une description détaillée des problèmes que vous  
voulez faire résoudre par le service de garantie.  
 
 
 
Audiovox Electronics Corporation  
Hauppauge, NY 11788  
Technical Assistance: 1-800-323-4815  
© 2007 Audiovox  
Ver. 013007  
Printed in China  
 

Invacare Oxygen Equipment HF2E540M9 User Manual
Ives Door 436
JVC Camcorder GR AX860 User Manual
JVC Webcam VN SE400U User Manual
Kenmore Washer HE5T User Manual
Kentrox Computer Hardware AI296 User Manual
Kenwood Blender BL650 User Manual
Kettler Rowing Machine 7976 300 User Manual
Keys Fitness Fitness Equipment ST DFIDL User Manual
Kompernass Sander XQ2 User Manual